Used Stone Processing for sale (20,446)

Year of construction: 2014, condition: ready for operation (used), Three machines for heel processing are available. 1) Heel screwing and gluing machine Sabal S60 ORO/KITHGS, year of manufacture: 2014, production capacity: approx. 1400pairs/8h, air consumption: 22l/cycle, machine dimensions X/Y/Z: approx. 800mm/700mm/1950mm, weight: approx. 400kg. 2) Heel screwing and nailing machine Sabal 320, year of manufacture: 2008. 3) Heel shoe sole press USM DVSK-RC. An on-site inspection is possible. Ledpfxoxnp Rfe Ab Ujhn

Condition: used, This Metzner cable and corrugated pipe processing centre is being auctioned online in our industrial auction/machinery auction insolvency auction for PEMOTECH GmbH – Machinery – Tools – Electronics – Office Equipment. Lsdpfx Abexlhf Ae Ushn

Condition: good (used), Year of construction: 2013, E.Büker - Type N76 End Finishing Machine / Beveling Machine - Working range: 6 - 76 mm - Speed: 10-1800 rpm Lhodpfsxnlnmox Ab Usn - Power: 0.75 kW - Base frame - Emergency stop Dimensions: LxWxH 0.7x0.5x1.4 meters / Weight 250 kg Errors and input mistakes excepted

Condition: refurbished (used), Year of construction: 2018, Handtmann Verbufa MBF-1 Lodpfexniyaex Ab Uohn 2018 year After capital renovation

Condition: used, Year of construction: 2018, Sausage Filler Talsa35 S in very good used condition, year 2018, fully functional with accessories, mobile on 2 fixed castors. For technical data, see the nameplate. VAT deductible. Invoice with stated VAT. Shipping possible (costs borne by the buyer). Lhjdpfxoxnc Aho Ab Ujn

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? Lodexm Spzjpfx Ab Ujhn A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Lsdpfexnp Rxex Ab Uehn

Condition: used, Meat Processing Machine Lhjdpfx Abev H Tc Hs Ujn For sale is a used meat processing machine. This stainless steel machine is designed for applications in the meat processing industry. The machine has a capacity of 1,000 liters. Please note that the machine is in need of repair and has not been tested. Dimensions: 1.5m x 1.5m x 1.6m (length x width x height) Condition: Used, in need of repair, untested, sold as seen.

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: AC, total length: 180 mm, year of last overhaul: 2024, working width: 115 mm, tank capacity: 85 l, overall weight: 700 kg, The machine was in operation in a bakery. Afterwards, it was completely overhauled. Lsdpfxexmv Nxs Ab Uohn

Condition: reconditioned (used), CUTTER Model: SWV 330-S Vacuum TIPPER TIE 2007/2008 - MACHINE AFTER GENERAL OVERHAUL THIS IS THE MODEL - TIPPER TIE ALPINA AG WITH A NEW CONTROLLER - ALL SPARE PARTS ARE AVAILABLE FOR THIS MODEL. Height: 2250 mm Width: 3300 mm Length: 2800 mm Capacity: 330 l Bowl construction - stainless steel Knife construction - stainless steel Electric power supply: 400V 50Hz 3N Total power: 141 KW - Knife rotation: 540/960/1930/2880/3850/4050.-smooth adjustment Lsdpot Sv Ulofx Ab Uehn - Bowl rotation: 3.5 / 6.5 / 10 / 13.5 - Mixing speed: -70/120 - bowl rotates to the left - Power: 141 kW - Weight approx. 7800 kg - Number of knives – 6 pcs. - THE MACHINE HAS A 3-MONTH WARRANTY ON MECHANICAL PARTS

Condition: used, Year of construction: 2002, Vacuum machine / vacuum unit VAMA 530 S in very good used condition, fully functional with gassing function, mobile, with 3 insert shelves. For data, see the nameplate. No guarantee or warranty. Price incl. VAT. Invoice with VAT shown. Shipping possible (costs borne by the buyer). Lhodpexncrpsfx Ab Usn

