Used Pneumatic Screwdriver for sale (7,564)

Condition: like new (used), functionality: fully functional, Year of construction: 2008, operating hours: 1 h, machine/vehicle number: 6151922015, From our demonstration tool inventory, tested and fully functional: Used Chicago Pneumatic Redi Power RP2015 pneumatic pistol screwdriver with shut off clutch with trigger start Output: Hex 1/4" Torque: Dedpfxov Im Ncs Ailocn 2.0 to 5.5 Nm / 18 - 49 in.lb Idle speed: 1470 min-1 Length: 200 mm Weight: 1.0 kg Other tools for industrial production and maintenance on request.

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Dsdpfxev Imyue Ailscn Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Dcodjhxvu Eepfx Ailon Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Dsdpefx Hyfofx Ailscn Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Dsdpfx Asxf Up Usilecn Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Pneumatic screwdriver, DESOUTTER Pneumatic screwdriver, rod screwdriver for screwing technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Air pressure required: 6 bar Air consumption: 8.7 l/s Dodpsfgrrhofx Ailjcn Bit holder: M6 - Rotary switch for right and left rotation (rotary ring control) - Without screwdriver shut-off - Pneumatic control line Ø 4 mm - Pneumatic connection for screwdriver function min. Ø 10 mm - Aluminum bracket for handling device - Screw feeder Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,928 h, functionality: fully functional, machine/vehicle number: API124918, overall weight: 810 kg, power: 30 kW (40.79 HP), volume flow: 331.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Chicago Pneumatic CPVS 40 variable speed screw compressor – 30 kW – manufactured in 2015 For sale: a well-maintained Chicago Pneumatic CPVS 40 screw compressor. This compressor features variable speed control, allowing it to efficiently adapt to the compressed air demand. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Chicago Pneumatic CPVS 40 Year of manufacture: 2015 Motor power: 30 kW / 40 hp Capacity: 5.52 m³/min Maximum working pressure: 10 bar Voltage: 400 V / 50 Hz / 3 phases Motor speed: 3,555 rpm Weight: approx. 810 kg Operating hours: 29928/27409 Dcedjzkvb Njpfx Ailjn Variable speed control Serviced and ready for use This compressor is suitable for industrial applications where a reliable and energy-efficient compressed air supply is required. Optionally available with a new or used compressed air tank.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 6151740170, Exhibit: Chicago Pneumatic Air Chisel Hammer GV 5 Strokes per minute: 2400 Stroke: 52.5 mm Chisel shank: Hexagonal 19 mm Air consumption under load: 8.3 l/s Power: 12.2 Joules Weight: 5.1 kg Dsdpfx Aexwpiteilscn Overall length: 385 mm Air inlet: G 1/2 Specifically designed for heavy-duty industrial applications, the GV5 hammer combines powerful blows and an efficient impact frequency with a robust design. Thanks to its metal housing, large stroke volume, and high impact rate, the GV5 offers maximum performance and durability simultaneously. It is therefore ideal for roughening, chiseling, or cutting tasks.

Condition: good (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 199.2 m³/h, pressure (max.): 10 bar, PROD. - CHICAGO PNEUMATIC TYPE - CPVS25 S/N - ITJ109435 YEAR - 2017 CAPACITY (kW) - 18.5 Dsdpferb A Sfex Ailscn OUTPUT (m3/min) - at 7.5 - 3.32, at 8.5 - 3.14 , at at 10 - 2.92 CIS (bar) - 10 INVERTER - yes

Condition: like new (used), functionality: fully functional, Year of construction: 2023, From our demonstration tool inventory, tested and fully functional: New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) with 3 different sanding arms: Paper belt width: Dsdpfx Aijv U Ad Njlscn 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Included in the set: Belt sander CP5080-4200H18 1 x protective cover without handle 1 x handpiece 8 x sandpaper 1 x sanding arm 13 x 457 mm 1 x sanding arm 16 to 19 x 475 mm 1 x sanding arm 3 to 13 x 457 mm 1 x carrying case Advantages: The sanding head can be rotated 360° to adapt to the working position Easy changing of abrasives and Low contact Simple and robust design Technical specifications: - No-load speed: 20,000 - Power: 400 W - Paper tape width: see above under Scope of delivery - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance are available upon request.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes. Dcodszfzagjpfx Ailen

