Used Disc Flange for sale (8,004)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Codpfxjzx Rz Hs Ailerh Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: used, Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve Crjdpfjpul U Uex Ailsh -Flange connection: T-piece -Type: DN100 -Hole circle: Ø 180 x 18 mm -Dimensions: 450/230/H360 mm -Weight: 45 kg

Condition: used, Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve Cjdpfx Aispul U Rjlorh -Flange connection: T-piece -Type: DN100 -Hole circle: Ø 180 x 18 mm -Dimensions: 450/230/H360 mm -Weight: 34 kg

Condition: good (used), Year of construction: 2016, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, – Capacity: 4 mm Cedpfsz Ha Amsx Ailerh – Hydraulic roller adjustment – Foot pedal operation – Infinitely adjustable speed – Emergency stop – Documentation – 400V

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, overall weight: 2,120 kg, sheet thickness steel (max.): 13 mm, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, sheet thickness (max.): 13 mm, throat depth: 2,700 mm, workpiece weight (max.): 2,000 kg, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Crjdpfxey Tni To Aileh Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick!

Condition: good (used), Year of construction: 1975, overall weight: 6,000 kg, total width: 1,800 mm, total length: 5,000 mm, total height: 2,900 mm, sheet thickness (max.): 12 mm, Flanging and dishing machine Schleiffstein - KbOL 3012 Tank Head Manufacturing  Dishing and Flanging machine up to 12 mm in 260 Nm/mm2 Forming roll optional for sale Radius 50 / 70 / 100 / 150 / 200 / 250 / 300 Fully hydraulic machine Field off aplication heads, bottoms for vessel, tanks, beverage manufacturing tanks, beer tanks Torispherical heads Ellipsoidal heads Spherical bottoms Dished bottem tank construction Crjdpjzz Ipgefx Aileh Flat bottems Sperical dished bottoms Cones     Max. workpiece: 6500Ø Maximum sheet thickness: 12mm Max. dishing radius: 300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 50mm Max height on dishing side:350mm Working speed: 0 - 5000mm/min. Power: 20kW Length: 5000mm Width: 1800mm Height: 2900mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm Cjdpfx Aevzw Tfjilerh - without electric motor

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Crodez I Snkopfx Ailoh Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027 Identification Registration number: ON-68-FS

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: DLM 705, overall weight: 8,000 kg, The machine is in good overall condition. Price is negotiable after inspection. Csdpsz Aquzsfx Ailjrh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic edge banding machine Csdpfx Aioz Evg Eeljrh Information available upon request.

Year of construction: 2021, condition: excellent (used), Insert nut (insert sleeve) machine, Stafast HFM-CF. The machine is configured for M8 nuts with a large flange. The machine is in very good condition. Ready for use. Crodpfx Aijy Ui Tijljh

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, mount diameter: 3,000 mm, For sale: Pullmax F13C forming machine for steel bottoms/ends. Codozrt Aaspfx Ailjrh The machine is in good condition and ready for operation. Inspection possible. Maximum bottom thickness: 13 mm. Maximum diameter: 3000 mm. Included: - Upper forming roll R50 and R30, - Lower forming roll R50.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Cjdpfezvlm Eox Ailerh Application: Water treatment and reverse osmosis pre-filtration

Condition: used, maximum load weight: 23,770 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 04/2004, total length: 13,940 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2004, Additional information: * Type | First axle: Hankook R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Hankook R * Tire size | Second axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension Additional features: * Rear doors * Homepage * Lift axle * SemCollection Semtrade B.V. Cedpfx Aijz I H D Tsljrh Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The prices listed exclude BPM and are only valid for export.

