Used Swing Chisel for sale (2,795)

Condition: used, Year of construction: 2015, operating hours: 9,583 h, 2015 | Caterpillar 314E LCR with 1 excavator bucket | Used Tracked Excavator | 9583 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 48800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 56 approved ✅ 11 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Crsdsyyp Tajpfx Al Toc TILT BUCKET IS NOT INCLUDED. Good operating excavator, drivetrain a bit noisy, installed Cat product link system, camera and Oilquick quick coupler, 1 bucket , hydraulic oil level a bit low, good engine performance , autolube leaks a bit from hose, small play on swing drive as well as pins of the boom and the blade cylinders 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40585 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2013, operating hours: 10,349 h, 2013 | Volvo EC220DL with 1 excavator bucket | Used Tracked Excavator | 10349 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 44900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 65 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: TILT BUCKET IS NOT INCLUDED. Good operating excavator for its hours, a little bit water is in the transfer case of the swing motor (water went trough the dipstick cover) but there is no major issue with this. There is a little difference in travel speed between the two drive motors in fast travel mode (left driver motor is a little slower). Generally a nice machine! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40584 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Codpfx Aeyyww Hel Tsrc ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,800 rpm, total length: 2,000 mm, total width: 1,300 mm, total height: 1,500 mm, overall weight: 800 kg, No. 3276 Sliding table saw Kölle K 45 Codpfx Aszbu Evsl Torc Used Sliding table length approx. 2000 mm Sliding table with swing arm and fence rail Max. cutting height 145 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 2800 / 3600 rpm Manual saw blade tilting 0° - 45° Manual cutting height adjustment Table size 1180 x 1150 mm LW Adjustable upper saw blade guard Transport dimensions approx. 2000 x 1300 x 1500 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, mileage: 143,392 km, power: 330 kW (448.67 HP), first registration: 05/2022, empty load weight: 14,763 kg, maximum load weight: 17,237 kg, overall weight: 32,000 kg, tire size: 385/65R22,5, axle configuration: > 3 axles, wheelbase: 5,600 mm, next inspection (TÜV): 05/2026, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, onboard computer, parking heater, truck registration, Mercedes Arocs 3445 8x4 | Leaf-leaf suspension | Automatic transmission, emergency braking assistant | Swing tailgate | Multifunction steering wheel | Radio, Bluetooth, Fleetboard | Heated mirrors, power windows | Meiller steel tipper with Bordmatic | Tyres: 385/65R22.5 315/80R22.5 | Subject to errors, prior sale reserved. Csdpfjzbui Isx Al Torc

Condition: new, Brand new PERRYmix model HVP 2000 stainless steel conical mixer for gentle powder mixing: Crodpszbub Rjfx Al Tec - Maximum working volume of 2000 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 5.5 kW electric motor via NORD gearbox. - Swing arm driven by 1.5 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 1000 with stainless steel arm and tilting half-circle top cover)

Condition: new, Brand new PERRYmix model HVP 600 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 600 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 2.2 kW electric motor via NORD gearbox. - Swing arm driven by 0.37 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: Crodpfozbubwjx Al Tec - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 300 with stainless steel arm and tilting half-circle top cover)

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, total height: 2,187 mm, overall weight: 6,360 kg, number of axes: 5, This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Csdpfx Alex D Sc No Terc Machine Benefits Technical machine benefits: • Jog Feedrate X, Z, B, Y Axis: 0–5000 mm/min • Max Cutting Diameter: 460 mm • Max Cutting Length: 795 mm • Bar Work Capacity: 80 mm • Spindle Automatic Tool Setter: Included • Sub-Spindle Tool Setter: Included • Spindle Speed Ranges: 2 • Spindle Nose: JIS A2-8 • Through-Spindle Hole Diameter: 91 mm • Total Power: 40 kVA Extra information Sub-Spindle:C Axis in Sub-Spindle: IncludedC Axis Index in Sub-Spindle: 0.001°Sub-Spindle Speed: 6000 rpmSub-Spindle Speed Ranges: 1Sub-Spindle Nose: JIS A2-5Sub-Spindle Through Hole Diameter: 43 mmSub-Spindle Drive Motor: 11 / 7.5 kWSub-Spindle Chuck Ø: 170 mmHead Chuck Ø: 250 mmMedia:High Pressure Coolant: IncludedChip Conveyor: IncludedFume Extractor: IncludedAutomatic Barfeed: Hydrafeed Multiservo Mod MSV, IncludedPart Catcher: IncludedTurret:Rotary Tool Positions in Turret: 12Rotary Tool Spindle Rate: 6000 rpmTool Size: 25 × 25 mm1 Radial Driven Tool Holder: Included1 Axial Driven Tool Holder: Included Dimensions Machine Depth 3994 mm

