Used Segmented for sale (987)

Condition: refurbished (used), Year of construction: 2002, machine/vehicle number: 28668, functionality: fully functional, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, operating speed: 12 mm/s, table length: 4,000 mm, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, Control:Touch-B Axes:Y,X,R,Z1,Z2,XZ,W and EFL Gsdezn Arpepfx Ak Ujkb Clamping:wila hydraulic clamping Machine weight: approx. 21000 kg Type: PPEB 220/40 EFL Serial number: 28668 Without tools New R axe spindles New belts : Z axes and tilting Machine front side repainted. New venillators inside the heat exchanger. Wila clamping system checked and realigned,two middle segment changed to new ones.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. Gjdpfsyffqqox Ak Uekb The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Year of manufacture: 1991 Grinding length: 4100mm Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Max. speed: 1460 min/-1 Gkjdotqtppepfx Ak Ueb Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Central lubrication system Machine weight approx. 8.2t Space requirement approx. 9.5x2.6x2m

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die (year of manufacture 2024) from DIL Engineering GmbH, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The FiberFlow F50 is designed specifically for research and development (R&D) applications, product development, and pilot trials. With a throughput of up to 50 kg/h, it is ideal for developing and optimizing formulations and processes in the field of alternative proteins, for example, for plant-based or hybrid meat and fish alternatives. By precisely cooling the extrudate, fibrous and meat-like product structures can be created. Gkedjzr Hq Rjpfx Ak Ujb The system has a modular design and can be configured with one or two segments, depending on the requirements. In addition, one or two separate cooling circuits are available, which ensures precise temperature control and, consequently, consistently high product quality. The integration of inline measuring systems is possible and allows for continuous process monitoring and optimization. Particular emphasis was placed on hygienic design, ensuring that the system meets the high requirements of the food industry. Due to the well-thought-out design, cleaning is simple and fast, which is a major advantage, especially in development operations. The FiberFlow F50 can be combined with a wide range of different extruder types and manufacturers. If required, a customer-specific adapter can be manufactured for the mechanical connection to the respective extruder (offered individually depending on the existing extruder). We would be happy to check the technical compatibility with your existing extrusion system in advance.

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit Gkjdpfx Ajzxyrzsk Usb pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. Gkodpfxoxflfme Ak Usb The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. Gedpfxjyf E Tfs Ak Uskb This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 2,000 mm, load hours: 9,635 h, sheet thickness steel (max.): 20 mm, type of input current: three-phase, machine/vehicle number: 541, Equipment: documentation/manual, For sale: Stigal Dynamic plasma cutting machine, year 2018, table size 2 x 6 m. The machine is in very good condition and fully operational, equipped with: - CNC control system - HS Plasma Torch Carrier (Z-axis speed: 165 mm/s) - Voltage-controlled torch height regulator - Dynamic material detection system - Vertical anti-collision system - Automatic UV screen - CAD/CAM software - Segmented extraction table with zone control - Roller guide for thin sheet metal - CEBORA PROF 166 HQC plasma source Technical specifications: Manufacturer: STIGAL Marcin Stępień Model/Name: Dynamic Machine Serial number: 541 Year of manufacture: 2018 Country of manufacture: Poland The Stigal Dynamic plasma machine is an industrial CNC plasma cutting system. It requires 400V three-phase power for proper operation and has a power consumption of 5.5 kW. This is an ideal machine for industrial applications in metal and sheet processing plants. The Plasma-Gas Cutter is designed for fast and precise cutting of steel sheets of various thicknesses. Gjdpfx Aey Exfcok Ujkb Transport within the EU is possible. VAT invoice available.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,600 rpm, total length of planing tables: 900 mm, overall weight: 690 kg, Equipment: CE marking, documentation/manual, HOUFEK Thicknesser 530 mm | 5.5 kW | 4 Knives | Electric Lift Table | 2017 HOUFEK!! HOUFEK THICKNESSER! Professional wood thicknesser from 2017. Used machine, fully functional, ready to work. Solid construction with a weight of 690 kg ensures stability and high-quality material processing. TECHNICAL SPECIFICATIONS: Gjdpfx Aszc U Nksk Uskb - Maximum material width: 530 mm - Minimum material length: 320 mm - Working height range: 3–250 mm - Table length: 900 mm - Table width: 550 mm - Main motor power: 5.5 kW (7.5 HP) - Spindle speed: 4600 rpm - Number of knives: 4 pcs (TERSA) - Spindle diameter: 120 mm - Spindle length: 550 mm - Feed motor power: 0.58 / 0.75 kW - Feed speed: 4 / 8 m/min - Dust extraction port: 150 mm - Power supply: 400 V / 50 Hz - Machine dimensions: 1050 × 1000 × 1200 mm - Weight: 690 kg Equipment: Electric table height adjustment Mechanical table position measurement Automatic star/delta switch Segmental roller pressure Serrated feed roller Four-point table support Two feed speeds: 4 and 8 m/min CE certificate The machine is ideal for a carpentry workshop, sawmill, or company involved in the production of furniture and wooden elements. Condition: used, normal wear and tear appropriate for its age. Possible to inspect on-site. It is possible to test the machine on-site. Financing options are available through leasing or installments. The machine has been technically inspected and is ready for further operation. It is possible to start and test the machine on-site, which allows you to assess its condition and operating parameters before purchase. For the convenience of our customers, we offer financing options in the form of leasing or installments. We assist with the formalities and selection of the most advantageous financing option. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: ZGDS-125, working width: 1,250 mm, bending angle (max.): 165 °, sheet thickness steel (max.): 7 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 130 kg, total length: 1,600 mm, total height: 1,100 mm, warranty duration: 24 months, product length (max.): 1,250 mm, stroke length: 100 mm, The segmented sheet metal bending machine, also popularly known as a segmenter, is used to make complex profiles and bends impossible to make with a classic roofing bender. The segmented design of the beams gives a wide range of possibilities for bending even the most advanced flashings. We offer segment bending machines in three working lengths. Our segmented sheet metal benders are created with roofers in mind, used for standing seam flashings, as well as for bending KARO tiles. In the ZGDS series of segmented sheet metal bending machines, all three rows of stones, i.e. the pressure bar, bending bar, as well as the fixed bar, are removable and adjustable. SEGMENTED SHEET METAL BENDING MACHINE Ju9fautx Gsdjrnmv Depfx Ak Uokb MODEL ZGDS-1125 WORKING LENGTH 1250MM ALL THREE ROWS OF REMOVABLE ADJUSTABLE STONES MAXIMUM THICKNESS OF BENT STEEL SHEET -0.7 MM WEIGHT OF THE MACHINE 125 KG.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, The Format4 profil 45 milling machine is just one of our best-selling machines and offers unique technical solutions. These include the electromechanical MULTI adjustment system for the 250 mm milling fence for parallel guidance and quick adjustment, with a digital display. The electric fine adjustment, which can be activated with the push of a button, provides tenth-of-a-millimeter accuracy, and the milling spindle quick-change system – tool-free changing in just 10 seconds – is just as distinctive a feature of the Format4 profil 45 as the electric milling spindle height adjustment. Maintenance-free and highly precise: the patented pivoting segment guide “Easy-Glide” with a 6-year warranty; 10-year warranty on the anodized aluminum sliding table with precision “X-Roll” guide system. Further technical data: Fence: 1100 mm Milling table opening: 320 mm Extension table: 1100 Milling fence for tool diameter max.: 250 mm Milling spindle quick-change system, standard Mortise and tenon table: 1300 mm Milling spindle control: “Power-Drive” Gedpfx Aszmh Nkek Uokb The machine has the following special equipment: 008 10 HP (7.30 kW) S6/40% 010 Star-delta starter 012 Switching contact for controlling a dust extraction system 014 3-phase CEE coupling for additional equipment with delayed activation (absolutely necessary for operating a feed unit) 016 Stepless speed control 1500–10,000 rpm only with 7.30 kW (10 HP) S6/40% (!002) 103 Milling spindle diameter 30 mm, 140 mm usable height above table 121 Milling spindle locking from the outside 125 Safety rulers “Integral” 500 mm 128 Quick clamping for milling fence 164 Mortise and tenon ruler 1100 mm 212 Swiveling device for feed

Condition: used, Year of construction: 1997, used good condition low mileage cleaned functionally tested partially refurbished completely adjusted Includes 1 sanding unit Combination unit with electronic shoe Dust brush Manufacturer: Bütfering Type: ECO e1100 Year of manufacture: 1997 Machine no.: 34546 Working width approx. mm: 1100 Passage height approx. mm: 150 CE type-tested Number of units: 1 Belt dimensions l x w mm: 1120 x 1900 Feed speed m/min: 4 + 8 Calibrating roller Grooved Gkjdpszkvy Ejfx Ak Ujb Rubberized Combination unit kW: 11 Electronic segmented shoe Dust extraction connection mm: 180 + 140 Space requirement approx. L x W x H mm: 1700 x 1700 x 2000 Weight approx. kg: 1500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in as-is condition, as inspected, without warranty and guarantee

Condition: used, Year of construction: 2005, Working width: 630 mm Godjyvz Nxjpfx Ak Ujkb Planer shaft: strip knives Number of knives: 4 Jointer table length: 2200 mm Jointer fence angle adjustable: yes Folding up jointer tables: manual Maximum thicknessing height: 220 mm Thickness table height adjustment: electric Display of planing thickness: scale Feed speed: 7 / 14 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: segmented Table rollers: yes Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2200 mm Machine width: 1150 mm Weight: 1250 kg

