Scissor lift table Lifting table Lifting platform

Flexlift 1000 Kg

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Hedpfx Aheihpn Nevei Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. Hjdpfexv Dkcox Ahvoi This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Hand control device 2D barcode scanner UPS Quattro-HSK package incl. 4-position tool changer Hjdpfx Ahewt E Tvovji XL drilling head Double drilling spindle in Y-axis Automatic central lubrication Location: Hochheim Availability: approx. week 32/2022

Condition: good (used), Year of construction: 1999, Briquetting press type GP 120 Tandem Hjdpfxeupwx He Ahvsi Briquetting press for briquetting chips, wood chips and dust incl. automatic fill level indicator - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h * 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Switch cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic unit: approx. 300 litre tank for hydraulic oil - Weight: approx. 1,100 kg * 2 = 2,200 kg Used briquetting press in good condition W tong cylinder, tongs (RB 120 reinforced), tong connection flange renewed on one side (left in conveying direction) briquetting | briquette press | briquetting presses | briquette press | briquetting

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Hodpfx Ahsrah Evjvji Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Hjdshrnbkjpfx Ahvsi Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: used, Year of construction: 2005, 2005 BIESSE ROVER B 4.40 FT 3-axis CNC machining center Hjdpfxowmdynj Ahvsi Technical features in the last photo Engine hours on: 45,343 Machine hours in automatic operation (work): 27,267

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator Hedpswdawqofx Ahvji The machine has no door It worked on a cake

Condition: new, table length 2200 mm table width 1500 mm stroke height 1850 mm Hjdpfx Ahsupxwkovoi weight max. in kg 2000 kg 260 mm total power requirement 1,5 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,45 t dimensions of the machine ca. 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 50 l, color: red, overall weight: 2,600 kg, empty load weight: 2,500 kg, lifting power: 1,000 kg/m, lifting height: 3,310 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, shovel volume: 0.4 m³, digging bucket width: 160 mm, Year of construction: 2025, load capacity: 980 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, differential lock, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-T telehandler with the new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter. The new turbo engine is particularly economical, and with the 2-stage hydrostatic drive, it can reach speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and a small turning circle, it is ideal for use on even the smallest areas. The 2210T wheel loader with telehandler comes standard with a quick-change pallet fork and a standard bucket, so you can start working immediately. With the additional hydraulic control circuit, various attachments can be used for the yard loader. The telescopic boom gives the 2210-T an excellent reach. The electric gear on the joystick makes operating the H&R 2210T particularly convenient. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Hodpfx Ahjul Af Djvei Advantages of the H&R 2210T Telehandler • Fully equipped • Efficient engine from Germany (Euro 5) • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cab • Includes pallet forks • Includes standard 150 cm bucket • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake-inch pedal • Rearview camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer coupling • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria upon request Technical specifications Engine: 3-cylinder Perkins Turbo Power: 25 HP Emissions class: Euro 5 Lifting capacity: 980 kg Lifting height: 3310 mm (bottom edge of standard pallet fork) Unloading height: 2796 mm (bottom edge of standard bucket tipped out) Lift time / lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tires: 31 x 15.5 - 15 Accessories and spare parts are available from us. Please provide us with your telephone number when making inquiries!