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 18 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,140 kg, empty load weight: 1,860 kg, loading space volume: 9.5 m³, loading space width: 2,300 mm, loading space length: 5,500 mm, loading space height: 750 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible.* 6 units in stock, RAL 7043 3 units available in the short term, other RAL colors available on request Available in the short term, RAL 2011 Other models and sizes available from stock in Paderborn. You can view our stock levels on our website. Roll-off container according to DIN Technical description: * Internal dimensions: 5500 x 2300 x 750 mm * Usable volume: 9.5 cbm * Tare weight: 1860 kg * Floor 5 mm S235 * Side walls 3 mm S235 * Front wall sloped upwards * All sheets and profiles continuously welded Csdpfx Aszbtlnsl Torc * Combination flap (swing and hinged wall, loadable up to 7 tons, spring-loaded) * Standard ladder according to UVV, screwed on, galvanized * 8 lashing eyes in the floor, loadable up to 2.5 tons * Container tested and approved according to DGUV rule 114-010 * Floor-side wall connection 90° * Stringers made of U 90x55x4 mm * Stringer spacing 750 mm * Hook diameter 50 mm, S355 * Hook height 1570 mm * Upper frame round tube Ø89×6.3 mm * Net hook * All moving parts greaseable * Steel guide rollers 159×6.3, length 300 mm * Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, empty load weight: 3,280 kg, maximum load weight: 9,720 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, with side wall extension 900 mm high, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Crsdpfxozbq Rbs Al Tec

Condition: new, empty load weight: 3,490 kg, maximum load weight: 8,110 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, side walls 600 mm high, galvanized, + lattice extension 1,000 mm high, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Crodpfxjzbq Dus Al Tjc

Condition: used, Diamond core drilling machine, drill, REMS Picus S1 Basic-Pack electric diamond core drill + REMS Simplex 2 drill stand, Used machine Manufacturer: Rems Type: Picus S1 Overall dimensions: Width: 670 mm Depth: 260 mm Height: 160 mm REMS Picus S1 Basic-Pack Motor: 1850 W universal motor Speed (under load): ~ 580 rpm Max. drilling diameter in reinforced concrete: Ø 102 mm (up to Ø 132 mm under certain conditions) Max. drilling diameter in brick / masonry: Ø 162 mm Drilling depth: up to 420 mm Weight: approx. 5.2 kg Connections & accessories: Drill bit connection: UNC 1¼ external thread, G ½ internal (water connection) Water supply unit with shut-off valve, quick coupling, and water stop function Multifunctional electronics: soft start, overload protection, idle speed limiter, blockage protection Safety slip clutch Crodpsxpqvrofx Al Tjc REMS Simplex 2 Drill Stand Suitable for core drilling up to Ø 200 mm Drill column: precision, square steel profile Ø 50 mm Adjustable for floor unevenness: 4 screws for correction Slide guide: adjustable on all sides, with preloaded plastic bearings Drive: rack-and-pinion system with ratchet lever operation Clamp and collar for Ø 60 mm gearbox mounting Integrated spirit level, with slide lock for easier adjustment and transport Weight: approx. 12 kg

Condition: ready for operation (used), Lathe, Lathe CA6140, used machine Overall dimensions: 2700 × 1140 × 1750 mm Power rating: 7.5 kW Swing over bed: 400 mm Swing over carriage: 210 mm Distance between centers: 1000 mm Spindle speed: 16–1400 rpm (24 steps) Bed width: 400 mm Cedpfx Ajxacx Hol Tjrc Tool shank size: 25 × 25 mm

