Used Scrap for sale (445)

Year of construction: 2026, condition: like new (used), Scraper chain conveyor robust and wear-resistant design Fsdpfxjztzgco Akyogh optional: bar magnet separator please specify when requesting a quote: conveyor capacity m³/h dimensions

Condition: used, The SAMO slitting line, 2001 processes material up to 1,000 mm wide and is integrated with the PROMEC packaging line, 2019. (N19). Installed electrical power is 451 kW; Area 365 sq Meters Capabilities include: Coil Inside Diameters: 400 / 500 Coil Outside Diameter: 1,500 mm Strip width: Entry: 350–1,040 mm Exit: 20–1,020 mm Thickness: 0.3–3.0 mm Line Direction; Left to Right Siemens S7-400 PLC Installation includes: Coil Stand- 3 Coils Uncoiler with Snub Control Roll Motor: 26.5 Kw DC Edge Control, EMG Paper Winder Peeler Table Pinch Roll Crop Shear Vollmer Contact Thickness Gauge, Slitter Head Motor Drive: 72Kw, DC 400 Volt Edge guiding with automatic adjustment before slitting head Horizontal guide rolls before slitting head Shaft OD: 180mm Slitting Knives OD: 280mm Scrap winder Edge guiding at exit Rotating tooling turnstile on rails – 4 sided with 2 arms per side Pit with Pit Car Tension stand: Tension stand on linear rails Material table with horizontal and vertical position 4 horizontal guide rolls – pneumatically engaged 3 Roll Tension bridle roll system as material break Bridle roll motor: 138kW DC Crop shear Material table Re-coiler: Full hydraulic drum Overhead separator arm Motor: 190kW DC drive Ground level L-Shape coil car with overhead hold down arm 4 – arm coil turnstile with push-off arm Fodpfjz Iq U Nex Akyogh (5) Above ground Coil Cars All hydraulics and Controls PROMEC Packaging line: (See below) Underground coil car in front of Turnstile Scale PROMEC PACKAGING LINE, 2019 Layout Code: N19 Automatic packaging system serving the SAMO slitting line. Installed electrical power: 65 kW. Processes strip widths from 40–200 mm and thicknesses from 0.2–3.0 mm. Siemens S7-400 PLC First table: Tilting table with mandrel for coil handling Signode Strapping Machine Overhead Manipulator- Horizontal Coil Handling with expanding mandrels into ID or 3 arm OD clamping Packages eye to the sky or eye to wall. All hydraulics and Controls

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) Fjdpfxoyzr Nme Akyegh • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, Year of construction: 2011, functionality: unexamined, For sale: Scraper conveyor (Redler). The conveyor was used to transport pellets from two granulators to a bucket elevator. Capacity approx. 8 t/h. Fjdpfewz I Ulox Akyjgh Length: 13,300 mm, External width: 670 mm, External height: 750 mm, Bar width: 295 mm, Drive motor: 1.5 kW, Bar spacing: approx. 345 mm. The conveyor is dismantled and ready for transport. The machine can be inspected in Sępólno Krajeńskie, Kujawsko-Pomorskie Province, Poland.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 260 mm, control type: NC control, overall weight: 1,100 kg, Equipment: lighting, Band saw machine Manufacturer: Meba Type: Meba Profiline 260-AP Year of manufacture: 2004 Control system: Meba Serial number: XXXX Technical data: ----- - Cutting range 90° round: 260 mm - Cutting range 90° rectangular: 300 x 260 mm - Cutting speed: 15 - 150 m/min (AC drive) - Drive, saw band: 1.5 kW - Scrap length, automatic: 90 mm - Scrap length, manual: 10 mm - Cutting pressure: infinitely variable / electric - Saw frame guided twice via linear guides - Material feed via controlled feed clamp ..with hydraulic material full-stroke clamping - Saw band dimensions: 3,350 x 27 x 0.9 mm Fodpfez Hbgaex Akyjgh - Machine weight: approx. 1,100 kg Accessories: ----- - 5x saw band, new

