Used Screwdriver for sale (124)

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! Hedpfxsxmamuj Aitefn ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 Hfsdpfevtf Arsx Aitsn I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Hedsym Ih Ujpfx Aitjfn

Condition: ready for operation (used), Stöger 9278 screwdriving automation SN: SES003743 with 2 x Kistler Z90002.15 sensors SN: 5078913 + 5078912, used, in good condition, 100% fully functional, scope of delivery as per photos. Hjdpfoz Ac I Tox Aitjfn

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric & manual pump, all-steel floor Equipment: - Electric pump - Swing-out tailgate - 14 lashing points Net price: €11,722.69 / Gross price: €13,950.00 Article number: UDB235361811.01 Technical data: • Brand: Unsinn • Model: UDK-B 3617-35-14 • Vehicle type: Three-way tipper • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 366 x 175 x 120cm • External dimensions (LxWxH): 515 x 191 x 198 cm • Loading height of the floor: 77 cm • Permissible total weight: 3,500 kg • Tare weight: 1,245 kg • Payload: 2,255 kg • Chassis: High-loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid longitudinal frame chassis for safe driving characteristics • Aluminum side panels, anodized, double-walled • Steel corner posts, removable • Fold-down rear panel made of aluminum profiles (H=350mm) to protect the rear lights during unloading • Swing-mounted rear flap made of smooth aluminum profiles • Cargo area partition made of aluminum, flexibly pluggable for dividing the cargo area optionally in the middle, into one-third and two-thirds • Anodized, fixed bulkheads (H=1.20m) made of smooth aluminum profiles, ideally suited for advertising stickers • Volume: 7.7 cubic meters of bulk cargo • Zinc-plated toggle lever locks with spring securing • All-steel floor, 3mm hot-dip galvanized – extremely robust • Drawbar and frame hollow profile construction welded and completely hot-dip galvanized • many cross members, resulting in high point load capacity • all transverse and longitudinal supports rest on the ground • 14 lashing eyes, countersunk in the steel floor, symmetrically arranged • Lashing eyes on and under the loading platform can be loaded with up to 1500 daN (kg) and rotated 360° • Patented cargo securing system Spinlock for more flexibility and efficiency in cargo securing, DEKRA certified • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box including cover • Manual pump, included, with matching socket insert for convenient and easy tilting with the cordless screwdriver in case of low battery • Removable remote control for electric hydraulics • Integrated battery charger with Schuko plug • Flat cover with recoil spring to protect dried firewood in bad weather, including storage compartment on the front side panel • Integrated ramp shaft with tensioning device and folding license plate holder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • 13-pole connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light Hfedpfx Asz Ri H Doitjn • Lighting recessed in the rear frame • 2 work lights mounted at the rear for optimal lighting of the maneuvering and unloading area • Reinforced, automatic support wheel, for safe parking of the loaded trailer, load capacity 500kg • Premium maneuvering handle with tensioning strap winder

Condition: used, CNC Profile Processing Line, consisting of: 1) 1-Axis CNC Cutting Centre – Pertici SC55, Year 2018 The Pertici SC55 is a 1-axis CNC cutting centre designed for the automatic cutting of PVC profiles. Thanks to its automatic loading system, the machine automatically feeds the bars, performs the cutting operations according to the production list, and unloads the finished workpieces. The Pertici software is compatible with the main optimization and production management programs available on the market. Hfodpfozg Eggox Aitsn The automatic magazine can accommodate up to 10 bars with a maximum length of 6.6 metres. The cutting area is fully enclosed by protective guards, ensuring maximum operator safety and easy maintenance access. The machine is also equipped with an automatic chip and scrap evacuation system, automatic unloading of finished parts, and a collection table with a capacity of up to 12 workpieces. Main Features 1-axis CNC controlled cutting centre Automatic cutting of PVC profiles Automatic loader for up to 10 bars Maximum bar length: 6,600 mm Automatic bar detection system Compatible with the main optimization and production software Automatic unloading of finished parts Automatic chip and scrap extraction Fully enclosed safety guards with front access Collection table for finished parts Cutting Angles The SC55 automatically performs cuts at: 45° 90° 135° (Intermediate angles available as an option.) Cutting Capacity SC55 (Ø500 mm saw blade) Maximum profile height at 90°: approx. 155 mm Maximum profile height at 45° / 135°: approx. 155 mm Maximum profile width: approximately 160 mm Minimum workable profile width: approx. 25 mm Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg 2) CNC Machining Centre – Pertici FC1000, Year 2018 The Pertici FC1000 is a high-productivity CNC machining centre for PVC profile processing. It automatically loads, positions, machines and unloads profiles, ensuring fast and efficient production. Equipped with 7 machining spindles and an automatic screwdriving unit, it performs all machining operations in a single cycle. The machine is controlled by Pertici CNC software, compatible with the main production management systems, and features an automatic magazine for up to 10 bars with a maximum length of 6,100 mm, processing profiles from 35 to 130 mm wide. Main Features 7 machining spindles Integrated automatic screwdriving unit Automatic magazine for up to 10 bars Fully automatic loading and unloading Pertici CNC software Automatic profile handling and positioning system Heavy-duty industrial frame Soundproof safety enclosure Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg Maximum bar length: 6,100 mm Profile width: 35–130 mm Available for immediate delivery from October 2026.

