Used Stp 3000 for sale (5,061)

Condition: excellent (used), functionality: fully functional, Roller conveyor with adjustable end stops, Graule RLH, 3 meters long. Njdpfxsztqfhe Ahkowk

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Nsdpjzq Dczjfx Ahkjwk Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: good (used), Approx. 15 units of 5-section wardrobe with bench, C+P – used: Price per unit: €500 (net), disassembled, packed, and loaded at the location! Manufacturer: C+P Möbelsysteme Type: S 3000 Evolo Nwedpfozqzplox Ahkjk Year of manufacture: unknown Dimensions: H 1850 x W 1480 x D 500/815 mm with 150 mm high feet and pre-assembled bench, bench slats made of beech, with integrated height adjustment, 5 compartments, compartment width 300 mm, 5 shortened doors, suspension on pivot bolts, safety swivel lock for padlock with lock protection. Condition: good Available: immediately Location: Leipzig

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Nedpjzqzd Nsfx Ahkswk

Condition: ready for operation (used), Dunkermotoren GR 52.0 T6 11 motor, 88403, V / 2.2A / 3000-8000 rpm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwjdpfx Ahjzqxviskjk

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Njdpovvkmbefx Ahkowk Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Nwodpfx Ahevvkblokok Storage location: Nattheim

Condition: used, Cutting length: 3000 mm Cutting height: adjustable, 0 - 45 mm Saw unit: 1.8 kW Nodpoy Hrzaofx Ahkowk Clamping mechanism: operated via handwheel Location: Nattheim

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 15000876, overall weight: 1,300 kg, power: 2 kW (2.72 HP), controller model: HBG 10, workpiece length (max.): 3,000 mm, bar passage: 60 mm, TECHNICAL DETAILS Workpiece length, max.: 3,000 mm Guide channel diameter: approx. 60 mm MACHINE DETAILS Nwedpfszqcv Tjx Ahkjk Control panel: HBG 10 Drive power: 2 kW Weight: 1,300 kg

Condition: used, Edwards Maglev turbomolecular pump STP XA3203C + SCU1600 Controller. Fully tested. 4 sets available. (EUR 10,500/set) Nsdeztbgvopfx Ahkswk

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 3000 – Our high-performance cutter head debarker for flexible log processing. Our StoMill 3000 is a versatile cutter head debarking machine for the efficient processing of logs with diameters up to 1,200 mm. Log lengths up to 18 m can be processed by manually feeding them in; an automatic infeed system can be integrated on request. The machine can optionally be equipped with a root reducer, thus enabling debarking and root reduction in a single process. Feeding is carried out using a forklift or crane. A touch display and a 16-channel wireless remote control ensure comfortable operation. The StoMill 3000 is therefore ideally suited for operations with varying requirements for wood preparation. Description: For fully automatic debarking and root reduction of hardwood and softwood. Advantages of the system: • Cutter head debarker and root reducer in one machine Nwjdpfjrk Nk Esx Ahkjk • Patented safety cutter blade shaft • Fully automatic process • Operation via wireless remote control • Low energy consumption Technical data: • Debarking shaft with 22 kW or 30 kW drive power • Reducer shaft with 15 kW - 45 kW drive power • For all logs with a length of 2 meters or more • Log diameter: 20 – 120 cm Options: • Chip box • Scraper conveyor for chip discharge • Log ejector / log collection tray

Condition: ready for operation (used), thread length: 3,000 mm, Maximum spindle bore is Ø 80 mm. The possible diameter from the traverse path is max. Ø 250 mm and min. Ø 20 mm. Machining length: 3000 mm. Comes with accessories: change gears, steady rest. For further technical data, please refer to the PDF file. Nwodpfx Ahsv Huihekek

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Nwsdpfx Aozd Srdjhkek Equipment, detailed description: see documents.

