Used Sleeve for sale (788)

Condition: used, Year of construction: 2008, machine/vehicle number: 0007-2008, 4 chambers with dry steam, glass doors, suitable for this Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Hfedsz Suu Aspfx Ag Eon Strom / Volt: 400

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet Hjdpfxozka T As Ag Ejfn • Touchscreen control

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Hfjdpez H N Hhsfx Ag Eon Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: like new (used), Year of construction: 2023, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, We offer this Comag SLR 9/1 stretch sleeve machine, manufactured in 2023, in like-new condition. Machine type: SLR 9/1 Serial number: C023 Year of manufacture: 2023 Rated voltage: 380 V Phases / frequency: 3+N/50 Hz Rated current at full load: 17.5 A Peak current at start: 22 A Current of the largest load: 4.8 A Interrupting capacity of the safety device: 15000 A Wiring diagram number: C023 If you have any questions or would like more information, please feel free to send us a message or call us. Hsdpfezmt Ncox Ag Ejfn

Condition: used, Year of construction: 1988, A case annealing system is offered for sale. With digital temperature control. Equipped with ammonia dissociator and control cabinet. Inspection possible by appointment. Hedpfxjz Hdffj Ag Ejfn

Condition: used, Year of construction: 2019, Video: ?v=W2V185tm4Fo Hjdpfxsz R Dm Se Ag Ejfn

Condition: used, Year of construction: 2021, Elements: Product transport/transfer area, robot stations, packaging material feed, forming/transfer area, multi-lane magazine/handling area, number of suction stations: 16, with CE marking. An on-site inspection is possible. Hfjdpfxozxhk Ss Ag Esn

Condition: used, Year of construction: 2014, functionality: fully functional, product width (max.): 1,400 mm, Roll winding, laminating, printing, and folding machine for sale. Hfedpoz Rn A Refx Ag Eon -Two printing units with chamber doctor blade system. -Cassoli calender with sleeve embossing. -Film laminating, folding machine with triangular fold. -Packaging machine for rolled goods up to 1400 mm wide. -A Hugo Beck packaging machine for the folded products is also for sale. Further details can be found in the images.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20044G, total length: 5,000 mm, total height: 2,100 mm, total width: 1,500 mm, input voltage: 220 V, power: 4 kW (5.44 HP), For sale is a used sleeve labeling machine, including a shrink tunnel and conveyor belt, taken from an industrial packaging line. The system was used for the automatic application of shrink sleeve labels to bottles, cans, and other containers and is particularly suitable for applications in the beverage, food, and packaging industries. The machine features a robust, industrial-grade design with a stainless steel housing and can be integrated into existing packaging and filling lines. Condition: The system is used and has been partially refurbished. It was last in working order. However, due to its used condition, the sale is made without any warranty regarding completeness, current control function, or suitability for a specific application. An inspection and technical assessment before purchase are recommended. Scope of delivery: Sleeve labeling machine Shrink tunnel Conveyor belt Existing attachments and components as per inspection Individual sale possible: If interested, individual machine components or assemblies can also be purchased separately. Hjdjxvbz Eepfx Ag Ejfn Inspection possible by appointment. Further technical information, images, and dimensions are available upon request.

Condition: good (used), overall weight: 400 kg, Skinetta ASK 450 Stretch Banding Machine Intended Use of the Machine The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink-wrapping machines, the film is pulled tightly around the package before sealing. This tightening is the main advantage of this process, reducing film consumption by up to 20%. A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed (welded) in a very small area, creating a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the protruding film overhang can be reduced laterally. This increases the stability of the container and prevents individual products from falling out sideways in correspondingly grouped containers. With suitable additional devices, a complete closure of the containers is possible by sealing, crimping, and folding the film laterally. The SKINETTA stretch banding machine program includes six basic models for film widths from 25 mm to 200, 290, 440, 590, 790, and 1250 mm. To increase output, two- to four-lane systems are available in addition to the single-lane version. - With the SK series (semi-automatic), the products are grouped on the machine table by an operator. Insertion into the film and the subsequent stretch banding process is triggered either by a foot switch or a two-hand control. Full automation is possible at a later date (except for the SK 200 model). - With the ASK series (fully automatic), the products are fed, grouped, and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming and special equipment based on over 20 years of experience allows adaptation to the most diverse customer tasks with proven standard elements. Technical Data Hsdpjp U T Ifofx Ag Eofn Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 V Power consumption: 6.1 kW Additional equipment: slat chain conveyor You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data Hfjdszk U E Tspfx Ag Eon - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden Hjdpfoy Au Hqox Ag Esfn • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: like new (used), Computer-controlled, Dry-head, Lockstitch Sleeve Setting Machine with Multi-programming Device DP-2100 Perfect condition Warranty & Delivery Component: complete delivery machine The quality assurance of the machines is entirely conferred by our team of professional technicians. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. WORLDWIDE DELIVERY ! We always have more than 1000 machines in stock so that each customer can choose from several options. With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Hjdot Ecvvepfx Ag Eefn

Condition: used, Year of construction: 2009, Overview  This model 4300 DE-ST9 sleeve labeling machine was manufactured by FUJI SEAL EUROPE B.V. in 2009. Photos and an operational video are available, as well as the general layout of the line. Technical details  Manufacturer: FUJI SEAL EUROPE B.V. Model: 4300 DE-ST9 Year of manufacture: 2009 Last format: 0.25 liter  Hfjdpsu Rwdyofx Ag Ejn

Condition: excellent (used), very good condition. video available Hjdpfexyxinsx Ag Esfn

Condition: used, Year of construction: 1989, Universal CNC Milling Machine MAHO MH 600 E2 Travel X: 600 mm Travel Y: 400 mm Travel Z: 450 mm Numerical Command CNC PHILIPS 432 Cone SA40 Spindle speed: from 20 to 4000 RPM Table size: 900 x 480 mm TravelSpindle sleeve travel: 80 mm Year of construction: 1989 1 lubricant tank Voltage: 380 V Width: 2500 mm Depth: 2400 mm Hfodjz Nx Hqopfx Ag Ejn Total height: 2000 mm Weight: approx 3,5 T

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F Hfodpfx Agez Slmwe Een • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: used, Year of construction: 2024, Machine has 0 cutting hours Main spindle machining capacity Max. machining diameter: ø16 mm Max. machining length without re-chucking: 200 mm Max. front drilling diameter: ø10 mm Max. front tapping diameter: M8 Main spindle through-hole: ø20 mm Main spindle speed: max. 12,000 rpm Back spindle Max. back spindle chucking diameter: ø16 mm Max. back drilling diameter: ø8 mm Max. back tapping diameter: M6 Back spindle speed: max. 12,000 rpm Gang tool post (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Turret (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Number of stations: 10 + α Hodpfx Agez R Szls Esfn Tooling Number of mountable tools: up to 32 + α Turning tools on gang tool post: 5 × 16 mm Rotary tools on gang tool post: 5–7 Back tool post: 5 fixed tools Drill sleeve: ø19.05 mm Collet, main and back spindle: 138E Guide bush: F605 Feed rates Rapid traverse, all axes (except X2 and Y2): 32 m/min X2 axis: 16 m/min Y2 axis: 8 m/min Motors Main spindle motor: 2.2 / 3.7 kW Back spindle motor: 0.75 / 1.5 kW Rotary tool drives (gang tool post and turret): 0.69 kW Control and dimensions Control: Mitsubishi Meldas M730 Dimensions (W × D × H): 2,780 × 1,340 × 1,790 mm Weight: 2,900 kg Center height: 1,150 mm Option: LFV technology (Low Frequency Vibration) for chip breaking The machine comes with 5 driven tool holders and one holder for the turret. Note that the machine does not come with barfeeder.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Hfodpfxjz Ibduo Ag Een Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: used, Year of construction: 1988, Tool CNC Milling Machine HERMLE type UWF 1000 CNC Year of construction: 1988 Travel X: 700 mm Travel Y: 550 mm Travel Z: 500 mm Numerical Command: HEIDENHAIN TNC 155 Spindle ISO 40 Spindle: Ø 70 mm Spindle speed: from 25 to 3150 RPM Table size: 1000 x 500 mm Vertical sleeve travel: 100 mm Swivel head Spindle motor: 6,9 kW Weight: 3,3 T Hfjdsz Nx H Dopfx Ag Een Problem on CNC. Machine sold as it is. (Screen from CNC need to be changed)

Condition: used, Year of construction: 2007, Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  - Capacity: 18,000 bottles per hour - Label positions: Full bottle sleeve or partial bottom sleeve Hedpfx Agewhkhhj Eefn - Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  - CLEVER Machines GS 4001 sleeving unit - Shrink tunnel CLEVER Machines STJ 3

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: A self-contained, dedicated tooling system designed for a specific operation within an automated production line. It features a robust, open central frame and standardized, heavy-duty mounting units. The tool directly interfaces with industrial robots in a thermal hazard zone, incorporating advanced installation safety features and a dedicated system for dissipating stray currents. COMPONENT LIST: 1. DESTACO brand main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle indicator (range 5-135°) to facilitate collision-free loading. 2. Eye bolts (lifting lugs) – 4 pieces. 3. Copper grounding blocks (welding grounding) – approximately 2 connection points. Thick copper connections protect the electronics and positioner bearings from welding current. 4. Electro-pneumatic junction box (I/O connection box) – 1 piece. A collective housing for signals from inductive sensors, facilitating communication with the PLC controller. Hjdpfxsz Ng N Tj Ag Ejfn 5. Base blocks (NC blocks) with an X, Y, Z coordinate plate – approximately 25 pieces. Base pillars (so-called shims) guaranteeing perfect spatial positioning of the part. 6. Pneumatic installation in red protective sleeves – a complete supply line hidden within fire-resistant covers, safely routed inside the profiles and through edge feedthroughs. 7. Base frame with a process stand – 1 set. Consists of a galvanized working frame and a black service stand for offline maintenance tasks.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Hfedpjww Tzijfx Ag Esn

Condition: used, Year of construction: 2017, Overview This sleeve labelling and shrinking system was manufactured in 2017 by Germany Krones. The system consists of a Krones Sleevematic sleeve applicator and a Krones Shrinkmat shrink tunnel, designed for the application and shrinking of sleeve labels on bottles and containers of various formats. Technical data - Formats: Various bottle and container formats - Application: Sleeve labelling and sleeve shrinking - Configuration: Krones Sleevematic sleeve applicator + Krones Shrinkmat shrink tunnel - Labelling technology: Sleeve labels Scope of Delivery - Sleeve applicator | Krones | Sleevematic | 2017 | Sleeve label application machine Hjdsztan Eepfx Ag Eefn - Shrink tunnel | Krones | Shrinkmat | 2017 | Sleeve shrinking system

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit Hsdpfxey Ipy Aj Ag Ejfn • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport