Used Semi Automatic Flute Laminator for sale (28,197)

Condition: used, Year of construction: 1976, functionality: fully functional, Year of manufacture: 1976 Ibsdpez Ruhmofx Ahyec Machine was modernized in 2020.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Iedpoz Dtbkofx Ahysbc Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Ijdpfjz Ipunox Ahyjbc 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Semi-automatic PET bottle blow molding machine Manufacturer: FERENC Ibedpfeugu E Rex Ahysc Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine

Condition: excellent (used), KASTOmicut U 2.6 – Semi-Automatic Pivot Frame Bandsaw incl. Long Roller Conveyor For sale is a heavy-duty, semi-automatic pivot frame bandsaw KASTOmicut U 2.6. The machine features infinitely variable cutting speed and is ideally suited for all cross-cutting and mitre tasks (-45°/+60°) on pipes, profiles, and solid materials in workshop environments. The fully hydraulic saw feed and hydraulic material clamping enable semi-automatic, sensitive, and tool-preserving sawing operations. — Features • Hydraulic saw feed • Rotary table as material support • Hydraulic material clamping • Infinitely variable cutting speed • Mitre cuts to both sides from +60° to -45° — Technical data • Dimensions (L × W × H): 760 × 1620 × 2040 mm • Material support height: 950 mm • Total weight: 510 kg • Total power: 2 kW • Cutting speed: 20 – 110 m/min • Saw band dimensions: 3,180 × 27 × 0.9 mm • Saw band guides: Side and back roller guides, replaceable • Material clamping: Mechanical • Saw feed: Hydraulic, continuously adjustable • Saw band tension: Mechanical • Saw band cleaning: Fitted with a replaceable wire brush — Cutting capacities • 90° round (solid/pipe): 160 / 260 mm • 90° flat (W × H) (pipe): 310 × 260 mm • 90° square (solid/pipe): 160 × 160 / 260 × 260 mm • +45° round (pipe): 220 mm • +45° flat (W × H) (pipe): 200 × 200 mm • +60° round (pipe): 140 mm • +60° flat (W × H) (pipe): 140 × 140 mm • -45° round (pipe): 240 mm • -45° flat (W × H) (pipe): 200 × 260 mm • -45° square (pipe): 210 × 210 mm • Minimum remnant length: 30 mm — Condition & Delivery The machine is in perfect working condition and ready for immediate use. • Shipping on a pallet by freight forwarder possible Europe-wide • Additional machines available – check our listings for more offers — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices plus VAT. Subject to change and errors excepted. Iedpfx Ahjxizabsyjbc

Condition: used, Column-guided bandsaw, semi-automatic, METORA - KALTENBACH, type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028, year of manufacture approx. 1993 Cutting range: round Ø 380 mm Square 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw blade speed: 25-108 m/min, infinitely variable Material feed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor drive power: 4 kW Power supply: 400 volts, 50 Hz - Fully hydraulic bandsaw in a two-column design - Hydraulic saw head lowering with infinitely variable cutting pressure adjustment - Lowering speed infinitely adjustable - Hydraulic clamping of the workpiece with hydraulic bundle clamping from above - Hydraulic unit integrated in the machine base - Material feed roller on the feed side with gear motor (not mounted on the machine frame) - Coolant system with coolant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating element for coolant and hydraulics - Length stop, TRENNJAGER type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop base length 6750 mm, stop travel 5650 mm, stop arm can be hydraulically folded up without roller conveyor Footprint of the base machine L x W x H: 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Ibodpfx Aodzqtgohysc Weight of the stop system: approx. 800 kg in good condition

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw - Cutting dimensions: 330mm x 510mm - 60-degree mitre cut - Variable cutting speed Iodpfjzur Dujx Ahyebc - Year of manufacture: 2001

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Isdpepu R Nvofx Ahyebc Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 03-2018, For sale: perfectly preserved and fully operational semi-automatic flexo printing machine for corrugated board, manufactured by the renowned EMproject 89. Built in 2018, this machine is designed for reliable and precise 2-color printing on cardboard packaging. The machine is currently connected to power, fully functional, and ready for work. It is ideal for printing logos, barcodes, and graphics on shipping, industrial, or transport boxes in a single pass. Key Technical Specifications: Manufacturer: EMproject 89 (Serbia) Model: FLEXO PRINTER MS-1700/1400 Year of Manufacture: 03 / 2018 Number of Colors: 2 (Two-color printing) Maximum Cardboard Format: 1700 mm x 1400 mm Voltage: 220 V Condition: Fully operational, well-maintained, testing possible before purchase. Iedjzilvgspfx Ahyjbc The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Price is negotiable for serious buyers upon inspection. We also have other cardboard manufacturing equipment available printing machine (Flexo Printer EMproject 89), automatic paper slitting and rewinding machine YYS-I ( 2023), automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3589 Manufacturer: de Wit Type: WP 2 Ibsdpeya Iu Ijfx Ahysc Year of manufacture: 2007 * Turntable positioning via fixed stop * Adjustable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 2400 mm * Net weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! * Inclusive ramp!!!

