Used Segmented for sale (986)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, working width: 1,300 mm, overall weight: 4,700 kg, height adjustment type: electric, Wide belt sanding machine Manufacturer: Viet Type: S3 223 TM Year of manufacture: 2006 (CE) Hfedpfxezd Aylj Agtel Well-maintained calibrating and fine sanding machine from a small carpentry shop/manufacturer, suitable for sanding solid wood, veneer, and lacquered surfaces. Working width: 1300 mm Constant table height, motorized height adjustment of the machine’s upper part (machine is also suitable for inline operation) Automatic workpiece detection, thickness measurement, and infeed protection 1x cross sanding unit, sanding belt dimensions 150 x 5520 mm, speed adjustable 1x combination unit with steel calibrating roller and electronic segment sanding shoe, segment spacing 25 mm, speed adjustable 1x cleaning brush for removing dust from workpieces 1x ionizer to prevent static charge Conveyor belt with vacuum for short/small workpieces Feed rate continuously adjustable Operating voltage: 400 V, 50 Hz, 3 phases Dimensions approx. 2500 x 2850 x 2280 mm (L x W x H) Weight approx. 4700 kg

Condition: good (used), Year of construction: 1987, Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW Hfodozwpm Sjpfx Agtel -Dimensions: 3350/1250/H1600 mm -Weight: 2555 kg

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60 Hedpfx Aeit I Sbogtefl

Condition: new, The price/performance ratio of this model is very good; it is easy to operate, reliable, and has low maintenance costs. Modern PLC control including control cabinet & cable (5 m) Segmented push floor Sieve basket with replaceable sieve Foreign object detection/overload protection Automatic shutdown Potential-free contact CE Motor power: 15.0/18.5/22.0 kW, 400 V, 50 Hz Hedpfxeza Erks Agtjfl Rotor width: 915 mm Rotor diameter: 325 mm Cutting blades: 40 pcs (30 x 30 mm, hollow ground) Counter blade: 1 Sieve size: 7 - 40 mm (round or square, other sieve sizes upon request) Infeed hopper in standard size 920 x 1220 mm Extraction connection 200 x 200mm Dimensions L x W x H: approx. 2,320 x 1,500 x 1,890 mm Weight: approx. 1,980 kg OPTIONAL: additional row of cutting blades on the rotor second counter blade cutting blades, sieve, counter blade made of special steel hopper dimensions according to customer requirements hopper with pneumatically opening lid Note regarding used machines: • Errors and omissions in technical data and subject to prior sale. • Prices quoted are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1991, Working width 1100 mm Number of sanding units 2 st. Used Machine Year of Manufacture: 1991 Condition: Machine fully serviced and inspected Features and Technical Specifications: - Working width: 1100 mm - Working height: 140 mm - Height adjustment: electric - Workpiece thickness display: digital - Units: 2 - 1st unit: Combination unit (roller - shoe) with electronic segmented shoe - 2nd unit: Shoe unit, with electronic segmented shoe - With vacuum conveyor belt - Dust removal brush: yes Hjdezwg Tpopfx Agtefl - Motor power: 2 x 15 kW - Current consumption: 65 A - Exhaust connection: 4 x 200 mm - Sanding belts: 1120 x 1900 mm - Dimensions: 2300 x 1900 x 2500 mm - Weight: 3500 kg

Year of construction: 2003, condition: ready for operation (used), Plastic processing machine manufactured in 2003. This DREHER S 42/65 GFS-15 GR features a powerful 45 kW drive motor and a working width of 650 mm. It includes a protective soundproof enclosure and a granulator function, along with various additional equipment such as a Z-conveyor belt and a discharge extraction station. If you are looking to get high-quality plastic processing capabilities, consider the DREHER S 42/65 GFS-15 GR machine we have for sale. Contact us for further details. Hfedszwg Efepfx Agtol - Drive Power: 45 kW- Motor Speed: 1,470 rpm- Motor Specifications: VEM motors GmbH, 45 kW, 400/690 V, 50 Hz- Rotor Diameter: 420 mm- Working Width / Rotor Width: 650 mm- Feed Opening: approx. 420 × 650 mm- Rotor Cutting Bars: 5 pieces- Stator Cutting Bars: 2 pieces- Enclosure / Features: Protective / soundproof enclosure, granulator function - Additional Equipment & Accessories: - Rotor Feature: Auxiliary flywheel fitted- Soundproof Booth: Segmented steel construction with 100 mm mineral wool insulation, forced ventilation fans, 3 access doors- Discharge & Extraction Station: Granulate extraction fan (5.5 kW motor, 230/400 V), cyclone ZA 160 with pneumatic material diverter, dust filter- Spare Parts: 1 extra set of cutting blades (5 rotor cutting bars, 2 stator cutting bars)

