Tool trolleys

HBM HBM 196 r

Condition: refurbished (used), Used steel storage tank according to DIN 6616/2 (with test certificate), double-walled, for above-ground storage, with saddle supports, 1 dome, optical leak detection device, limit value sensor, and complete tank fittings consisting of: Bdedpfx Adjhvmitjrjd - 3" filling pipe with TW coupling - 1" sounding pipe with sounding rod - Euroflex 3 suction combination (max. 150 l/h) - 1 2" vent with vent cap. The tank is factory-equipped with the above-mentioned fittings and is internally cleaned. Capacity: 50,000 liters Diameter: 2,500 mm Length: approx. 10,800 mm Weight: approx. 8,800 kg The tank can be repainted in your desired RAL color and optionally equipped with a ladder including an operating platform. A cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will receive the exact freight costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers are possible, please contact us for this. Delivery time by arrangement! We also have these types of tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 300 h, power: 305 kW (414.68 HP), motor manufacturer: izuzu, gearing type: automatic, fuel type: diesel, maximum speed: 50 km/h, first registration: 01/2024, color: red, front tire size: 600/70r30, rear tire size: vf 710/70r42, machine/vehicle number: vkkmb770cpb325022, Equipment: additional headlights, air conditioning, cabin, lighting, trailer coupling, yield monitor with GPS, new tractor due to business shutdown photo on request Bsdpfowm Rdgex Adrjdd

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. Bdsdpopiarnefx Adrjd including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: new, plate thickness 0,8 mm throat 180 mm Bjdsht R Hmopfx Adrjdd weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg Bdsdpjv Rgzwefx Adred All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, greates pass round over bed 480 mm swing diameter over bed slide 300 mm turning length 1500 mm centre height 240 mm centre distance 1500 mm spindle bore 42 mm Bodpfx Adotqqx Ajrodd spindle turning speed range 14 - 1400 U/min total power requirement kW weight of the machine ca. 2,4 t dimensions of machine L x W x H 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis Bdodper Ezniofx Adrsd • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Bjdeun Sx Sepfx Adredd Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg Bdjdsvncubjpfx Adrjd

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL Bodjtqdxfopfx Adrsdd READY TO WORK