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) Fgsdezgx H Hopfx Akyoh ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: repair required (used), functionality: not functional, Year of construction: 2007, operating hours: 134,409 h, machine/vehicle number: A0270A0124, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: Siemens, laser hours: 51,652 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, year of last overhaul: 2023, Equipment: documentation/manual, TRUMPF TRULASER 5060 CO₂ Laser Cutting Machine – 6000 W TRUMPF TRULASER 5060 – 6000W CO₂ Laser – Year 2007 – To be recommissioned Brand: TRUMPF Model: TRULASER 5060 (CO₂ Laser) Laser power: 6000 W CNC control: Siemens Serial number: A0270A0124 Year of manufacture: 2007 Technical specifications • Beam operating hours / cutting time: 134,409 h • Laser operating hours under power: 51,652 h • Maximum steel thickness: 25 mm • Dimensions: 10,300 x 3,820 x 2,550 mm • Weight: 16,500 kg Standard equipment: - TruFlow 6000 W resonator - HI-LAS high-pressure cutting - Cutting heads with 7.5’ and 10’ lenses - Quick-change cutting head device - Automatic sheet edge detection - Capacitive profile follower and APC process control - Positioning laser diode - Programmable cutting gas pressure - Programmable power cycle - Oil vaporization device - PCS (Process Control System) - Plasma line and LLS (laser power control) - Sprint Line - Contourline - Modem and remote diagnostics - Focus Line - Laser logbook - Automatic pallet changer - Work area lighting - Automatic nozzle cleaning - Conveyor for small parts and scrap - Multiple suction box - Suction device and dust collector - Automatic stop Fgedeztb Elopfx Akysh - TFT color screen - 3.5’ floppy disk drive - TruTops laser lite - RJ 45 network card - Safety device Including: air cutting, 3.5’ laser head with high speed, Load Master preparation, additional post-processor Machine condition The machine was in operation until 2023. The laser source and optical path maintenance have been regularly performed by TRUMPF. Technical inspections and preventive maintenance operations have also been carried out annually by the manufacturer. The machine is currently shut down and requires repairs before recommissioning, including pipe replacement. A detailed quote for the repairs and parts to be replaced has been prepared by TRUMPF and can be provided to serious buyers. The overall condition of the equipment requires, at a minimum, the acquisition of the spare parts mentioned in the manufacturer’s offer in order to restore satisfactory production conditions. Sales conditions • Immediate availability • Sold as is • Disassembly, loading, and transport are the responsibility of the buyer • Documentation and repair quote available upon request This machine represents an excellent opportunity for a company with the necessary technical skills to restore it or seeking a machine base for spare parts. For any further information or to arrange a visit, please contact us.

Condition: new, Year of construction: 2026, container length: 6,500 ft, We offer you high-quality skip loaders with mutually angled outer walls. Volume up to 40 cubic meters. Designed for the scrap and demolition industry, made of wear-resistant special structural steel HB450 HARDOX®. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Fjdpfx Akszg Iu Teysgh Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products!!!! --- FINANCING --- RENT-TO-OWN --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industry. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Cross member: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -Floor made of 5 mm HARDOX® HB450 -Side walls 3 mm HARDOX® HB450 -End profile made of 5 mm Strenx® 700 special edge profile -Rear and center spars made of 5 mm Strenx® 700 special edge profile -Rear door locking system Model Holland + safety lock -Lateral central locking -All-round tarpaulin and net hooks -Access ladder at the front, galvanized -Primed once inside, double-coated outside -Double-coated outside in a single color according to your desired RAL Optionally available on request: -Cross member UNP 220 = 22t design -Roll tarp -Steel cover with winch / hydraulics -Access ladder on the rear door -Additional spars / belly band -French door -Swing door -Grain slide

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B). Fgodjxn T Smjpfx Akyjh

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft pre-shredder / Rotary shear – Metal shredder – 264 kW – 1,930 hours Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: __2021__ Hours: 1,930 h Condition: Used Technical specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Blades: Bolted (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation Weight: approx. 27,500 kg Applications / materials Light scrap metal Steel sheets Drums / cans Fsdpfxjx I Dc Ee Akyogh Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Machine is functional Blades need to be replaced Maintenance records available Inspection and testing possible on site Terms of sale & price 🔧 Sold as is (work required) – Thread repair and blade holder surfacing, complete blade set replacement Availability: Immediate Price: €250,000 (excluding VAT)

Year of construction: 2022, condition: used, Dough mixing system, spiral mixer Diosna WH 240 E Premium Hygienic Design Available from mid-January 2026 Components: 2x Diosna WH 240 E spiral mixers with bottom discharge 1x Hopper with star roller dosing system for processing residual dough and conveyor system 1x Tilting lifter HK 300 1x Dough trough with transport / dough handling system 1x Control cabinet Fodpfx Aoz A Smiokyegh Incl. safety fencing Technical data: Year of manufacture: 2022 Dough capacity: 1,800 kg/h (≥ TA 154, ≤ TA 180) Maximum capacity in dough per batch: 240 kg Maximum capacity in flour per batch: 150 kg Number of batches: 7.50 batches/h Cycle time / auxiliary time: 8 / 1 min Maximum mixing time per mixer: 11 min Charging time into mixer: 4 min PLC control with touch panel and 19" display With frequency converter for dough trough and spiral (speeds adjustable) With temperature sensor Machine cladding glass bead blasted and reduced to a minimum Mixer designed for wet cleaning in the low-pressure range (IP65) System description The specified mixing system consists of two HygienicDesign spiral mixers, a dough trough with a transport device, an automatic scrap dough feeding system including weighing, and a tilting device with a discharging function. The ingredients can be added to the mixing bowl via filling nozzles on the mixer lid. The scrap dough is added via corresponding filling hoppers with pneumatic lids. Manual additions can also be added via these hoppers. The discharge of the dough into the dough trough is carried out via the electrically controlled bowl opening. The DIOSNA HygienicDesign spiral mixer is operated and controlled with a PLC control including a touch panel.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Fgedoykvdlspfx Akyeh Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: good (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: C 99 03 05, control type: NC control, degree of automation: manual, actuation type: electric, sheet thickness (max.): 6 mm, table height: 860 mm, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 6,150 kg, total length: 6,000 mm, total width: 4,800 mm, total height: 1,800 mm, number of support arms: 2, Equipment: CE marking, angle stop, centralized greasing system, documentation/manual, foot remote control, type plate available, For sale is an AMADA GS630 plate shear with additional equipment for efficient and gentle material and part transport. The system is equipped with a lifting table and a conveyor belt, enabling comfortable further transport of the cut components. An integrated scrap collection box ensures the separate collection and removal of the remaining scrap strips. The combination of a high-performance plate shear and automated part handling enables an efficient and material-friendly cutting process while reducing manual handling. Fgjdpfjzxqbasx Akyoh Equipment: AMADA GS630 plate shear Robust and reliable AMADA machine technology Lifting table for receiving and transferring the cut components Conveyor belt for automated part transport Scrap collection box for separate collection of scrap strips Gentle removal of finished components Reduced manual effort in part handling Suitable for efficient industrial sheet metal processing The combination of lifting table, conveyor belt, and scrap collection box is particularly practical, as cut components can be transported in a controlled manner, and scrap strips are collected separately. This optimizes the material flow and reduces the risk of damage to the manufactured components. Technical data: Manufacturer: AMADA Type: GS630 Machine type: Plate shear Year of manufacture: 1999 Max. sheet metal thickness: 6 mm Lifting table: available Conveyor belt: available Scrap collection box: available Condition: used, good Location: 54576 Hillesheim Inspection and test run possible by arrangement. A video of the machine during production can also be provided. Price and further technical information are available upon request.