Condition: used, Available quantity: 3 units Manufacturer: Cleco Model: 48ESE25D3 Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Hfodjzgf D Espfx Aiton Application area: Industrial series assembly Drive: electric Use: Controlled screw fastening Suitable for: Production and assembly lines Industrial design: yes

Condition: ready for operation (used), Stöger 9280 Screwdriving Automation SN: SES003744, used, in good condition, 100% operational, scope of delivery as per photos. Hfedsz Ac Ndjpfx Aitsn

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Hfsdedcmdlopfx Aiton Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: used, maximum load weight: 2,123 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 08/2022, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 350 mm, total width: 1,647 mm, total height: 748 mm, Year of construction: 2022, A37 GW26N0159988, Rear tipper by Unsinn, type UHK 2627-14-1500, tandem axle, gross vehicle weight 2,600 kg, platform trailer, overrun brake, 100 km/h, aluminium side panels, pumpless cordless screwdriver pump. Subject to errors and prior sale. Hfsdpfx Asyn Uc Usitsn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For sale: Schtec SMC3500 machining center. Like new, very little used, in excellent condition, complete with all accessories. Package offer: If purchased together with the WM740 welding line and the Pressta double-head screwdriver listed in our other advertisements, the total price is 180,000 EUR. For more information, please feel free to contact us! Hsdoyzihtopfx Aitofn

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Hedpfxoy E T Dto Aitjfn Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Feeding system, feed device Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Weight: 20.5 kg Good condition

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm Hedpefc Hfvjfx Aitefn -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz Hjdexw Rdlepfx Aitefn - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: new, maximum load weight: 1,100 kg, overall weight: 1,500 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,400 mm, loading space height: 300 mm, total length: 3,650 mm, total width: 1,540 mm, total height: 950 mm, Year of construction: 2026, Humbaur HUK 152314 rear-tipping trailer with Flex-E pump, enabling easier tipping with a cordless screwdriver. Description: Compact dimensions, high-quality materials – the HUK always performs well in everyday use. Hfodpfx Aijz Dzl Deton Its special quality feature: The trailer has a robust outer frame and an internally mounted deck plate. Where else will you find this in this class? Technical data: Trailer type: Single-axle Construction: Aluminum Rear-tipping trailer, 45° Weight: 400 kg Total weight: 1500 kg Payload: 1100 kg Internal length: 2,300 mm Overall length: 3,650 mm Internal width: 1,500 mm Overall width: 1,400 mm Internal height: 300 mm Overall height: 950 mm Loading height: 640 mm Tires: 13 inches Equipment: Chassis and tipping platform welded and hot-dip galvanized * V-groove outer frame with recessed tie-down eyes, tensile force 400 kg per tie-down ring * Galvanized deck floor (3 mm) * Drop-down side walls, 300 mm, all around * Drawbar locks * Conical corner posts * Automatic support wheel * Lighting protected in the underrun protection * 3-stage telescopic cylinder * Double-acting hand pump * 13-pole plug Other models, sizes, and versions are available or can be ordered and configured individually according to your wishes. Please contact us, we will be happy to advise you personally!

Condition: new, empty load weight: 560 kg, maximum load weight: 2,040 kg, overall weight: 2,600 kg, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600kg 276x150x30cm rear tipper with PUMPless" Rear tipper from the manufacturer Unsinn. Made in Germany! The WEB-HK2715-26-13 high-loader rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the foldable and removable aluminum side walls. The load is tipped back out using manual hydraulics. A welded subframe makes the tipping trailer very stable. Hedpfxoqv Ec Hs Aitefn The car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, and a very stable V-drawbar. Trailer accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, net and supports are also available for an additional charge.

Condition: new, empty load weight: 390 kg, maximum load weight: 910 kg, overall weight: 1,300 kg, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm rear tipper with PUMPless" Rear tipper from trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 single-axle high-loader is a rear tipper. Easy to load thanks to its foldable and removable aluminum side walls. The load can then be tipped manually using the hydraulic system. A welded base frame makes the tipping trailer very stable. Hedpfsq Rvcqex Aitofn This car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, a support wheel, lashing eyes, a welded, hot-dip galvanized steel frame, and a sturdy V-drawbar. Accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, load securing net and supports are also available for an additional charge.