Condition: repair required (used), Year of construction: 2014, 1 off OMS Polyurethane machine model IMPACT 100 2 off heated tanks 250 Litres each . Fitted with Promass 80 metering . 1 off Mixing head and drive unit size 200 1 off Stainless steel heated tank 1000 Litres. Lhsdpfx Abjxmvtdo Ujn 4 off motor and pumps. 1 off Tool-temp heating unit . 2 off control unit and frame work . Can be loaded , The buyer is responsible for transport

Condition: used, Year of construction: 2017, FICEP GEMINI G32 HPE. Year 2017. MAXIMUM LENGTH 6100mm MINIMUM LENGTH 1250mm MAXIMUM WIDTH 3100mm MINIMUM WIDTH 800mm. DRILLING CAPACITY Ljdpfx Absxmvn Uo Uehn MAXIMUM HOLE DIAMETER DRILLED / MILLED 40mm (250mm) MINIMUM PLATE THICKNESS 5mm MAXIMUM PLATE THICKNESS THAT CAN BE DRILLED 80mm MAXIMUM PLATE THICKNESS WITH HPR 260XD 38mm PRODUCTION PIECE 64mm EDGE CUTTING 27mm WITH BEVEL CUT 45 DEGREES PRODUCTION PIECE 45mm WITH BEVEL CUT 45 DEGREES EDGE CUTTING.

Condition: ready for operation (used), JWE dehairing machine for pigs with separator. Dimensions: 270x100cm Internal dimensions: 210cm Test run possible Lodpfsxmu Aqex Ab Ujhn

Condition: excellent (used), Stork NUOVA 24 CW eviscerating machine. with complete new upper -and lower cam suitable for broilers draws the whole intestine pack with lungs out of the product in a single movement present liver , heart and gizzard in optimum position optimum lever quality 24 drawing units high pressure spraying section collecting vessel with central water drain Lhedeq Avdnspfx Ab Uen electrical safety device can be by passed by means of by pas guide made primarily of stainless steel and other non-corrosive materials

Year of construction: 2020, condition: used, functionality: fully functional, Miltenyi Biotec Clinimacs Prodigy Automated Cell Processing System. Dimensions 73.5 cm × 40 cm × 48 cm (w × d × h) Weight approx. 70 kg Input voltage 100–240 V~ Power consumption 810 W Frequency 50/60 Hz Pump speed 2–400 mL/min Atmosphere control Gas mix unit for CO2, compressed air, and N2; min. pressure: 1 bar, max. pressure: 2.5 bar Temperature control +4 °C to +38 °C Centrifugation Max. 2,500 rpm (400×g) Microscope camera Max. magnification: 400-fold Monitor 10.1” TFT touchscreen MACS tube sealer For sealing CliniMACS Prodigy Tubing Sets PVC tubes Types of starting material Leukapheresis, bone marrow, cryopreserved PSCs Available cell processing steps Cell washing, density gradient centrifugation, cell activation, fluorescent antibody labeling of cells, cell depletion and / or enrichment via magnetic cell separation, viral transduction, cell expansion, expansion and differentiation of adherent cells, cell culture and medium exchange, formulation of final cell product Tubing Sets and accessories Dedicated CliniMACS Prodigy Tubing Sets and Accessories available IPC/QC Integrated IPC/QC sampling pouches allow sterile sample removal Manufacture and availability Manufactured in Germany and shipped worldwide. Good working condition. Please check out our other listings as well. Lhedpfjttwx Djx Ab Uen

Condition: used, Weighing and Bagging System, comprising of: - Lhodoxmhh Hspfx Ab Uon - Ishida Multihead Weigher (CCW-EM-214/30) - Ilapak Vegatronics VFFS Bagger (S/N: S977/00) with Zodiac printer - Hopper - Takeaway conveyor - Ishida metal detector checkweigher (DACS-W-012) - Gantry

Condition: good (used), Year of construction: 2006, Working height: 900 mm The machine was last used to process Helima's 26 and 45 sprouts. It can be converted to process other types of sprouts. External dimensions: Width: 800 mm Total height: 1170 mm Depth: 900 mm Ljdpjxmgurofx Ab Uohn Weight: approx. 120 kg

