Used Sleeve for sale (788)

Condition: like new (used), as-new centers and sleeves, MK5 (sleeves and centers with carbide insert) Iedpjzv Sd Defx Ahyoih

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm W x D x H (open): 1130 x 1220 x 1730 mm Usable height: 500 mm Load capacity: 150 kg Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Spray rate: 4800 L/h Iisdpfx Ahezwb Easyeh Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Condition: good (used), Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling chuck: MK4 chuck -Shaft: Ø 27 mm -Shaft length: 520 mm -Dimensions: Ø 44 x 665 mm Iedpfszdyn Tox Ahyoih -Weight: 5.6 kg

Condition: used, Adjustable cutters on a hydraulic sleeve for the production of log planks (tongue and groove). Current settings: Groove profile width: 58.45 mm Iisdpfx Ahszvnbfjysh Tongue profile width: 53.25 mm Technical data: - Cutter: HW - Cutting circle (ø): ~ 160 mm - Bore: 50 mm - Material: Steel

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 Iiedpfx Aozux Tpohyeh - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, warranty duration: 6 months, Function The TAM 25/600 precisely separates and cuts ejector pins, ejector sleeves, and knockout punches in the shortest possible time. Workpieces with diameters from 0.5 to 25 mm made of tool steel and hard metal can be processed. Your advantages: • User-friendly quick-change system Isdpfx Ahezq Srwsyeih • Fast loading and unloading of workpieces • Separating and cutting to length in a single operation Simply place the workpiece in the quick-change prism, set the desired finished dimension, and separate and cut to length in one step. An optional additional clamping device is available for extremely thin, short, or offset pins. • Additional clamping device for thin, short, and offset pins Precision After separating, the work table is locked in the end position, the length is measured precisely, and ground to the finished dimension using an integrated micrometer feed. The wear of the grinding wheel is compensated by tracking the grinding spindle. Your advantages: The integrated diamond automatically dresses the wheel. On request, CBN or diamond grinding wheels are also available as optional equipment for the TAM 25/600. • Precise workpiece positioning via micrometer screw • Integrated dressing diamond for the grinding wheel • Integrated coolant system to prevent overheating of the workpiece • Trackable grinding spindle, so that the cutting edge of the grinding wheel always remains in the 0 position We also offer overhaul services for your old separating and cutting machine; simply contact us!

Condition: new, Year of construction: 2025, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 65 mm, rapid traverse X-axis: 1,200 m/min, rapid traverse Y-axis: 1,200 m/min, rapid traverse Z-axis: 1,200 m/min, total length: 800 mm, table width: 400 mm, overall weight: 1,550 kg, ELMAG Tool Milling Machine WFM 310 Servodrive The Servodrive series milling machines combine precision and cost-effectiveness, sure to impress any metalworking professional. This top ergonomic design offers easy operation, stepless speed control, and outstanding value for money, making it ideal for workshops, training centers, and toolmaking. Standard Features: - Digital position display - 4 long milling arbors: 16, 22, 27, 32 mm - 3 reducing sleeves: MK 1, 2, 3 - Operating instructions / CE certificate Advantages: - Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw drive on all axes X/Y/Z - Infinitely variable feeds on all axes - Coolant tank integrated into the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED worktable illumination - Vertical milling head with adjustable quill - Includes central lubrication system - Digital spindle speed display - Rapid traverse on all 3 axes - Swiveling milling head +/- 45° - Swiveling control panel - Digital position display for maximum precision on all 3 axes - Spindle rotation clockwise and counterclockwise - Digital speed display - Potentiometer for stepless feed axis control - Selector switch for rapid traverse on milling axes - Coolant pump on/off - Emergency stop switch Technical Data: Drilling capacity in steel: 50 mm Face milling capacity: 125 mm End milling capacity: 40 mm Spindle taper: ISO 40 Speed range: 40 - 2000 rpm Speed settings: stepless Quill stroke: 65 mm Table T-slots / width × spacing: 6 / 14 × 63 mm Vertical table T-slots / width × spacing: 3 / 14 × 63 mm Spindle nose to column distance: 180 - 580 mm Table load capacity: 200 kg Milling head swivel range: ± 45° Spindle nose-to-table distance: 50 - 450 mm Horizontal spindle-to-table distance: 145 - 545 mm Milling table size: 800×400 mm Table travel X × Z: 500 × 400 mm Vertical table surface: 1020 × 225 mm Feeds X/Y/Z: 10 - 1200 mm/min Feed rates X/Y/Z: stepless Motor power: 3,700 W Torque X-axis: 7.7 Nm Torque Y-axis: 7.7 Nm Torque Z-axis: 1.7 Nm Power supply: 400/50 V/Hz Machine dimensions: 800×400×450 mm Length × width: 1500 × 1700 mm Isdpsy Hlx Eefx Ahyeih Height: 2000 mm Weight: 1,550 kg The machine is located at our facility in 71334 Waiblingen-Beinstein, is available immediately, and can be inspected upon request. Please schedule an appointment in advance.

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Iisdpfsy E Hk Hjx Ahyoh Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank Iijdpfow I Uvzex Ahyoh • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Iiodpswh Rp Esfx Ahyeh Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge Iiodpfx Ahow U Eg Roysh * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: used, Year of construction: 1989, functionality: fully functional, grinding wheel diameter: 125 mm, overall weight: 520 kg, collet bore: 25 mm, grinding spindle speed: 500 rpm, power: 1.1 kW (1.50 HP), input current: 20 A, input frequency: 50 Hz, year of last overhaul: 2021, Equipment: rotational speed infinitely variable, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 10000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW Isdew U Ehzjpfx Ahyeih total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! Notice: We would be happy to provide you with a free offer. However, please understand that we only accept inquiries with a complete address edit. 1218 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new 2-axis Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp waldmann * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate!* 6 months warranty !