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear Hjdpfew Tgp Dex Aitofn * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad Hodpfjvn U Adox Aitjfn clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg Hfedou Imk Rjpfx Aitjn 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Hfsdszlnxiepfx Aitjn Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Battery-powered screwdriver pump Features: - Aluminum side panels Hjdpfx Aijzy Agqjtsfn - 4 lashing eyes on the side edge - FLEXePUMP Net: €2,962.19 / Gross: €3,525.00 Article number: HUK115231421.01 Technical data: • Brand: Humbaur • Model: HUK 152314 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 230 x 140 x 30 cm • External dimensions (L x W x H): 365 x 154 x 95 cm • Loading height of the floor: 64 cm • Permissible total weight: 1,500 kg • Unladen weight: 400 kg • Payload: 1,100 kg • Chassis: High-bed trailer (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Removable steel corner posts • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side panel attachments or front wall extensions • Stable eccentric locking mechanisms • Solid steel floor - extremely robust • Reinforced continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members for high point loads • Additional longitudinal struts welded in • FLEXePUMP: Battery-powered screwdriver and hand pump combined, for tilting manually or at the push of a button with your own battery-powered screwdriver • 4 lashing brackets recessed inside the side edge (800 DaN/kg), TÜV certified! • Solid 3-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse driving automatic • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Hjdpfx Aijzy Duvetsfn Includes: Battery-powered screwdriver pump Features: - Aluminum side panels - 6x lashing eyes - FLEXePUMP Net price: €3,117.65 / Gross price: €3,710.00 Article number: HUK115271521.01 Technical data: • Brand: Humbaur • Model: HUK 152715 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 268 x 150 x 30 cm • External dimensions (LxWxH): 413 x 164 x 98 cm • Loading height of the floor: 67 cm • Permissible total weight: 1,500 kg • Unladen weight: 475 kg • Payload: 1,025 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Attachment option at all 4 corners for tarpaulin frames, lattice extensions, side panel extensions, or front wall extensions • Stable eccentric locking mechanisms • Solid steel floor - extremely robust • Reinforced, continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, allowing for high point loads • Additional longitudinal struts, welded continuously • FLEXePUMP: Combines battery-powered screwdriver and hand pump for manual or push-button tipping using your own battery-powered screwdriver • 6 recessed lashing eyes inside along the side edge (800 DaN/kg) TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO inertia brake and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Delivery possible nationwide - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Battery-powered screwdriver pump, all-steel floor Features: - 6 lashing eyes - All-steel floor - Folding side panels Net: €4,873.11 / Gross: €5,799.00 Article number: WEB226301821.01 Technical data: • Brand: Unsinn • Model: WEB DK 3017-26-13 • Vehicle type: Three-way tipper • Vehicle condition: New • First registration: without first registration • TÜV/HU (German technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 306 x 175 x 30 cm • External dimensions (LxWxH): 450 x 191 x 101 cm • Loading height of the floor: 73 cm • Permissible total weight: 2,600 kg • Unladen weight: 690 kg • Payload: 1,910 kg • Chassis: High-loader (wheels under the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid longitudinal frame for safe driving characteristics • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Insertion option at all 4 corners for tarpaulin frames, lattice attachments, side panel attachments or front wall extensions • Stable long lever latches • All-steel floor, 3mm hot-dip galvanized – extremely robust • Drawbar and frame hollow profile construction, welded and completely hot-dip galvanized • Many cross members, resulting in high point load capacity • All cross and longitudinal members rest on the ground • 6 folding lashing points, mounted recessed in the floor frame profile (600DaN/kg) • 6 lashing eyes under the loading area • U-profile at the rear for easier attachment of the ramps • Ramp shaft prepared • Solid 3-stage hydraulic cylinder • Hydraulic unit "pump-less" tipping with pump driven by a battery-powered screwdriver • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO over-run device and parking brake • 13-pin plug • Rear lights • Oversized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel for safely parking the loaded trailer, load capacity 500 kg Hjdpezy Dmlofx Aitofn • Premium jockey wheel with ratchet strap winder _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific wishes! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Battery-powered screwdriver pump Equipment: - 6 lashing eyes - Aluminum side panels - FLEXePUMP Net: €3,689.08 / Gross: €4,390.00 Article number: HUK227271521.01 Technical data: • Brand: Humbaur • Model: HUK 272715 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 268 x 150 x 30 cm • External dimensions (L x W x H): 416 x 164 x 98 cm • Loading height of the floor: 67 cm • Permissible total weight: 2,700 kg • Tare weight: 556 kg • Payload: 2,144 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted Hjdpfezy Dm Eox Aitsfn DESCRIPTION • Aluminum side panels, anodized, double-walled • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Option to attach tarpaulin frames, grid extensions, side panel extensions or front wall extensions at all 4 corners • Sturdy eccentric locking mechanism • Solid steel floor - extremely robust • Reinforced continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts welded in continuously • FLEXePUMP: combines battery-powered screwdriver and hand pump, for tipping manually or at the push of a button with your own battery-powered screwdriver • 6 lashing eyes, recessed inside the side frame (800DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse driving automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -