Sheet metal folder, box and pan segments

Prod-Masz Abkantbank mit Segmenten Segmentabkantbank 1,4m/1.5 Klavierbank

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: Nwodpoupxcgofx Af Ssl 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1250 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 265 kg Nedpfx Afscudl Ne Sewl

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by removed upper and lower segments and also the bending beam is divided into segments. In addition, a foot lever is installed to open the upper bending beam. Nwodpfx Afsc Swkhe Sel - Segments of an upper and lower clamping arm expand the application possibilities, - Blocking with the help of a pedal, the hands are free and you can freely position a sheet, - bending bench for universal use in repair and bodywork workshops, - compactly built, modernly shaped, - manual bench for standard tasks, - Segments of an upper span increase the flexibility, Technical specifications: - Max. Working width; 1250mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - Weight 255 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5400 euros Wheels inkl. We are looking forward to your contact!

Condition: new, Year of construction: 2025, Bending machine with segments 1000/1.5mm This model SGR-1000mm is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability Technical specifications: - Max. Working width; 1000 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 235 kg - segmentback width 30,40,50,60,70 and 100 mm Price excl. shipping We provide invoices with 0% of tax Nwedpecvbu Aofx Af Sol Delivery in one week from the order date

Condition: new, Year of construction: 2025, Do you need an efficient and proven bending machine that you will use for years? Look what our satisfied customers write on the website! Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Price: 1,900 euros Delivery date: every week Nsdpfxoh Atafj Af Sewl Cash on delivery and bank transfer in advance Delivery costs PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. Nwjdpowzmcbjfx Af Sjl • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Finger-setting machine with a segmented top clamp PNEUMATIC CYLINDER!!! Max. setting capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Nsdpfxega T Dle Af Sjwl Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. setting angle ----- 0 - 135 degrees Weight ----- 430 kg Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Bending splint e.g. reground Furnishing: - robust, manual folding machine Nwedpfjxaa S Dsx Af Sjl - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: used, Year of construction: 1998, operating hours: 8,260 h, Equipment: all wheel drive, * From municipal hands * Cemetery excavator - mini excavator * Manufacturer Kiefer - Boki 4550 * KW 40 / 1896 cc * VW engine * Operating hours: only 8260 h * Year of manufacture: 1998 * Dimensions: 4900 mm long, 1210 mm wide, 3200 mm high Nedpfx Afotttu Ds Sjwl * ALL-WHEEL STEERING * Road legal * Heating * Hydraulic connection for HAMMER OPERATION * Extension for grab boom * Support extension * etc. * All information without guarantee * We reserve the right to sell the item prior to delivery * Please refer to our terms and conditions

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Click and check our online offer Triple segmented bender SGR-650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 60kg Njdpfx Ash H Dk Rof Sjwl - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 50mm Total length: 1m Height: 45cm Price: 1,900 euros Delivery date: every week Delivery costs are PLEASE ASK We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.