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications Dedpeh A Sfdofx Ailocn - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Year of construction: 2006, condition: used, functionality: fully functional, We present an Automatic drawer slide insertion line of 3 machines and robot (currently in production): BLA - B41, manufactured 2006/2007 (Sweden) BLA - B28, manufactured 2006 (Sweden) Screwdriver 3RL, manufactured 2018 (Lithuania) Robot Dcsdpfx Aiey T Nfiolen TECHNICAL SPECIFICATIONS Inserting of Drawer Slides Fitting machine BLA-B41 – pos. 1 Fitting machine in pass-through outfit, equipped with positioning stop, designed for automatic screwing of drawer slides. The fitting machine is designed for following sizes of material: Deep: 300–600 mm, servocontrolled adjustment Height: 400–1500 mm, servocontrolled adjustment Thickness: 16 mm Dimensions Machine length: 4100 mm Pass-through height: 900 mm Screwdriver equipment Screwdriver beams, 2 units, each equipped with 2 screwdrivers and corresponding screw feeders for Ø6.3x13 screws. A suiting screw is the type 84 FSX Magazine units 2 magazine units designed for left drawer slide 2 magazine units designed for right drawer slide · Each magazine contains approximately 40 drawer slides. · The length of the slides are 450 mm and the width 21.5 mm. Buffer conveyor TPB – pos. 2 Driven roller conveyor Total length: 2150 mm Other specifications are the same as for pos. 3 above. Buffer conveyor TPB – pos. 3 Driven roller conveyor Total length: 2450 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.78 m/sec. at 50 Hz (frequency controlled) Height: 900 mm Returning Conveyor System TPT-US – pos. 4 Sideway section with four belts Speed: 0.5 m/sec. at 50 Hz (frequency controlled) Driven roller conveyor Total length: 8900 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.50 m/sec. at 50 Hz Height: 900 mm Additional specifications Sound pressure level Lower than 70 dB(A) Connection facts electrical With reference to the electrical drawings Connection facts pneumatic 0.63 MPa (6.3 bar), ½”

Condition: good (used), Year of construction: 1999, machine/vehicle number: 68-410235, functionality: fully functional, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, SCHMIDT HydroPneumatic Press No. 68 including safety control system (KLEINIG Engineering) and machine base frame. For sale is a SCHMIDT HydroPneumatic Press No. 68, manufactured in 1999, which underwent a complete overhaul in 2019 and was last fully inspected in 07/2025 (inspection report available). The press is equipped with a KLEINIG press safety control system KPS-SPS with two-hand operation and emergency stop. The safety control system is EC type-approved. Technical data: Manufacturer: SCHMIDT Press type: HydroPneumatic Press No. 68 Dcjdpjz Duhxefx Ailen Year of manufacture: 1999 Overhaul: 2019 Machine No.: 68-410235 Serial No.: 1-014-99 Pressing force: 62 kN Stroke: 100/12 mm Safety distance: 150 mm Post-travel time: 1 sec. Post-travel distance: 15 mm Cylinder working side: 2967/1998 Cylinder translator: 3723/1999 Safety control system: KLEINIG KPS-SPS Serial No.: KE00633-011 Two-hand safety control system EC type-approved Control cabinet IP54 Display with touch panel Mains connection 85–264 V / 50/60 Hz Programmable digital inputs/outputs Programming port including USB cable and PLC software 2-channel pneumatic control block Two-hand buttons and emergency stop X1/X2 sockets for connection to SCHMIDT presses Including machine base frame KE 10 heavy_AL: Aluminum profile design Height-adjustable screwed feet Glare-free workstation lamp Compressed air storage tank 5-way 230 V socket strip Height-adjustable footrest Plastic worktop The press is offered complete with the described safety control system and machine base frame. Documents, operating instructions, etc. are all available. Inspection possible by arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Working torque: 65 to 190 ft.lbs Dcedjv Tbh Rspfx Ailjn Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Djdpsv Tbz Djfx Ailscn Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 6151710200, Demo tool with only 2 operating hours: Chicago Pneumatic CP4210AS push riveting machine with short alligator head Take advantage of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Dcodpfx Aiexwu Rcoljn Experience the benefits of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Year of manufacture: 2025 Technical specifications: Max. compression force (90 psi/6.2 bar): 13.3 kN Max. piston stroke: 15.9 mm Height: 92 mm Length: 233 mm Weight: 1.7 kg Jaw type: Alligator short Main material: Aluminum Max. rivet size aluminum (in): 1/8 Max. rivet size aluminum (mm): 3.2 Max. rivet size steel (in): 3/32 Max. rivet size steel (mm): 2.4 Starting system: Safety lever Air inlet thread size (in): 1/4 Air inlet thread size: NPT Max. working air pressure: 6.3 bar Min. hose diameter (5 m hose length): 0.38 in Min. hose diameter (5 m hose length): 9.5 mm Visit our store; we always have a wide selection of Pneumatic tools for industry and trade in stock.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request. Djdpsv Tbpzsfx Ailecn