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. Gksdpfoyg Eghox Ak Ueb The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: used, A high-quality liquid transfer and control package consisting of 4 identical Grundfos horizontal multistage pumps and a comprehensive set of industrial blue butterfly valves with flexible rubber expansion joints. Fits for industrial water loops, water treatment boosting systems, pressure maintenance, or process engineering setups. The Package Includes: 1. Horizontal Multistage Pumps:4 units x Grundfos CM15-3 A-R-A-E-AQQE-A-A-N Motor Power: 4.0 kW (Motor Type: MG100LB)Flow Rate (Q): 17 m³/h (74.8 GPM)Nominal Head (H): 44.6 m (63.5 PSI)Max Head (Hmax): 51.1 m (72.7 PSI)Pressure Rating: Max 10 bar (145 PSI) / Max 90 °COrigin: 2. Industrial Valves & Fittings :Large batch of industrial butterfly valves (Blue body with manual lever handles for quick on/off flow isolation).Matching pipe connection segments and end caps. (please see photo) Condition: Used, clean, stored carefully in a dry box inside an indoor warehouse. Gsdpfx Aez Ahmbok Uokb

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 075514503516, A201015148, travel distance X-axis: 100 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 100 mm, Equipment: documentation/manual, Listed price is without VAT. 3D optical metrology microscope in an excellent condition. It has been used in scientific research. Complete industrial measurement system with 5x / 10x / 20x / 50x objectives. Key technical specifications - Motorized Z travel: 100 mm - Motorized XY travel: 100 × 100 mm, high precision - Motorized nosepiece: for 6 objectives - Integrated digitally controllable polarization option Included equipment: - IF-RibSet hardware: - 64-bit high-speed control server - 24-inch monitor, joystick, mouse and keyboard - software modules: - IF-LaboratoryMeasurementModule for 3D data acquisition - IF-MeasureSuite graphical user interface and measurement database - measurement modules for: - profile form measurement - profile roughness measurement - surface texture measurement - volume measurement - 2D image measurement - automation - Alicona Inspect module for geometric difference and tolerance measurement - Edge Measurement Package — includes cutting edge radius, form, chipping, chamfer, contour and multi-edge measurement - IF-Real3DRotationUnit G2 — motorized rotation unit with manual tilt axis and three-jaw collet system - RinglightHP — digitally controlable white LED ring light, 24 segments, 56 LEDs - objectives included: - 5x, working distance 23.5 mm - 10x, working distance 17.5 mm - 20x, working distance 19.0 mm - 50x, working distance 11 mm. Designed for 3D surface measurement, roughness measurement, tool edge inspection, micro-geometry measurement, wear analysis and precision quality control. The system is suitable for metrology laboratories, tool manufacturers, aerospace, automotive, medical device production, R&D centres and universities. Inspection and test before purchase are possible. Gsdozl Hglopfx Ak Uekb