Condition: refurbished (used), Year of construction: 2007, Description Technical Data Product number VS 90 Year of manufacture 2007 Chamber size: 1120x1020x380 mm Sealing bar length: 2 x 920 mm Capacity for packaging: 1-3 / min Weight: 1,450 kg Power supply: 400V 5N Vacuum packaging line The Cryovac VS 90 automatic conveyor vacuum packaging machine is designed for packaging fresh meat, meat products, and cheese for further industrial processing. The machine has a simple and robust design. Designed with ergonomic safety and hygiene requirements in mind, the machine is easy to operate, clean, and maintain. Specification: Manufacturer: Cryovac Model: VS 90 Type: Vacuum packaging machine Dimensions: 1940 x 1180 x 2700 (mm) Power supply: 400V 50Hz 3N Power: 17.3 kW Belt width: 700 mm Material: Stainless steel, acid-resistant Machines after a major overhaul. Fgsdpfx Akez Alw Rjyoh The pumps achieve a vacuum of 0.3 mBar, as confirmed by a recorded video. The line includes: Cryovac VS 90 chamber packaging machine Cryovac ST 77 steam immersion shrink tunnel Busch WV 1000 internal booster pump Busch Ra 0160-1 external oil pump Busch Ra 0160-2 external oil pump Container for film scraps

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Min. tool base size mm 700 x 500 Fsdpfx Aoz I Sbdskyegh Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Fodjz Exv Nspfx Akyegh Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: used, Year of construction: 2023, Used for the production of refrigerator door panels. Line Specifications: Manufacturer: MAS AUTOMAZIONI SRL Year of manufacture: 2023 Electrical supply: 400 V (±10%), 50 Hz Compressed air: 4.5-6 bar, dew point +5°C Cycle time: 10 seconds Changeover time: Automatic Line dimensions: 38.1 m (L) × 9.6 m (W) × 4.4 m (H) Sheet dimensions: Length: 400-2200 mm (±1 mm) Width: 650-900 mm (±1 mm) Thickness: 0.35-0.55 mm (±0.04 mm) The metal sheet forming line consists of: Sheet loading with measuring laser sensors. Punching and bending station with 2 sets of bending blades for different shapes. 2 available spaces for additional bending or forming stations. Fgsdpfx Akozummqsysh 2nd punching stations. Total number of pieces produced to date: 89,963. 2 scrap conveyors. Siemens S7 control system.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading Fgsdezy Hpispfx Akysh - Compact installation (double-wing swing doors) - Peeling system

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg Fgsdpszu Ryhofx Akyeh - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Fgodozn Rdmspfx Akysh Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Fjdpfx Aez N Sgqskyogh Year of manufacture 2015. Working width 46 cm, conveyor length approx. 250 cm. Discharge of trimmings from under the machine directly to the container. Material pressing roller, upper cover preventing spillage of the excavated material.

Condition: excellent (used), functionality: fully functional, overall weight: 250 kg, Year of construction: 1995, Kinshofer Grapple 605-200 / Loading Crane • Manufacturer: Kinshofer Grapple Technology GmbH • Type: 605-200 multi-purpose or shell grapple • Year of manufacture: 1995 • Hydraulic grapple for loading crane • Used for gripping and moving materials • Areas of application: scrap metal; logs; stones; demolition material; recycling material • Load capacity: 3000 kg • Weight: 250 kg • German machine • Immediately ready for use Fodpey Taqiofx Akyegh • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, Fodov Tb A Iepfx Akysgh 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. For further information, see the rating plate.

Condition: excellent (used), Year of construction: 2007, operating hours: 19,269 h, functionality: fully functional, BSTA 41, with 2x BBV 202/120+ scrap shear complete refurbished by Bruderer Swiss in 2007, Fgsdezlqi Djpfx Akyjh CE conversion possible Contact us!

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 131 720, total height: 4,120 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 2,600 mm, total length: 3,600 mm, drop-through hole in table: 1,200 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 160 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 650 mm, distance between stands: 1,600 mm, overall weight: 35,000 kg, control voltage: 24 V, input frequency: 50 Hz, ATTENTION: The machine is currently partially disassembled. The control panel and switch cabinet have been scrapped. Components can be inspected. Before delivery in 2026/2027, the machine will undergo a complete mechanical and electrical overhaul. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Fedpfezrxbuox Akyjgh Working height: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm The machine is currently not operational.