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CP3T30-085AAV, Chicago Pneumatic Angle Turbine Grinder CP3T30-085AAV with autobalancer with spindle lock Turbine grinder - twice the power with less weight! Ideal tool for grinding and smoothing cast iron, steel, welds, non-ferrous metals of all kinds and stones, e.g. in steel and container construction, mechanical engineering, foundries and reinforced concrete construction Specifications: Dsdpfx Asxwn R Aoilscn Speed (idle): 8500 min-1 Max. power: 2.3 kW Air consumption under load: 1.92 m³/min Air consumption idle: 0.48 m³/min Weight: 2.1 kg Spindle Thread: M14 Air connection: IG 3/8" min. hose size at (5m hose length): 16 mm Required air quality: dried and oil-free

Condition: excellent (used), functionality: fully functional, USM POWERSERT impact wrench with automatic screw feeding for fastening hardware Dsdjz Iyn Sopfx Ailecn General overhaul

Condition: good (used), Year of construction: 2001, Air-powered airless pump on a pump cart The T2001 piston pumps are robustly designed, air-powered airless pumps developed for conveying, transferring, and spraying with multiple guns. The parts in contact with the material are made of stainless steel, hard metal, PTFE, or PE. An ATEX approval for use in potentially explosive areas completes the picture and makes the pumps versatile. Below, you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during conveying and spraying - Versatile due to stainless steel, hard metal, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy start-up thanks to a self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump carts - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction height (empty pump): 1.5 m water column Suction height (filled pump): 6.5 m water column Dodpsrt Uy Nsfx Ailjcn Material temperature: +10 to +85 °C Maximum stroke frequency (short-term): 50 strokes/min Maximum stroke frequency (continuous): 20 strokes/min Maximum material overpressure: 6 bar Gear ratio: 60:1 Volume per cycle: 270 ccm Permissible operating overpressure: max. 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4“ Material outlet: G3/8“ Material inlet: G1″ Weight: 45 kg Customs tariff number: 8424 8970 Year of manufacture: 2001 New price: 13,600 € including VAT You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: used, Cabbage corer on a stainless steel stand This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath. The machine is built entirely in stainless steel and stands on four legs with adjustable feet. The pneumatics sit in a box on the side. There is no type plate, so make and year are not known. Trying it with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. Djdpfez Ndkyjx Ailocn More photos and full specifications: / Type: Cabbage corer Drive: Pneumatic Controls: Pneumatic box with valves Construction: Stainless steel, on legs with adjustable feet

Condition: used, Year of construction: 2019, functionality: fully functional, pressing force: 5 t, stroke length: 60 mm, throat depth: 240 mm, ram plate width: 260 mm, ram plate length: 220 mm, overall weight: 233 kg, Equipment: CE marking, We are offering this used TOX PFHL 056.002.A.060 pneumatic knee-lever press, manufactured in 2019. Type: PFHL 056.002 Serial number: 439487.144 Description: Pneumatic press Maximum pressing force: 57.5 kN Total stroke: 60.0 mm Minimum air pressure: 3 bar Maximum air pressure: 6 bar Weight: 233.0 kg Year of manufacture: 2019 With stroke counter Including tool holders Mobile base frame optionally available (see last image) Dcjdpezy Uz Hofx Ailon Condition: see images, mechanically in perfect condition If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tilting mixing kettle Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Dcedpjz Nc S Nefx Ailon Construction: Stainless steel

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Djdpfx Aez Hv U Soilocn Overhang 130 mm Table 200 x 150 mm