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, Equipment: foot remote control, rotational speed infinitely variable, 3000 kg load capacity welding positioner, complete set Horizontal load capacity: 3000 kg, tilted load capacity: 3000 kg 2 gears for tilt adjustment Motor protected by two steel swing doors Very robust design Speed steplessly adjustable from 0.05 to 0.7 rpm (optionally up to 1.5 rpm) Turntable diameter: 1400 mm Tilt up to 120° Height horizontal: 1300 mm, tilted to center: 1050 mm Dimensions: Length 2.0 m x Width 1.4 m Handheld remote control with digital display Cjdpfxsw T S Huj Al Tsrc and dual foot pedal

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 Codpfx Aszbilqol Tsrc • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Additional equipment • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 425 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 17,000 W, total height: 2,230 mm, total width: 1,800 mm, overall weight: 6,460 kg, controller manufacturer: FAGOR, product length (max.): 5,530 mm, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Range I: 0 - 424 rpm • Range II: 425 - 1700 rpm • Axes • X-axis: cross slide • Z-axis: longitudinal slide Cedoybbiuspfx Al Tsrc • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production • A ball screw was replaced about 3 years ago • Accessories: 1 Lynette and various tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Machining Capabilities • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Available CNC Controls • Siemens 802D SL Crodpozbidtefx Al Tec General Data • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Weight: 2200 kg

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck Codpfx Aezbhc Iel Tjrc 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: used, mileage: 37,291 km, power: 96 kW (130.52 HP), first registration: 02/2023, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,120 mm, total width: 2,032 mm, total height: 2,047 mm, loading space length: 2,411 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 0674. TA NB32508 ----LOCATION: 04425 Taucha, Gerichtsweg 4 Phone number for inquiries: Mr. Ralph Bergel: by email: Cedpfx Asvkzrwjl Terc ----EQUIPMENT * Registered as truck (N1) * Passenger-side airbag * Fixed tow bar, 13-pin socket, including trailer stability control (TSC) * Rear swing doors without windows – no interior mirror * LED lighting in cargo area * Heavy Duty cargo area protection package – hardwood load floor (Delignit) with anti-slip coating incl. 3 integrated airline rails and high plastic sidewall cladding * Visibility Package 3 – Exterior mirrors electrically adjustable and heated – heated windshield – washer fluid sensor – exterior mirrors electrically folding – wipers with rain sensor – headlight assistant with day/night sensor – lane departure assistant with drowsiness warning and high beam assistant – rear view camera – Connected Radio audio system, DAB/DAB+, FordPass Connect 8" touchscreen, antenna, control panel and audio remote control on steering wheel – supports Android, Apple CarPlay * Rear view camera with display of the rear trajectory in multifunction display and additional hitching assistance in combination with tow bar * Radio: Audio system 24: Ford audio system including Ford SYNC3 with AppLink, DAB/DAB+, navigation system, radio (FM/AM), 8" display (20.32 cm), 4 speakers, FordPass Connect WLAN hotspot, integrated control panel and remote control on steering wheel, Ford SYNC 3 with touchscreen (hands-free system with voice command, SMS read/send function, Bluetooth, emergency call assistant...) AppLink (extended voice control, private mode, supports Android Auto and Apple CarPlay, capacitive touchscreen technology, ...), dynamic navigation, lane guidance, road map for Western Europe * Blind Spot Assistant incl. Cross Traffic Alert and trailer function * Transmission: 6-speed manual * Anti-lock braking system (ABS) with electronic brakeforce distribution (EBD) * Driver airbag * On-board computer with consumption and mileage data (e.g. remaining range) as well as external temperature display * Third brake light * Flat roof * Headliner in driver's cab – up to partition wall to cargo area * Tachometer * Electronic safety and stability program (ESP) with traction control (TCS) – hill start assist – side wind assistant – safety brake assistant – roll-over protection * Electric front windows – with quickdown/-up function for driver's side * Ford Easy Fuel – Comfort fuel filler and misfuelling protection * FordPass Connect * 240A alternator * Cruise control including artificial leather steering wheel with adjustable speed limiter * Lockable glove compartment * Interior lighting with delay switch-off and front reading lights * Air conditioning at front incl. dust and pollen filter * 70 l fuel tank * Solid color paint * Cargo area lighting with delayed switch-off – after 30 minutes * Cargo floor: Sealed vinyl flooring, "Easy Clean" * Steering column adjustable for height and reach * Emergency brake assist incl. emergency brake light – pulsating brake lights during hard braking * Visibility Package 2 – Heated windshield – exterior mirrors electrically adjustable, heated, and foldable – exterior mirrors with integrated indicators – wipers with rain sensor – headlight assistant with day/night sensor