Condition: reconditioned (used), functionality: fully functional, overall weight: 400 kg, USED SEMI-AUTOMATIC SAW WITH PNEUMATIC VISE, MEP SHARK 280, Ijdjz H Ixpopfx Ahyjbc

Condition: new, Year of construction: 2026, CORMAK S440R Metal Band Saw The professional CORMAK S440R semi-automatic metal band saw is an industrial-grade machine designed for precise and repeatable cutting of pipes, profiles, and solid materials. Its high power, heavy-duty construction, and fully automated operating cycle ensure reliable performance even under demanding conditions and in serial production. Main Advantages Semi-automatic operating cycle – hydraulic control of the vise and saw arm movement High 4.4 kW motor power enables cutting of difficult-to-machine materials Rigid cast-iron saw arm reduces vibrations and ensures high cutting precision Smooth band speed adjustment – 20–90 m/min (inverter-controlled) Swiveling saw arm enables angled cutting from 60° to the left to 60° to the right Excellent ergonomics – separate control panel with LCD display and clear controls Construction and Technology The CORMAK S440R is based on a stable body and a cast-iron saw arm, which minimizes vibrations and improves cutting quality. The high-quality band drive, controlled by an inverter, allows the cutting speed to be adjusted to the type of material being processed. The 34 mm wide cutting band operates with carbide guide systems, ensuring durability and precision. Cutting Precision and Performance The cutting cycle is performed automatically: material clamping, band start-up, controlled lowering of the saw arm, stopping after the cut, and returning to the starting position. This solution significantly reduces operating time and minimizes errors resulting from manual operation. The angle reading system and arm position memory function support precise and repeatable cuts in serial production. Applications The machine is designed for cutting structural, tool, and stainless steels. It is ideal for cutting pipes, steel profiles, bars, and sections in metalworking shops, manufacturing plants, and tool rooms. It performs excellently in both serial and one-off production. Standard Equipment PLC controller Semi-automatic operating cycle Control console with LCD display Hydraulic control of the vise and saw arm (up/down) Saw arm position memory Digital cutting angle display Saw arm rotation: 60°L – 45°L – 0° – 45°R – 60°R Powered cleaning brush Closed-loop cooling system Bi-metal band saw blade Technical documentation + CE Declaration of Conformity Ijdpfxji Dx R Ns Ahysbc Technical Specifications Minimum cutting diameter Ø5 mm Minimum material length in the vise 30 mm Distance from vise base to floor 780 mm Band dimensions 5200 × 34 × 1.1 mm Total power 4.4 kW Band speed 20–90 m/min Dimensions (L × W × H) 2500 × 1900 × 1450 mm Weight 1100 kg Looking for a reliable semi-automatic metal band saw? Choose the CORMAK S440R and rely on high performance, precision, and professional-grade quality.

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK 1650HG flute laminating machine is a fully automatic, high-performance laminating machine for the precise bonding of printed top sheets to corrugated board or cardboard. It was specifically developed for the production of high-quality packaging and impresses with its high production speed, exact sheet positioning, and reliable laminating quality. Thanks to state-of-the-art servo and PLC control, automatic sheet feeder, and intelligent positioning technology, the KMK 1650HG is ideal for packaging manufacturers who place the highest demands on quality, precision, and productivity. ### Highlights * Fully automatic flute laminating machine * High-precision servo positioning system * Suitable for large sheet formats up to 1,650 × 1,650 mm * Automatic high-performance feeder for top sheets * Uniform adhesive application thanks to stainless steel adhesive roller * Intelligent PLC and touchscreen control * High production output with maximum precision * Robust industrial design for continuous operation * Simple operation and short setup times Iodpfszg E Tyjx Ahyjbc ### Application Areas The machine is ideally suited for the production of: * Corrugated board packaging * Folding cartons * Food packaging * Cosmetic packaging * Pharmaceutical packaging * Display packaging * Presentation packaging * Packaging made of cardboard and corrugated board ### Technical Data * Maximum sheet format: 1,650 × 1,650 mm * Minimum sheet format: 380 × 350 mm * Top sheet: 120–500 g/m² * Bottom sheet: A, B, C, E, and F flute corrugated board, 4-ply corrugated board, and cardboard from 300 g/m² * Positioning accuracy: ±1 mm * Machine power: 25 kW * Adhesives: White glue or starch glue * Machine dimensions (L × W × H): 15.5 × 2.6 × 2.4 m ### Standard Equipment * Automatic high-performance feeder * Automatic pre-stacking system * Servo-controlled positioning system * Stainless steel adhesive roller with uniform adhesive application * Water cooling of the cleaning roller * PLC control with touchscreen * Photoelectric sensors for precise sheet alignment * CE-compliant electrical control ### Optional Equipment * Side paper feed for particularly large and heavy bottom sheets ### Included in Delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ On-site machine commissioning ✅ Free instruction and training for your operating personnel ✅ Comprehensive after-sales service and technical support even after installation ### Machine Type Fully automatic flute laminating machine for cardboard and corrugated board KMK 1650HG Flute Laminating Machine

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm CNC control: B&R PP 45 Ibjdpjxlcpvofx Ahyoc Hydraulic bundle clamping Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, Format: 0x0 Ibjdpfx Aeyxqyrohyoc

Condition: ready for operation (used), Year of construction: 2017, Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available. Isdpfxjw Rqv Ae Ahyebc

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Ibedpfxjw H Naaj Ahyjc Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Ibodpfx Ahomig Tdjyoc Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: used, Year of construction: 2008, Manufacturer: COMEC Model: FUST-P-40 Year: 2008 Type: Semi-automatic filling line Containers: Drums, cans, off-centre-neck containers Max. container height: 500 mm Theoretical output: 200 x 20-litre containers per hour Dosing method: Weight-based, using a load cell Ibedpfxoz Ic Nfs Ahyjc Weighing range: 0.5 to 30 kg Accuracy: 10 g Calibration: Automatic Filling speeds: 2 (high flow rate / low flow rate within the same cycle) Filling spout: With anti-drip valve Conveying: Roller conveyor Capping: Manual placement, tightened using a hand-held pneumatic screwdriver Control: Control panel FAP-200/1 type feed unit - Filter (cylindrical coil): 500 microns - Pneumatic diaphragm pump - Flow rate: 2 to 4 m³/h - Transport trolley Documentation: Available Video: On request

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Ibodpfxsyzf Ucs Ahyec Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included

Condition: used, Year of construction: 2016, functionality: fully functional, Semi-automatic band saw EISMO BOMAR type ERGONOMIC 320.250-DGSH.FDE Year of construction: 2016 Bevel cut 45° Max cutting capacity: Ø 260 mm Max vise opening: 300 mm width Motor: 1,5 KW Hydraulic vise Variable speed drive on the blade rotation Automatic descent Lubricant pump Microspraying system Ibodpfx Aez Syw Aehyec Supplied with some new blades Voltage: 380 V Length: 2000 mm Width: 1200 mm Total height: 1400 mm (in low position) Weight: approx 500 KG

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH Ibjdpfxsi D D A Sj Ahyoc The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Ibedpfx Aoq Dzi Tshyjc Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6153102135, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Ijdevyl Dvepfx Ahyebc Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 14.900 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2026, overall weight: 280 kg, total length: 23,740 mm, total width: 15,000 mm, total height: 20,750 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This machine comes with a 24-month warranty. Upon request, we can also supply you with a suitable loading ramp, a photoelectric sensor for black object detection, or the appropriate machine film! About this model: Our "Starter" pallet wrapper is a semi-automatic stretch wrapper, perfect for those who no longer want to wrap pallets by hand or are seeking an affordable backup unit. Our Vogel Starter is likely the most economical pallet wrapper produced in Europe, without compromising on quality. In contrast to our other pallet wrappers, the range of options on this model is limited, as our aim here was to design a highly standardized pallet wrapper that covers most applications at a cost-effective price. With three programs, you can set both the speed of the film carriage and the turntable, and choose between “cross wrapping” or “up only” wrapping. Top and bottom wraps can also be saved to each program. The brake tension is easily adjusted via the mechanical film brake. Access to the programs can be password-protected, allowing the operator to choose only from the saved settings. Ijdpfx Ahjz E Ikvsyebc This model weighs 280 kg and is rated for loads up to 1200 kg. Our Starter pallet wrappers feature a 1500 mm turntable and can wrap pallets up to 2100 mm high as standard. Automatic pallet detection (using a photoelectric sensor) comes standard, as do adjustable top and bottom wraps. Should the wrapper need to be relocated, it can be easily lifted and moved with a forklift using the integrated fork slots. This model is our recommendation if you want to move away from manual wrapping and are looking for a robust machine made in Europe. About us: Business is about people – that is our conviction! A supplier delivers the goods you order – a partner does more: they help you find the best solution. They support you in achieving your goals! They also stand by your side when problems and challenges arise. That is our philosophy. For over 40 years and now in the 4th generation, we have been the partner to small and medium-sized enterprises when it comes to “stretch wrapping and adhesive bonding.” If you wish, we are happy to advise you on which pallet wrapper from our portfolio best fits your requirements!