Condition: good (used), Year of construction: 2021, Max. sheet length: 3048 mm Max. sheet width: 1524 mm Lsdsxg Nqcspfx Ab Uehn Max. bending length: 2550 mm Max. bending height: 185 mm Sheet thickness (stainless steel): 2.5 mm Sheet thickness (aluminum): 3.0 mm Max. bending angle: ± 135 ° Working height: 1090 mm Total power requirement: 43 kW Machine weight approx.: 19,000 kg Space requirement approx.: 12500 x 7400 x 2600 mm

Condition: excellent (used), Year of construction: 2016, Vacuum filler in excellent condition. Up to 6000 kg/h, year of manufacture: 2016, 10 kW. 100x100 cm 215 cm = height Hopper capacity: 250 L Ledpfx Abjxmuzge Ujhn

Condition: refurbished (used), Year of construction: 2015, pressure: 175 bar, total width: 605 mm, total length: 744 mm, total height: 1,165 mm, water tank capacity: 30 l, input voltage: 230 V, Gama Poly spay machine model” EASY SPRAY -H “ Just serviced ready to plug and go……..( NEW HOSES ) Easy spray hydraulic single-phase, this unique unit incorporates all the easy to use and portability features . OUTPUT : 4 kg /min PRESSURE: 175 bar HOSES LENGTH 230V heated 20m Ljdpfx Abexmbmvs Ujhn TANK CAPACITY : 30 l plus 30 l Can be loaded on buyers transport , Buyer is responsible for transport.

Condition: used, Year of construction: 2013, max. workpiece length 5.130 mm profile spindle 1 Stück main drive 18 kW Format 4 profit H30L e-motion CNC machining center ----- - Includes window tools and existing units - Includes Felder window design software "Flash Frame" and existing programming - Machine from a small business, in very good condition, only a few operating hours Machine can be viewed in operation until the beginning of December 2025! Technical description: ----- Working dimensions: X: 5,130 mm Y: 1,360 mm Lhodjxgu N Djpfx Ab Uen Z: 130 mm Travel paths: X: 6,050 mm Y: 1,790 mm Z: 280 mm - 4-axis milling spindle: 18 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Drilling head DH 20 6H1S: Vertical drilling unit with 14 spindles (9 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) - Disc changer with 24 tool positions. Max. work diameter 240 mm max. Tool height 370 mm - Side pick-up space for 2 tools/units Max. tool diameter 270 mm max. Tool height 270 mm - Mobile pick-up with space for chip deflector slide - Automatic table: 8 workpiece supports with e-motion position control - Vacuum pump 90 m³/h - 6 double x-motion or e-motion insertion aids - Chip conveyor belt - Double straight line laser, line laser for round-arch processing - Handheld terminal for remote control of the axes - Including all existing solid wood clamps and vacuum suction cups as well as horizontal clamps - Automatic central lubrication - CE safety device - Software: "Flash Frame", software for window and frame planning "WOODFLASH" Program editor with CAD function 3D simulator with collision check for Woodflash on the machine - Tools: Wooden windows IV 68, IV 78, IV 92 Front door IV 68, IV 78 Lift-sliding doors IV 68, IV 78, IV 92 Balcony doors IV 68, IV 78 Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 760, 408, 508 mm Lhedpfsxgn A Dox Ab Uen Year 2012 Weight 4500 kg 3d changer 20 fach table-size 920 x 360 mm

Condition: good (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP -U 10M, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, Machine is well maintained and in good working order, tools included Lhjdpfx Absuqi A Hj Uen

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22710, total width: 1,350 mm, total length: 3,300 mm, total height: 2,150 mm, water tank capacity: 50 l, type of input current: three-phase, 1 off OMS Polyurethane machine model “ IMPACT 100 R 1;1 Tank A and B 50 Litres each . Fitted with Promass 80 metering . Ratio min 19 l/min max 110 l/min. Loading pumps. Chiller unit . Just serviced ready to plug and go…….. Lhedpfjxmbkbex Ab Uen Can be loaded , The buyer is responsible for transport .