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm swing diameter 50 mm centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min Cedozbc I Sepfx Al Tjrc spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,030 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,000 W, total height: 2,100 mm, total width: 1,900 mm, overall weight: 5,900 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, product length (max.): 4,400 mm, number of axes: 4, This 4-axis DMG MORI CLX 450 V4 was manufactured in 2022. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control and includes a turret with 12 stations, all with driven tools. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC turning center we have for sale. Contact us for further details. Codpszbcp Nsfx Al Tsrc • Working range: • Max. turning diameter: 400 mm • Max. turning length: 800 mm • Swing over cross slide: 320 mm • C-axis: full interpolation • Main spindle: • Spindle nose: A8 • Spindle motor power: approx. 22/18 kW • Turret and tools: • Turret: 12 stations • All stations with driven tools • Performance: • Rapid traverse (X/Y/Z): approx. 24 / 10 / 30 m/min • Equipment: Tailstock • Power supply: 400 V / 50 Hz • Condition: Checked by DMG service before disconnection; very good condition with all functions working properly. Service report available for review. Additional equipment • Turning tools installed on the machine and included in the offer. Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, empty load weight: 3,280 kg, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Csdpfx Alszbbhks Tjrc

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Cedjzbbgyjpfx Al Terc

Condition: new, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, drop sides 500 mm high, galvanized, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Credpfxszbbg Ho Al Tec

Condition: used, functionality: fully functional, spindle bore: 165 mm, For sale: heavy-duty CNC lathe XYZ SL 1100 / 1500 mm in very good condition. The machine was purchased in 2019 and is ideal for machining large and heavy workpieces in single-piece and small-batch production. Technical specifications Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Year of manufacture: 2019 Control system: Siemens ShopTurn / Siemens CNC 840D Centre distance: 1,500 mm Maximum swing over bed: 1,100 mm Spindle bore: 165 mm Main drive: 70 kW Speed range: up to 660 rpm Bed width: 558 mm Tailstock fitted Automatic central lubrication Coolant system Full enclosure Heavy-duty cast iron machine bed Electric tailstock Cedpfx Alozba N He Tjrc Large chuck Solid heavy-duty lathe design Safety enclosure Coolant system Work area lighting Applications: The XYZ XL/SL series has been specially developed for machining large and heavy workpieces. The solid cast iron construction, high spindle power and large spindle bore enable the cost-effective machining of: Shafts Flanges Rollers Hydraulic components Machine components Steel and cast components The series is designed for workpiece weights of several tonnes and ranks among the heavy-duty industrial machine tools in its class. Condition The machine is in good condition No visible damage Viewing available by appointment Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Centre height: 180 mm Centre distance: 1000 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 205 mm Swing diameter in gap: 560 mm Spindle bore: 51 mm Bed width: 290 mm Csdsykkbrepfx Al Terc Speed range: 46 - 1750 rpm Feeds & threads: yes Quill stroke: 170 mm Quill diameter: 52 mm Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 1850 x 900 x 1380 mm Weight: approx. 1,400 kg Accessories / Special Features: • 3-axis digital readout, HEIDENHAIN • 3-jaw scroll chuck, Ø 200 mm • Gap bed • Steady rest • 4-position quick-change toolpost • Bed stop • Coolant system • Hinged chuck guard • Lighting The machine comes from a training workshop and is in a very well-maintained condition. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany