Semi-automatic aluminum circular saw

Plantec UK 352 HA

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed Pjdpfxogwt Rye Apdjrc • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty Prjdpfx Apof Hmn Aodsc all Machines in over-floor construction Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (partially solid materials). The machine is characterized by its ease of use, quick and convenient material changes, and simple miter angle adjustment. The UK 352 HA has a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is automatically activated by pressing a button, and the material is clamped using two pneumatically controlled vertical clamping cylinders. A minimal lubrication system and an air spray gun for cleaning the machine are included as standard with this machine! Connections for a chip extraction system are also available on this machine. Prsdpfx Apegwt Rrsdoc Equipment: • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Incl. 2 pneumatic clamping cylinders (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable material stop (rear) • Extraction device - chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade 350mm • Saw blade not included! You can visit our production facility/showroom at any time to view the desired system. Please feel free to contact us for this purpose. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm Psdpfx Apotqqplodjrc spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm Pjdsimdlropfx Apdjrc - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Psdpfx Ajgi Dl Nspdjrc Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Prsdpfx Aepag R Rjpdjc Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display Pjdpsrb Akmofx Apdjrc - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, suitable for inserts in one Manz trays and small mould and die treatment. Podpfx Aowcfvpjpdorc

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Psdpfx Aey Thxzjpderc Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.