Universal folding machine

HERA USM III 3000 x 4

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm Iodexaa A Nspfx Ahbetn - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Itodpfox Av Uasx Ahbsn

Condition: good (used), Year of construction: 1990, machine/vehicle number: 79-3, Offer 26091 Technical specifications: - Max. working width: 3200 mm - Max. material thickness at 40 kp / mm² yield strength: 2.5 mm - Bending angle electronically preselectable: 0 – 180° - Operation via hand or foot switch - Maximum opening width / stroke of upper beam: 200 mm - Height adjustment: - of the bending beam: 80 mm - of the lower beam: 90 mm - Upper beam drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Required space approx. W 4200 x H 1550 x D 2200 mm Ijdpfx Asyzpgpshbetn - Weight approx. 3800 kg

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Itedpfxjxwnlts Ahbon Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Iedpsr Ngtfsfx Ahbstn Tools recentely grounded. Bending angle preselection via potentiometer

Condition: new, Year of construction: 2026, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) cut throughout the working length a table for supporting the rear plate Ijdpfx Ahec Ikrqebetn gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: used, Year of construction: 1995, sheet width 3000 mm plate thickness 4 mm work height max. 900 mm 450 mm total power requirement 5,5 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 4250 x 1500 x 1850 mm Equipment: Itedpfxjyk Diio Ahbjn - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions

Condition: used, Year of construction: 1982, sheet width 480 mm plate thickness 3 mm stations 13 weight of the machine ca. 11 t dimensions of the machine ca. 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Isdpfoyqtx Hex Ahbetn Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1999, cutting width: 6.050 mm Isdpfx Ajwzvntshbotn cutting thickness: max. 4 mm length stop range: 10 - 1.000 mm

Condition: excellent (used), Profiling machine by Ras Inventory number: 3954 Manufacturer: Ras Type: Ras 22.12 * 11 stations * Shaft diameter: 28 mm * Band width: 150 mm Itsdpfx Ahjzyy N Ajbon * Band thickness: 1.2 mm * Flying hydraulic shear * Connected power: 5.5 kW