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 30,000 W, total height: 1,970 mm, total width: 1,900 mm, overall weight: 6,000 kg, product length (max.): 3,310 mm, number of axes: 5, This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details. • Working capacity: • Distance between centers: 1,020 mm • Maximum swing over covers: 580 mm • Swing diameter between centers: 470 mm • Maximum turning diameter (standard tools): 410 mm • Maximum turning diameter (driven tools): 340 mm • Main spindle: • Type: Big Bore ASA 8 • Air blow system for the self-centering chuck • Spindle opening and closing possible during rotation • Axis travel: • W: 825 mm • Rapid traverse: • X: 25 m/min • W: 25 m/min • Z: 30 m/min • Y: 12.5 m/min • Sub-spindle: • Connection: Flat 140 • Maximum speed: 6,000 rpm Nwsdpfxezpwu Us Ahkok • Tool turret: • Type: OKUMA • Tool positions: 12 • Driven-tool power: 7.1 kW / 4.1 kW • Maximum driven-tool speed: 6,000 rpm Additional equipment • LNS Quick Load Servo III bar feeder • Bar interface preparation • Right-side chip conveyor • Finished-part catcher arm • MSCTN80 A8 collet chuck with various collets • Tool holder kit • Kitagawa BB210 self-centering chuck • Kitagawa B206 self-centering chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Code: 0460 Brand: SAMCO Model: LL 3000 Nodpszpvy Aefx Ahkewk Belt sander with double goose neck for wood, furniture, window frames, composite materials, aluminium and various Technical data: Cast-iron structure Table length mm 3000 Table width mm 800 Vertical stroke mm 650 Motor Hp 4 N°2 speeds rpm 1450/2800 Automatic table lifting Belt width mm 120 Belt length max mm 8000 Overall dimensions mm 4350 x 1500 x 1550 h Weight kg 600

Condition: used, Year of construction: 1986, brinell hardness 2.802.007 test load capacity 750 kN throat 200 mm checking height 14 mm Control Stiefelmayer Nwsdpfxjyan Sme Ahksk weight of the machine ca. 620 kg dimensions of the machine ca. 360x840x1250 mm Version A, size 1 Test force: 750 kN Type of force application: Spring force load kN Preload: max. 300 kN Load capacity: 200 mm Test height: 14 mm Voltage: 380/220 V Power type: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness testing electronics, type 2.802.007 - Anti-glare screen for frosted glass device Space requirements: 360 x 840 x 1250 mm Weight approx. 620 kg

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA Control Siemens Sinumerik 840D weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Nsdpfxeyan R Ne Ahkowk Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Year of construction: 2011, condition: ready for operation (used), Offered for sale is an Esab CNC plasma cutting machine. Track gauge: 3000mm, max. cutting width: approx. 2500mm, max. positioning speed: approx. 25m/min, cutting process: plasma, control: Esab CNC control. Machine dimensions X/Y/Z: approx. 4425mm/1676mm/1930mm. Inspection by appointment possible. Nwodpozrzpnjfx Ahksk

Condition: good (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, type plate available, Model VR 13/3000 with numerical control, motorized back gauge, blade spacing adjustment, angle adjustment, and rear sheet metal support. Nwedpfx Ahozrzkxskjk