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - 2nd knife row, log spacer, 4-sided segment base, discharge auger with geared motor, Fast hydraulic reverse with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a tried-and-tested and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components for this – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the gate timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cutting hopper design The hopper performs several tasks at once. The material to be shredded is initially fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for shredding. Even with bulky parts, the shredder cuts itself free. If required, hopper extensions and lids with gas springs are also available. Long-lasting rotor bearings thanks to offset design Due to the extreme stress during shredding, a rotor bearing must be particularly robust. To prevent dust or foreign objects from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Hfsdpfx Agepdqzxjtel Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with geared motor - Fast hydraulic reverse with shock valve - Mesh size 15/20 mm List price: EUR 52,320, sold at a special price Location: Ex warehouse 54634 Bitburg - immediately available - The pictures show a machine without a discharge auger; it will be in stock soon.

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine Hjdpfx Agscnxc Notsfl HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: new, Year of construction: 2026, Rojek sliding table saw swiveling The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standard equipped with aluminum sliding table CV 360T with very precise and fixed mounting on hardened bars. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. Engine power 5,3 kW Motor power of separate scoring unit 0,75 (1)* kW Speed of the saw blade spindle 4400 rpm Max. Cutting height of saw blade 315 (350/ 400) 90°: 102 (120/138) mm 45°: 71 (83/86) mm Max. Saw blade diameter with scoring 315 (350/400) mm Spindle diameter of the saw blade 30 mm saw blade tilting 90° - 45°. Diameter of scoring saw blade 120 mm diameter of scoring saw blade spindle 20 mm scoring spindle speed 8530 rpm (50 Hz) table size 400 x 955 mm cutting width 800 (500;1050; 1300; 1500) mm Suction pipe diameter P 100 + 40 (80) mm Hsdpfon D Araox Agtsfl Noise level with technology LpAeq 92,9 dB Net weight approx. 500 kg Sliding table CV360 size of aluminum sliding table 2500 x 360 mm Cutting length 2500 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Hfsdpfxon D Arho Agtel Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Planer-thicknesser machine with 520 mm planing width and motorized thickness table adjustment Stable steel cast iron construction Large, ribbed planer tables made of cast iron, annealed to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure shoes in the infeed 4-knife cutterhead, precision-mounted Helically toothed steel feed roller for particularly even and gentle wood feed Take-off roller with rubber coating Large planer fence, adjustable 90°-45°, readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutterhead Knife changes in seconds When the machine starts, the knives are automatically tensioned by centrifugal force - self-clamping The knife overhang adjusts automatically without adjustment or screwing The planer table is adjusted by a stable and precisely guided parallelogram system, ensuring that the distance between the table tips and the cutterhead remains the same in every adjustment position. The stable aluminum planer fence is anodized as standard, easily adjustable, and offers a generous support surface. The adjustable inclination from 90° to 45° is easily readable from the workstation. Standard with an auxiliary fence for safe planing, even of narrow workpieces. Fig. with optional equipment The connection point for the dust extraction is always in the same position, both for planing and thicknessing. This eliminates the need for additional dust extraction hoses or cumbersome repositioning and routing around the machine. Technical data Total length of planer tables 2300 mm Infeed table length 1180 mm Planing width 520 mm Dimensions of planer fence 1200 x 190 mm Swivel range of planer fence 90 - 45° Min./Max. planing height 3/250 mm Cutterhead diameter / number of knives 100 mm / 4 pcs. Feed speed 5/8/12/18 m/min. Speed 5000 rpm Motor power 400 V / 50 Hz / S6 Dust extraction port diameter 120 mm Weight 1020 kg Top machine Hfsdpfx Agobxz S Hotel Location: Bitburg - available immediately

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - Four-sided segment floor, discharge auger with geared motor, double blade row, log spacer, fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch interfaces guarantee quick adjustments. Functions such as setting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cleaning hopper design The hopper performs several tasks. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is decisive for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas springs are available. Hfedpfxemhh Ido Agtsl Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to the extreme stress it is subjected to during the shredding process. To prevent dust or foreign matter from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of blades: 54 Available blade sizes (mm): 40 x 40 Particle size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Screen size: 15/20 Accessories: - 2nd blade row - Log spacer - Four-sided segment floor - Discharge auger with geared motor - Fast reverse hydraulics with shock valve Location: Available in warehouse 54634 Bitburg

