Splitting Machine for Slab,Strips,Tiles

Breton SPS 300/4T

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual operation. Drive power: 5.5 kW Dwedpsfiuguefx Albjb Polishing disc diameter: 1000 mm

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Dwedpetu U Ebjfx Albsb

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) Dedpfxjyidvds Albowb - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 145 mm, cutting width (max.): 510 mm, overall weight: 400 kg, extraction nozzle diameter: 150 mm, rotational speed (min.): 2,800 rpm, power: 5.5 kW (7.48 HP), STROMAB PS 50/F pendulum cross-cut saw, brand NEW Specification: • condition - new • engine power - 5.5 kW Dwodpfjrdwm Tex Albjb • blade diameter - 500 mm • engine shaft diameter - 30 mm • engine speed - 2,800 rpm • max cutting width - 510 mm • max cutting height - 145 mm • additional extension tables - 2 x 2 m • weight 400 kg • 2024/2025 year of manufacture • noise emission - 85.5 dB (A) • the machine meets CE standards Additional information: • tables visible in the photos included with the machine (2 x 2.0 m) • available within 7-10 working days • the price does not include VAT and transport costs

Condition: good (used), Code: 0749 Dwedpoh T Dzqefx Albsb Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs Dsdpezawm Hefx Albowb - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot-controlled polishing machine RPM500_OSZ2 with oscillation (50 mm) and feed (100 mm) Polishing disc diameter – 1000 mm Djdpfx Aljd Dt D Ijbowb Drive power – 4 kW Dust extraction nozzle diameter – 100 mm Two units are available.

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), Year of construction: 2025, A double roller crusher for sand making, also known as a roller sand making machine, is a processing machine that utilizes two rollers to crush and reshape coarse-grained materials such as rock, stone, and ore into finer particles. This type of equipment is commonly used in the production of construction aggregates, artificial sand, and other materials used in various industries. Here are key features and aspects of a double roller crusher for sand making: 1. Double Roller Design: - The crusher has two parallel, counter-rotating rollers that exert pressure on the material. The gap between the rollers can be adjusted to control the size of the crushed particles. 2. Crushing Mechanism: - The material is fed between the two rollers, and as they rotate, the material is drawn into the crushing zone. The rollers compress and crush the material, reducing it to the desired size. 3. Material Feed and Discharge: - The material is typically fed into the top of the crusher and is crushed between the rollers. The crushed material exits at the bottom of the machine. 4. Adjustable Gap Settings: - The gap between the rollers is adjustable, allowing for control over the final size of the crushed material. This feature is essential for producing materials of different particle sizes. 5. Roller Surface Design: - The surface of the rollers may be smooth or have corrugations to enhance the gripping and crushing action. The choice of roller surface design depends on the characteristics of the material being processed. 6. High Efficiency: - Double roller crushers are known for their high efficiency in crushing and shaping materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 7. Versatility: - These crushers are versatile and can be used for various materials, including hard and soft rocks, ores, and other aggregates. They are particularly suitable for producing artificial sand. 8. Dust and Noise Control: - Some double roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. Application in Sand Making: - Double roller crushers for sand making are commonly used to produce fine aggregates and artificial sand. They are employed in the production of high-quality sand for construction and other applications. 10. Maintenance and Safety: Dwedpfeq Ngamjx Albeb - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Motor and Drive System: - A powerful motor and a reliable drive system are essential components to drive the rotation of the rollers and ensure consistent and efficient crushing. The specific design and features of double roller crushers for sand making can vary among different models and manufacturers. When selecting or using this type of equipment, it's important to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: new, Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Dsdpfx Alji Hplkebewb Weight: 850 kg

Year of construction: 2011, condition: new, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, Electric cable hoist i=28 New in original packaging as a parts carrier or for installation, see pictures Dwodjvylhbepfx Albjb GDR3 H12 Motor ZBR100 B4 B050