Condition: used, Year of construction: 2026, CW-3000 Water Chiller for CO₂ Laser Engravers and Cutting Plotters Nwodpsi D D Rvjfx Ahkjk The CW-3000 is a compact water cooling system designed for CO₂ laser engravers and cutting plotters, suitable for laser tubes with a power rating of approximately up to 80 W. It maintains a stable coolant temperature, protecting the laser source against overheating and power fluctuations. It is a simple and effective solution for achieving consistent cutting and engraving quality while reducing the risk of production downtime. The unit uses an efficient fan and heat exchanger system, making it lightweight, space-saving, and easy to integrate into existing cooling installations. Why CW-3000 improves process safety and quality Protection of laser components – stable cooling reduces temperature fluctuations inside the laser tube and minimizes the risk of thermal overload of the entire system (tube, power supply, connectors, and water circulation circuit). This ensures safer and more predictable operation. Extended CO₂ laser tube lifespan – maintaining the recommended operating temperature range helps preserve output parameters for longer and delays the need for tube replacement. Improved cutting and engraving quality – stable temperature means stable laser beam power, helping achieve consistent results, cleaner edges, and fewer corrections. Continuous production operation – reduced risk of thermal alarms and cooling-related interruptions ensures a more predictable workflow. Cost-effective operation – simple construction, compact dimensions, and low power consumption make daily operation easier and help reduce maintenance costs. Applications The CW-3000 cooling system is designed for: CO₂ laser plotters and engravers used in light and medium-duty applications where repeatable quality and low operating costs are important. Advertising workshops, prototyping studios, and small production facilities where reliable cooling is required with limited installation space. Recommended operating practices Use clean coolant and regularly check the fluid level; ensure the circulation system remains unobstructed and all connections are leak-free. Provide sufficient airflow around the heat exchanger and cooling fan. Periodically clean the filter and reservoir and check the coolant flow to maintain efficiency and protect system components. Technical specifications Parameter Value Power supply 230 V Current consumption 0.45 A Cooling capacity 50 W/°C Tank capacity 9 L Connections (inlet / outlet) 10 mm Maximum operating height 10 m Maximum flow rate 10 L/min Weight 9.5 kg Dimensions (L × W × H) 49 × 27 × 38 cm Please note!!! This product is a return item with visible signs of wear and dents. No warranty included.

Condition: ready for operation (used), The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico. Nwjdezrn Hmopfx Ahkok

Condition: used, Year of construction: 2010, We offer you: Nwsdpfxszrl E Ho Ahkek 2 units of CNC cylindrical grinding machines Manufacturer: Junker Type: Jumat 3000/50S Year of manufacture: 2010 Control system: Siemens You can find the technical specifications in the images. Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 3,375 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Nwedpfxey Ubvps Ahkjk Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm - Screen: 15/20 mm Applications - Wood waste processing and recycling - Energy generation through wood chips or briquetting

Year of construction: 2017, condition: like new (used), machine/vehicle number: 81100543, The machine is ready for operation and has only been in use for 3 years since its purchase. The device was installed in a production line for soups in 220 ml to 360 ml packages. Production series: SC-3000-XXX Scanning width: 320 mm Optical resolution: 1 pixel = 0.16 mm Rated voltage: L1/N/PE 230V AC Rated frequency: 50 Hz (+/-2%) 1.6 kVA Connected load: 16 A Protection class: IP65 Lamp type: MXR-160HP/20 Operating temperature range: 5°C - 40°C Machine weight: 420 kg Length: 1750 mm Depth: 720 mm Height: 2290 mm EU Declaration of Conformity Option to start the machine on-site. Nwjdozrh D Sspfx Ahksk

Condition: new, Year of construction: 2025, machine/vehicle number: TR0042_ALM_RD56, COMPRESSED AIR DRYER ALMIG ALM-DGO 180 Type: ALM-DGO 180 Delivery quantity: 3.00 m³ / min * * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 5 ° C -Constant pressure dew point from +3° to +5°C for maximum process reliability. -Minimal pressure lice ensures immediate energy savings -Short start and response times ensure fast availability -Optimized heat exchanger design for maximum efficiency -Robust design for reliable continuous operation -Refrigerant R513a: efficient, environmentally friendly and durable Nodpfey Rqw Uex Ahkewk -Low space requirement Max. working pressure 16 bar Max. inlet temperature 70°C Min./max. ambient temperature +5 to +50°C Pressure drop: 0.18 bar Ø power consumption: 0.47 kW Voltage/Frequency: 230V/50Hz Compressed air connection 1" Dimensions: L x W x H: 462 x 399 x 541 mm Weight: 34 kg For new machines, convenient leasing via our house bank is possible. Visit our store. We always have a wide range of new and used compressors in stock!