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment Hsdpfx Ajk Dpp Sogtefl - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011 Hjdpozxyrzofx Agtsfl

Condition: excellent (used), functionality: fully functional, planing width: 500 mm, number of blades: 4, total width: 1,700 mm, total height: 1,800 mm, overall weight: 2,000 kg, total length: 2,200 mm, chip removal: 160 mm, extraction connection diameter: 160 mm, height adjustment type: electric, number of feed rollers: 3, number of planer blades: 3, pass-through height: 200 mm, planing height: 200 mm, table width: 500 mm, working height: 200 mm, Four-sided planer made in Czech Republic with adjustable spindles and segmented shaft. MACHINE FULLY OPERATIONAL AFTER INSPECTION. TECHNICAL PARAMETERS: -planing width 500 mm -planing height on both sides 200 mm -planing height on four sides 140 mm (possibility of mounting larger heads up to 200 mm -- planing) -spindle diameter 40 mm -max. tool diameter 200 mm -4 knife shafts -horizontal shaft motor power 2 x 7.5 kW -spindle motor power 2 x 4 kW -feed motor power 0.78 kW -electric height adjustment -feed speed smoothly adjustable -3 rollers in the table -two upper segmented pulling shafts -smooth receiving pulling shaft -guiding ruler -connector diameter 2 x 160 mm MACHINE DIMENSIONS: - length: 2200 mm - width: 1700 mm - height: 1800 mm - weight ~ 2000 kg Possibility of financing the machine through leasing or installments. Just visit our website: jbsmaszyny.pl I invite you to test the machine. Hfjdpfx Aowfihujgtol Where can you see our machines? JBS WOODWORKING MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE Transport of machines all over the world!

Condition: used, Year of construction: 2005, Technical Specifications: - Manufacturer: Costa Hsdpfxjx Ex Tms Agtefl - Model: SA TS 1350 - Year of manufacture: 2005 - Working width: 1,350 mm - Sanding belt dimensions: 2,620 x 1,380 mm - Sanding heights: 3–160 m - Feed speed: 5–25 m/min. - 1st Unit: - Longitudinal sanding unit - Belt dimensions: 2,620 x 1,380 mm - Electronic sanding shoe, Costa system - roller spacing: 32 mm - Segment width: 32 mm - Drive motor power: 11 kW - Dust removal brush diameter: 180 mm - Operator side: left - Height adjustment: motor-driven - Vacuum conveyor belt - Total power connection: 20 kW / 43 A - Width: 1,924 mm - Length: 2,059 mm - Height: 2,185 – 2,375 mm - Exhaust connections: D 2x100 mm + 2x160 mm - Airflow: 4,830 m³/h at 24 m/s - Compressed air: 6 bar, 880 NL/min. - Volts, Hz: 400 / 50 - Voltage fluctuations: max. ±5% - Weight: 3,100 kg - Location: Blomberg warehouse

Condition: used, Year of construction: 2008, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) Hfjdpoyh Hwuofx Agtjl 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Hsdew U Ry Nspfx Agtjfl Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, mileage: 500 km, power: 70 kW (95.17 HP), first registration: 05/2024, fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2024, * ORTEN CityRollup body * All-aluminum body with segmented roll-up doors * 2 compartments at 2,057 mm + 2 compartments at 1,320 mm * DEKRA certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Battery: Lithium Iron Phosphate * Battery capacity: 80 kWh, 400 V * Leaf spring suspension ORTEN Electric Trucks E 35 with roll-up door body: Pricing takes subsidies into account. Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driver's license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats: 1+2 * Rear axle ratio i = 4.1 * Rear axle stabilizer * Disc brakes front * Drum brakes rear * Driver airbag * Fog lights * Heat-insulating glass * Driver's seat, "Luxury" version * Central locking * Electrically adjustable exterior mirrors * Storage compartments in the front doors, left and right * Multimedia 2DIN with USB port * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chocks with holder (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color: graphite black * Rim color: silver * Warning triangle * First-aid kit * Hazard warning lights * Operating manual Technical data of the conversion: * Maximum speed: 85 km/h * Range: approx. 200 km * Battery: Lithium Iron Phosphate (LFP), nickel and cobalt-free * Battery capacity: 80 kWh, 400 V / DC * Charging connector: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 volts / 22 kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70 kW / peak 92 kW * Torque: 410 Nm / peak 730 Nm Technical equipment: * Regenerative braking power * 22 kW on-board charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS-CAN-BUS-controlled charging technology * Electric 5 kW HV cab heater * Color display, showing all relevant battery, BMS, motor and control data * Diagnostic menu for motor control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Structural elements in stainless steel * Battery heating system HV 400 volts / DC (only in charging mode) * Vehicle acceptance test according to § 13 EG-FGV / ECE R100 ORTEN City Rollup body Body dimensions: Overall length: approx. 3,600 mm, floor slope: 0 mm Overall height: approx. 2,360 mm, compartment width: front 2057 / rear 1320 mm Overall width: approx. 2,200 mm, compartment height: 1575 mm Aluminum roll-up doors: Hfsdpoqz R Dmefx Agtel Roll-up with spring assistance. Rubber band for pulling down the roll-up doors. In the closed position, the doors are centrally secured by a locking handle, which is mounted on each side of the front panel and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each compartment, welded to prevent goods from sliding against the door. Underrun protection: Original chassis underrun protection is used. Rear wall: Fixed rear wall. Double-walled, clad with aluminum with a smooth surface. Painting: Exterior of the body painted in RAL color. Lettering can be done according to specifications for an additional charge. Side steps: The side underrun protection consists of running boards with a non-slip surface for the driver. Steps along the body on both sides of the vehicle, between the axles and behind the rear axle.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 308, total length: 1,610 mm, total width: 890 mm, total height: 1,318 mm, overall weight: 350 kg, type of input current: three-phase, input voltage: 400 V, warranty duration: 6 months, year of last overhaul: 2026, product length (max.): 500 mm, product length (min.): 1 mm, pallet spaces: 1 euro pallets, Equipment: type plate available, Used Rheon KN-135 encrusting machine The Cornucopia KN-135 machine is an ideal tool for use in food production, ranging from the ready-to-eat food segment to the production of confectionery and bakery products. Technical data: Product weight range: 10-250 g, Capacity: standard version max. 280 kg/h; aluminum version max. 180 kg/h, Output: 20-100 pieces/min., Product length: 0-500 mm, Outer mass to filling ratio: 1:0 - 0:1, Forming: spherical, bar, and strip, Hopper capacity: 2 x 15 l, Belt speed: 2 – 35 m/min., Power: 1.3 kW. Device features: The device is made of stainless steel and other components approved for contact with food, Large and easy-to-use control system, An intuitive programming system ensures easy and user-friendly operation, Electronic memory function for storing 100 recipes, Built-in Product Memory Unit (P.M.U.) stores and retrieves production parameters for up to 100 recipes, Durable and hygienic hoppers, The innovative design of the device prevents the drive section from touching the dough. Hjdpfozn H Dijx Agtofl

Condition: excellent (used), functionality: fully functional, Working width: 1100 mm Two feed speeds Hfjdpjzxp N Nsfx Agtel 1 unit with rubber roller 2nd unit with segmented pad Total power: 15 kW Pneumatic oscillation Adjustable pad pressure

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained Fasti PC 4000 pivoting bending machine, 3 m long, with a segmented die and a back gauge. Manufacturer: Fasti Model: PC 4000 Condition: very good Year of manufacture: Category ID: 1470 Type ID: 1258 Hfedszxptbopfx Agtjl Machine type: Pivoting bending machine Part number: 7.0559 B For sale: 3 m sheet metal bending machine in good condition, with a back gauge and the option to mount the upper die as a segment. Various die adapters are also available. If interested, an upper tooling platform is also available for an additional 1,000 EUR to the machine price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Working width: max. 230 mm Workpiece thickness: 10 to 230 mm Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT. Hedjzxnatspfx Agtjfl

Condition: used, Year of construction: 2016, Format: 400 x 770 mm Power: 230V / 400V Net Weight: 350 Kg Measurements: (LxWxH):105 x 135 x 130cm Equipment: Mechanical speed: 250 pieces/hour Blank Sheet Width: Minimum 250 mm to Maximum 770 mm Blank Sheet Height: Minimum 150 mm to Maximum 400 mm Allowable Board Thickness: From 1.5 mm up to 3.5 mm thick rigid greyboard Cutting Width (Horizontal): Adjustable from a narrow minimum of 6 mm (perfect for thin hardcover book spines) up to a maximum width of 700 mm. Cutting Height (Vertical): Adjustable from 127 mm up to 355 mm. Automatic 3-Panel Segmenting Automated Material Lift & Feed Integrated Sheet Transport Conveyor Heavy-Duty Rotary Shear Knife Block Digital Operator Display Panel Hfedpfx Agoyxqwketsl Maximum Sheet Feed Capacity: Accommodates a raw board thickness range commonly spanning 1.0 mm up to 4.0 mm

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters Hjdoyxl Epspfx Agtsfl -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.