Used Stp 3000 for sale (6,513)

Condition: used, Year of construction: 2005, turning diameter over bed 935 mm turning dia. over face-slide 600 mm Ksdpfx Afsw Spbmoionc greates pass round over bed 1.600 mm turning length 2.000 / 3.000 mm control 810D / Manual Turn Siemens centre height 475 mm max. workpiece weight between centers 6.000 kg turning speed range - main spindle 10 - 1.100 min/-1 transmission ratio 4 power capacity - main spindel 37 kW max. Torque 8.000 Nm spindle diameter in front bearing 190 mm spindle bore 155 mm type Parat 4 pos. RD 4 number of cross-slides 1 x-axis 850 mm z-axis ca. 2.100 mm quill stroke 300 mm diameter of quill 140 mm capture MK 6 rapid speed X: 8 m/min rapid speed Z: 6 m/min weight of the machine ca. 10,5 t dimensions of the machine ca. 8,00 x 2,30 x 4,00 m Semi-frontal Lathe KREWEMA - HFDM 45 475 x 2000/3000

Condition: good (used), Year of construction: 2004, Koenig bowl tipper - HK 1100/3000 model Ksdpfxoxgrcho Afienc - lifting height - function for removing dough from the bowl - the machine worked with the I-Rex divider and Sancassiano mixer - used - year of construction ca. 2004 - good technical condition - price €4,000 EXW

Condition: new, 2000 mm Working width 400 mm Knsdpfswz Ruhox Afisc Wheel width 400 mm height adjustment 750 - 1100 mm weight of the machine ca. 0,80 t dimensions 2,0 x 0,55 x 1,0 m

Condition: excellent (used), Disc table for glue rollers OSAMA TDM-1300×3000 Set length: 3000 mm Set width: 1300 mm Feed speed adjustable via frequency inverter Year of manufacture: 2018 Knodpfxexdib No Afijc

Year of construction: 2019, condition: used, The EFD machine we are offering has a capacity of 2000 mm, but once the MF and HF adaptation boxes are installed, this travel is limited to approximately 1700 mm. It is equipped with a Siemens 840 D CNC (replaced 3 months ago), with 3 digitized axes: Z, Y (200 mm), and C, a double spindle with dual tailstock controlled separately, 1 MF adaptation box, and 1 HF adaptation box. The machine height is 4400 mm. The maximum workpiece weight on the main spindle is 600 kg. The maximum weight per piece on the double spindle is 50 kg. The converter is transistor-type, with a power output of 300 kW and equipped with three frequency ranges: 100 kHz at 200 kW, 3 kHz and 10 kHz at 300 kW. Parameter monitoring is integrated into the Siemens 840 D CNC. It will control: voltage, current, power, MF or HF frequency, quench flow rate by analog flowmeter, quench water temperature via PT 100 probe, with a color printer included. Optionally, a serial link is available, allowing program transfer to avoid dual programming for the CNC and the RTM 100. SUPPLIED EQUIPMENT: - 1 galvanic isolation mains transformer, 400 V three-phase + earth (for network disturbance protection and operator safety) - 1 SINAC P M/H transistor converter Power: 20 to 300 kW Frequency: 3 to 100 kHz - 1 medium frequency adaptation box with 55 VT 8 transformer 1 capacitor bank for 3 kHz 1 capacitor bank for 10 kHz - 1 high frequency adaptation box without transformer 1 capacitor bank for 100 kHz - 1 manual selector switch for 3 and 10 kHz selection - 1 manual selector switch for 100 kHz or 3/10 kHz selection - 1 standard vertical traversing hardening machine, type HGL 2000, 3-AXIS, equipped with: - 1 SIEMENS 840 D controller (replaced 3 months ago) - 1 X-axis, vertical travel approx. 1500 mm depending on MF and HF adaptation boxes - 1 Y-axis, horizontal travel 200 mm - 1 C-axis spindle rotation, max workpiece weight 600 kg, max diameter 500 mm (according to inductor) - 1 double spindle with dual tailstock - 1 hydraulic circuit with analog flowmeter for quench water - 1 second hydraulic quench water circuit without flowmeter, solenoid valve controlled by program, no flowmeter supplied - 1 simple interface for high frequency inductor connection - 1 simple interface for medium frequency inductor connection - 1 operator access door - Integrated RTM 100 standard process monitoring system in the Siemens 840 D, with color printer - All necessary electrical interconnections for medium, high frequency, and low voltage - Complete documentation in French (user and operating manuals) This installation is highly versatile due to its wide frequency range (low, medium, and high), all provided by a single generator, making it rare on the market. Kjdpfsxc Exhex Afienc The high power rating of 300 kW enables the processing of large or two workpieces simultaneously.

Condition: excellent (used), functionality: fully functional, Diameter: 700mm Knodpoxf Uhwjfx Afisc Spindle hole: 250mm Turning length: 3000mm

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm Knodpfx Asxb Efrofiec turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: good (used), workbench, work table, assembly bench, assembly table, work table -Workbench: with drawers, solid construction -Width: 3000 mm -Depth: 700 mm -Height: 900 mm -Drawers/cabinet doors: 2x each, lockable / without lock/key, see photos -Weight: 206 kg Kjdpfjxbyzhox Afijnc

Condition: new, Lifting capacity 2000 Kg Kodpfx Aevblf Njfisnc Magnetic field mm weight 80 Kg dimensions 0,5 x 0,25 x 0,3 m