Condition: good (used), Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder -Cable clamps: cable holder -Type: Round 16-25 mm Iedpfxowqnbwj Ahyeih -Number: 16x holders available -Price: per piece, minimum order 5 pieces -Dimensions: 50/50/63 mm -Weight: 0.1 kg/piece

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helmet, rail holder with folding bracket -Type: HL width 80 mm -Dimensions: see photos -Number: 3x holders available -Price: per piece -Dimensions: 180/140/H130 mm -Weight: 4.3 kg/piece Iiedpfx Ahjwcddfeyjh

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail with ceiling holder -Type: Width 90 mm -Lengths: 1x 3010/2805/515 mm each -Dimensions: see photos Iiedswmq Hhopfx Ahysh -Shipping/Price: complete -Transport dimensions: 3010/650/H150mm -Weight: 136 kg

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve Iisdpfx Aewmq H Uehyjh -Manufacturer: Helmet, running rail helmet rail -Type: Width 65 mm -Lengths: 1x 4000/3190/2000 mm each -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 4000/230/H80 mm -Weight: 85 kg

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, guide rail helmet rail curved, with ceiling holder -Type: Width 80 mm -Length: 3460 mm -Dimensions: see photos -Quantity: 1x helmet rail available Iijdownavnspfx Ahyeh -Transport dimensions: 3460/680/H150 mm -Weight: 91 kg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm Iisdpeygh Unefx Ahyjh -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest Ijdpfx Ahex Rt Euoyeih - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Iiedpfjyn Scljx Ahyoh Number of colors: 8 Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder

Condition: used, tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve, Weldon reduction -Milling adapters: intermediate sleeves, 6 pieces -Type: SK40 MK4 5 pieces / SK40 MK3 1 piece -Price/Delivery: complete Iedpfsu S Tclsx Ahyjih -Total transport dimensions: 190/135/H225 mm -Weight: 7.8 kg/total

Condition: used, tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp Iiedpou Tytyofx Ahyeh -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total

Condition: used, ESTEVE double interior silo unit 2 independent storage cells Capacity 2 x 1,500 kg, totaling 3,000 kg Dry bulk product, likely flour Dimensions: 5300 x 2580 x 2630 mm Electrical supply: 380 V Common support frame for both silos Two metal silo bodies 1 - Filling: connection and piping Ø 80 mm Cell feeding via filling circuit 2 - Storage: 2 cells of 1,500 kg Separation of 2 batches or compatible products Graduated level indicators on both cells Front inspection ports 3 - Discharging: hoppers at the bottom Product directed towards the extraction system 4 - Extraction: mechanical system with rollers Product extraction at the outlet of the cells 5 - Screening: integrated sifter Sifter motor 0.75 kW according to installation sheet 6 - Transfer: pneumatic system RBL 10 Transfer motor 3 kW according to installation sheet Iiodpfx Ahszx Thcoysh Piping circuit of approximately 25 m Distribution piping included 7 - Filtration: textile filter sleeves Motors installed at the bottom Integrated storage, extraction, screening, and transfer Brand: ESTEVE, now integrated into Shick Esteve The ESTEVE JE 2500 double interior silo unit is a professional, used equipment designed for storing dry bulk ingredients. It includes two independent 1,500 kg cells each, for a total capacity of 3,000 kg. The identified use is likely related to flour or compatible powdered dry products. The unit combines storage, mechanical extraction, screening, filtration, and pneumatic transfer in a single installation powered by 380 V. Why this model stands out The JE 2500 is not limited to storage; it brings together several functions necessary for handling a bulk ingredient. Its two cells allow for the separation of two batches or two compatible products, while extraction via rollers ensures the mechanical removal of the product. The integrated sifter and RBL 10 pneumatic transfer system complete the installation for organizing its flow. This configuration is particularly advantageous when a project requires a professional interior flour silo with several pieces of equipment already grouped on the same frame. Key advantages Two independent 1,500 kg cells Total storage capacity of 3,000 kg Mechanical extraction via rollers Pneumatic transfer system type RBL 10 Sifter integrated into the unit Filtration with textile sleeves Filling via Ø 80 mm connection Front inspection ports Graduated level indicators on both cells Unit installed on a common support frame

Year of construction: 1985, condition: ready for operation (used), 2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985 and 1998. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible. The machines are not located in Europe. Iijdeyk Hclepfx Ahyjh

Condition: ready for operation (used), Year of construction: 2001, Number of colors: 8, max. mechanical machine speed: 460m/min, gear pitch: 10mm, print length: 300-1200mm, max. print width with endless sleeve technology: 1270mm, max. print width without endless sleeve technology: 1250mm, max. material width: 1320mm, max. unwind roll diameter: 1000mm, max. rewind roll diameter: 1000mm, sleeve inner diameter: 76mm, sleeve outer diameter: 85mm, max. roll weight: 1,24t, web tension ranges, unwinding without draw: 40-350N, unwinding with draw: 25-350N, rewinding without slitter: 25-450N, rewinding with slitter: 30-450N, draw: 25-450N, suitable materials: LDPE, PP, PA: 20-150µm, HDPE, OPP: 12-100µm, max. laminated films: 120µm, paper: 30-120g/m². Equipment: unwinder, rewinder, control panel, corona treatment, Turboclean ink supply system, numerous printing cylinders, anilox rollers and additional accessories, with documentation. An on-site inspection is possible. Iedpfszuktuex Ahyoih