Condition: excellent (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: ARI, Gate valve type JL1040 -Connection: DN80 PN16 Crjdortcddjpfx Ailjh -Quantity: 1x valve available -Dimensions: 310/200/H405 mm -Weight: 21.6 kg

Condition: used, Year of construction: 2021, functionality: fully functional, disc diameter: 400 mm, rotational speed (min.): 915 rpm, power: 1.5 kW (2.04 HP), grinding wheel diameter: 400 mm, type of input current: three-phase, Equipment: emergency stop, motor brake, Felder disc sanding machine CB 400 D, acquired on April 13, 2021, for precise disc sanding of wood workpieces. Suitable for edges, end faces, small components, curves, and fine adjustments in the woodworking shop. Key technical data: - Machine type: Disc sanding machine - Model: CB 400 D - Sanding disc: approx. Ø 400 mm - Speed: approx. 915 rpm - Motor power: approx. 1.5 kW - Voltage: 400 V - Dust extraction connection: approx. Ø 100 mm - Table size: approx. 460 x 200 mm - Table tilt: approx. -45° to +45° - Dimensions: approx. 770 x 460 x 1130 mm Codpfxsztxpns Ailjrh Features: - Practical machine for precise finishing and clean workpiece edges - Suitable for edge and contour sanding, adjusting wood components, and finishing work - Of interest for carpentry shops, model making, training, and makerspaces Warranty exclusion

Condition: excellent (used), Year of construction: 1988, Usable grinding wheel diameter: 500 mm Crodpfxezvm Svj Ailoh Table size: 400 x 800 mm Table tilt downwards/upwards up to: 45/30° Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 2.2 kW Space requirement: 950 x 800 x 1200 mm Weight: 230 kg

Year of construction: 2021, condition: used, functionality: fully functional, T-nut inserting machine for Large Flange T-nuts Credpfx Aiezbu R Eoloh

Condition: used, functionality: fully functional, Year of construction: 2020, Manure spreader with short disc harrow, Volmer T Rubber TRG-W8000, year of manufacture 2020, nominal width 7500 mm, 60 toothed discs 510 mm, 2x16 manure distributors Agrar Pro with 50 mm hose diameter, 10 bar pressure hoses, nitrogen bladder for spring mechanism, 3-point linkage, edge disc 430 mm, side plate on the right, pipe roller 550 mm, hydraulically foldable, warning sign with LED lighting, serial number 090804155. Csdpfx Aijz Hwvkslsrh

Condition: like new (used), Year of construction: 2004, Grinding wheel diameter: 500 mm Crjdozvm N Ujpfx Ailjh Grinding table width in front of the wheel: 240 mm Grinding table tilt downwards/upwards: 45/30° Grinding wheel speed: 1500 rpm Drive motor: 400 V, 4 kW Weight: 280 kg

Condition: good (used), Year of construction: 2022, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Crjdszphtnjpfx Aileh

Condition: good (used), axle configuration: 3 axles, first registration: 06/2019, suspension: air, color: red, Year of construction: 2019, Make axles: JOST Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle Csdez Izr Ejpfx Ailjrh - Twist-locks = Remarks = A&D LPRS24 / 2x Extendable / 1x Lift Axle / Disc Brakes

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, suspension: air, color: blue, Year of construction: 2015, Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Codpfx Aioz Ix Hgsljrh Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.700 kg Carrying capacity: 33.300 kg GVW: 39.000 kg Maintenance, history and condition APK (MOT): tested until 08/2027 Technical condition: good Visual appearance: good Identification Registration number: ON-31-XP Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks = Remarks = Renders FCC / BPW+Disc Brakes /1x Lift Axle / All Containers

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, globe valve, slide gate, diaphragm valve, diaphragm globe valve, flange globe valve Codpjrp Ik Sjfx Ailerh -Manufacturer: KSB, gate valve type BOA-H JL1040 without drive -Connection: DN 40 PN 6 -Quantity: 2x valve available -Price per piece -Dimension: 200/150/H180 mm -Weight: 7.7 kg/pc.

Condition: excellent (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve Credpsrtcc Defx Aileh -Manufacturer: KSB, Gate valve type BOA-C JL1040 -Connection: DN25 PN6 -Number: 4x valves available -Price: per piece -Dimensions: 120/100/H210 mm -Weight: 2.3 kg/pc.