Condition: new, functionality: fully functional, machine/vehicle number: FDM-150E/3000, operating speed: 7 mm/s, reverse speed: 9 mm/s, overall weight: 10,000 kg, total length: 2,750 mm, total width: 800 mm, total height: 3,100 mm, pressing force: 150 t, Equipment: documentation/manual, safety light barrier, HYDRAULIC PRESS FOR FOLDING. The double-column hydraulic press FDM-150E/3.000 belongs to the F series and is specially designed for folding operations. It utilizes an optimized hydraulic system with a pressure of 295 Bar, ensuring prolonged durability and reliability. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Features a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Includes upper and lower machined tables made from C45E steel with DIN-650 grooves. The upper table ensures perfect alignment with four cylindrical side guides of 80 mm diameter, equipped with maintenance-free anti-friction bimetallic bushings. • Lower grooved table measuring 3.100 mm x 600 mm. CYLINDER AND HYDRAULIC GROUP • Two double-acting main cylinders with chromed pistons and maintenance-free anti-wear guides. Knodpfxowpg D Us Afijc • Single-speed motorized hydraulic group. Includes cylinder decompression valve. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 7” HMI touchscreen mod. KTP-700 CONFORT located in the electrical panel. Allows programming of operating modes in semi-automatic and automatic, power, stroke, and holding time. It has storage capacity for 300 recipes, where all the previous values can be programmed. • Operation is performed via a low-voltage electric pedal. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector. TECHNICAL SPECIFICATIONS Power tn 150 Engine Power cv 11 Piston Stroke mm 250 Working Speed mm/s 7 Return Speed mm/s 9 Maximum Pressure Bar 295 Front Light mm 3.200 Side Light mm 500 Useful Vertical Light (Free Distance Between Tables) mm 550 Working Height mm 950 Total Front mm 2.750 Total Side mm 800 Total Height mm 3.100 Weight kg 10.000

Condition: used, Year of construction: 2001, Kern 3000 envelope inserting machine. The device is operational, used only occasionally in a backup facility, so it requires cleaning and maintenance. We have two identical machines available; if both are purchased, the price is negotiable. Kodpfx Ajv D Eg Sjfienc

Year of construction: 1990, condition: good (used), machine/vehicle number: 3-201065, Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Feed force infinitely adjustable up to max .: 550 N. Knsdpfx Afedlm Dhsioc Charging time approx .: 30 s elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 181206, cutting length (max.): 3,100 mm, cutting width (max.): 520 mm, MONGUZZI AFD S35/3000 Kodeumwb Njpfx Afionc

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, ITALMACCHINE hydraulic press brake Year of manufacture: 2000 CE CNC control: ESA S 530 Controlled axes: 4 (Y1-Y2-X-R) Bending length: 3050 mm Pressing force: 100 tons No. 4 rear stop reference fingers Tool clamping: Promecam type Safety barriers Weight: 7200 kg Kjdpfx Aow T Thtofienc Motor power: 7.5 kW.

Condition: new, 3000 mm Working width 360 mm Knjdpfx Ajfv Attefisc Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Knjdsw Sm U Djpfx Afisc Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: used, Year of construction: 1996, Bar loader FMB type Turbo ET 425 / 3000 stood on an Emco lathe Kodpfx Ajugv Uaofisnc

Condition: used, TECHNICAL DETAILS - Voltage : 230 Volts Kodpfxsuhaape Afijnc

Condition: ready for operation (used), Year of construction: 2020, Movement X-Axis Movement 3150 Y-Axis Movement 1560 Z-Axis Movement 270 This 3-axis HARMUTH F+3000 wood working machine was manufactured in 2020. It features a robust steel base and heavy aluminum portal for vibration-free milling. The working area measures 3150mm x 1560mm x 270mm. It includes a vacuum table, a high-speed milling spindle capable of 300-24,000 rpm, and a 10-fold tool changer. The machine is controlled via the intuitive Penta-Tec software. If you are looking to get high-quality milling capabilities, consider the HARMUTH F+3000 machine we have for sale. Contact us for more information. Application Types Ksdpfx Aew I H Aajfienc Other Woodworking Machinery

Condition: excellent (used), functionality: fully functional, Sicoma Galletti 4500/3000 twin shaft concrete mixer Knjdpfxew S E H Ss Afiec

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm Knedpfxsfbt Huo Afisc - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Year of construction: 1996, condition: ready for operation (used), There are two Thermoforming Machines TETRA LAVAL 3000 available, current: 30A, voltage: 380V, yera of construction machine 1/ 2: 1995/ 1996. Ksdpfxegbft Re Afijnc

Condition: used, Year of construction: 1998, functionality: limited functionality, turning length: 3,000 mm, turning diameter: 720 mm, Machine for sale on behalf of a customer, open to offers. Inspection possible in the 885xx area. The machine is no longer connected to the power supply. Kodpfxjw Dn Dfo Afionc Defects: Loss of power in the drive during machining; small parts function without any issues, the problem only occurs when processing larger parts.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 3,000 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 3,700 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates you to timely collection by the end of September! Turn-mill center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 3,000 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Turning diameter over cross slide: 740 mm Travels Travel - x2: 875 mm Travel - z2: 3,700 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power supply/frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Knedpsw Dbndsfx Afioc Auxiliary voltage: AC 230 V Connected load: 166 kVA Rated machine current: 215 A Supply fuse: 250 A Total weight: 31.0 t

Year of construction: 1972, condition: ready for operation (used), A horizontal double-sided face and surface grinding machine Diskus is available. Grinding wheel diameter: 600mm, grinding wheel width: 150mm, workpiece dimensions X/Y: 1600mm/3000mm, machine dimensions X/Y/Z: approx. 5000mm/5000mm/3000mm, weight: approx. 11000kg. Documentation available. On-site inspection is possible. Kodsw Azu Ujpfx Afisnc