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, operating hours: 12,647 h, power: 37 kW (50.31 HP), pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, oil tank capacity: 600 l, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S 5050mm x 400t Year of manufacture: 2010 Only 12,647 hours and 406,154 cycles!!! Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Overhang: 405 mm Stroke Y-axis: 400 mm Installed height: 720 mm Table width: 140 mm Motor power: 37 kW Oil volume: 600L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 mm Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control: Cybelec ModEva 10S, 2D – Graphic control • Upper tool clamping, Trumpf/Wila, hydraulic • Lower tool clamping, Trumpf system, hydraulic • CNC-controlled crowning • Safety light curtain, Lazersafe • 2 CNC bending aids incl. parking position • Pneumatic die shifting • LCB angle measuring system (2 x front, 2 x rear) • Foot switch Upper tools Gkjdpfx Akozzvfis Uob Trumpf OW203/S 60° R4 H220 130t/m, segmented, approx. 6000mm Trumpf OW203/S 60° R8 H220 130t/m, segmented, approx. 3050mm Trumpf OW300/S 86° R1 H300 80t/m, segmented, approx. 1380mm Trumpf OW210/S 28° R1 H240 40t/m, segmented, approx. 4060mm Trumpf OW200/S 86° R4 H218 80t/m, segmented, approx. 2700mm Lower tools Trumpf EV-W003, 30° R1.0 H100 70t/m, segmented, approx. 1500mm V10 Trumpf EV-W016, 50° R1.6 H150 50t/m, segmented, approx. 4100mm V16 Trumpf EV-W020, 84° R2.0 H100 70t/m, segmented, approx. 3650mm V20 Trumpf EV-W024, 80° R2.5 H100 70t/m, segmented, approx. 3050mm V24 Trumpf EV-W030, 80° R5.0 H100 80t/m, segmented, approx. 6000mm V30 Trumpf EV-W030, 30° R3.0 H100 90t/m, segmented, approx. 3050mm V30 Trumpf EV-W040, 80° R5.0 H100 120t/m, segmented, approx. 4570mm V40 Trumpf EV-W040, 30° R5.0 H100 90t/m, segmented, approx. 3050mm V40 Trumpf EV-W050, 80° R5.0 H100 150t/m, segmented, approx. 1000mm V50 Trumpf EV-W060, 80° R5.0 H100 150t/m, segmented, approx. 4560mm V60 Trumpf EV-W080, 80° R05 H100 150t/m, segmented, approx. 4550mm V80 Trumpf EV-W160, 80° R15 H150 200t/m, segmented, approx. 4000mm V160 Trumpf FWZ H100 120t/m, segmented, approx. 4500mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2003, Bütfering Optimat SBC 111 C Sandy Gsdpey E Rt Eofx Ak Uekb Working width: 1100 mm Abrasive belt width: 1120 mm Abrasive belt length: 1900 mm Upper section adjustment, constant table height Sanding unit type C - 1 combined contact roller sanding unit, with abrasive belt grit compensation and calibration device SWP – steel contact roller (profiled) EG 25 – electronically controlled segmented pressure beam in compact design, element width 25 mm A 3 – triple pole-changing drive motor 3.7/7.5/15 kW Abrasive belt speed: 4.5/9/18 m/s BV – belt blow-off device TE 1 – terminal with 50 freely programmable sanding programs for automated machine control STV – belt feed (carpet feed) driven by continuously adjustable gear motor, feed speed 2.5 - 13 m/min RTE – roller tables at infeed and outfeed FB – rotating cleaning brush on the outfeed side Total connected load approx. 16 kW Operating manual Year of manufacture: 2003 New conveyor belt Price

Condition: used, Year of construction: 2021, machine/vehicle number: MR003895, Neat, lightly used thickness planer with a planing width of 520mm. Electric adjustment of the worktable, digital readout, and pneumatically liftable jointer tables. A machine from the absolute top segment. Gkjdpjy I Nzaofx Ak Uob New price of this machine approximately €20,000. The machine is equipped with the following options: - Tersa cutterblock including 1 set of knives Technical specifications: - Serial number: AB00017878

Condition: used, Year of construction: 1996, Working width: 520 mm Planer shaft: Tersa Number of knives: 4 Jointing table length: 2300 mm Jointing fence angle adjustable: yes Jointing tables folding: pneumatic Maximum thicknesser pass height: 250 mm Thickness table height adjustment: electric Thickness indication: digital Feed speed: 5 / 8 / 12 / 19 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 5.5 kW Motor brake: yes, automatic Extraction connection: 120 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg Gkjdpfx Aey A Hh Tok Ujb

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet metal width: 3240 mm Sheet metal thickness: 2.5 mm Equipment: - Electric rear gauge, 1500 mm Gjdpfx Akozwt Rzj Ujkb - CNC control for bending angle adjustment - Segment tooling - Foot switch

Condition: like new (used), Year of construction: 2022, The robot is designed for multi-segment roadways, with a minimum travel distance of 6 meters and a total possible travel distance of 20 meters, at a height of 3 meters, using special columns. Gkjdpfx Aozzbctek Uob It is also possible to install the robot on the floor, but this requires minor modifications. Year of manufacture: 2022 Serial number: 1306061 Payload: 16 kg Weight: 296 kg Reach: 2013 mm Control system: KR C4

Year of construction: 1983, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1470, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 50 Year of construction: 1983 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 3100 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: 28 segment clamp screws Gkedotqf A Eepfx Ak Ueb Dimensions: Volume 3100 L Length 4900 mm Width 2400 mm Total height 4100 mm Last use: Food (brewery) Technical documentation: Yes

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1124, KIESELGUHR FILTER SCHENK TYPE ZHF S50 Type: ZHF S 70 Year of manufacture: 1977 Material: Stainless steel (V4A) 1.4541 Boiler: Capacity: 4300 liters Permissible operating pressure: 6 bar Permissible operating temperature: 20°C Boiler room: 28 segment clamp screws 78 strainers Gedpfx Akstqf A Re Uskb Dimensions: Volume 4300 L Length 4200 mm width 2200 mm Total height 4800 mm Last use: Food (brewery) Technical documentation: Yes

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Working width: max. 230 mm Workpiece thickness: 10 to 230 mm Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Gksdozxnatjpfx Ak Ueb Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.