Used Scrap for sale (377)

Condition: used, mileage: 1,000 km, power: 375 kW (509.86 HP), first registration: 10/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #391 Mercedes-Benz AROCS 3545 L 8x4 B13 Kroll K 1.0-18.0 /36PESP, Suction Unit This Mercedes-Benz Arocs 3545 L 8x4 is equipped with a powerful KROLL suction/pressure tank superstructure of ADR class L4BH. With a tank capacity of 18,000 liters, VacuStar W1600, Speck P52/100-150, and hydraulic tank equipment for 18,000 L, this vehicle is ideal for demanding industrial, sewer, and emulsion suction applications. A robust suction system for professional operations. Superstructure * Manufacturer: KROLL * Tank Material: S355J2+N (St 52.3) * ADR Suction/Pressure Tank K 1.0–18.0 / 36PESP * Tank Volume: 18,000 L (air volume) * Sludge Volume: 15,000 L * Emulsion Chamber: 3,000 L Dkjdpfxex Egx Us Ac Nsh * Rinse Water Chamber: 1,000 L, non-pressurised * Discharge via robust ejection piston Vacuum System * CVS VacuStar W1600 – approx. 1,550 m³/h at 400 mbar * Approx. 30 m DN80 suction hose mounted on the tank lid, can be fully cleaned through High-Pressure System * Speck P52/100-150 – 100 L/min at 400 bar * Small hydraulic HD hose reel for 60 m DN13 * Equipped with approx. 60 m cleaning hose DN13 Special Features * ADR L4BH, incl. EX/II, EX/III & AT * Remote-controlled suction inlet for pre-chamber DN100 * Manhole DN500 (left side) * High-pressure gun * Soundproofing enclosure left and right in front of the pumps * Removable, swiveling halogen work lights * LED perimeter lighting * Radio remote control (including 2 batteries) * Tiltable scrap box * Reversing camera * Ladder with bracket and anchor points * Advertising boards left and right on the tank Technical Data * Gross vehicle weight: 32,000 kg * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Conclusion A high-performance Mercedes-Benz Arocs 3545 L 8x4 with large 18,000 L KROLL suction body, VacuStar W1600 and Speck P52 high-pressure system. Ideal for industrial, sewer, and emulsion suction projects requiring high durability and reliable technology. For further detailed information and pictures, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively on our general terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 13,000 km, power: 335 kW (455.47 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #374 Mercedes-Benz Actros 2546 L 6x2 / FFG elephant multi 11.003 MSR Water Recycling Unit FFG Umwelttechnik, Flensburg * Tank material: S355J2+N * Combined high-pressure jetting and sludge suction vehicle with water recovery * Permissible working overpressure: -1 / 0.5 bar * Approx. 11,000 liters tank capacity (air volume) * Approx. 8,200 liters max sludge volume * Approx. 6,600 liters max water volume * Discharge via ejector piston with three piston positions * Automated piston process with closed lid * Control: FFG elephant comfort pro (CAN-Bus) * FFG elephant connect * Automatic water recovery Chassis: Mercedes-Benz Actros 2546 L 6x2 * TipMatic * 455 HP / 335 kW * EURO 6 * Fuel volume: approx. 290l * Chassis color: Novagrau * Cab color: MB 9147 Arctic White * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system: Samson TruckMaster 2500 with approx. 2,200 m3/h * Water ring pump * Low-maintenance belt drive High-pressure system: URACA P3-45 G60 * Approx. 340 l/min at 205 bar * Low-maintenance belt drive Hose reel system: FFG multifunctional boom XL * Max. reach approx. 6,200 mm (telescopic) * Hydraulically swivels approx. 200° * Parallel routing of high-pressure and suction hose * High-pressure reel on tank top for 200 m DN 25 * Hose length measuring device DN 25 * Second high-pressure reel on boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on tank top Special features: * Hydraulic cable winch on the boom * Tiltable scrap box * Vise * Mounting brackets * Hand wash unit, warm * 7 work lights * 4 rotating beacons and LED flashers front and rear * Reversing camera * Hose storage and closed equipment box * Heated wardrobe * Compressed air connector for bubble filling * Various brackets for tools and equipment Dkedpfx Acewv Dg He Nsh Technical data GVW 26,000 KG * Unladen weight 18,975 KG * Length 8,990 mm * Height 3,650 mm * Width 2,550 mm Chassis – Special Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, right-side mirror with maneuvering position, 220 Ah battery, interactive multimedia cockpit, driver assistance system: high beam assistant and cornering light, spring suspension: front springs 9.0 t, 3-leaf, fire extinguisher, tinted windshield with stripe filter, vehicle without trailer brake, vehicle without trailer coupling, generator 150 A, gearbox 12-speed – type: G 330-12, transmission lock independent of gearbox, rear axle crown gear 300, 3-piece mudguards, 3-piece mudguards with splash guards, cooler / refrigerator, 2-cylinder air compressor, reinforced engine brake, steerable and liftable trailing axle 9 t, PTO independent and dependent on clutch MB 1,2, PTO MB 131-2c, parametrizable special module, frame overhang 1650 mm, rain sensor, acoustic reversing warning and warning flashers (external signal), additional key with remote control (2), circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, cabin seats: both armrests on passenger seat, cabin seats: passenger comfort suspension seat, cabin seats: driver comfort suspension seat, external sun visor, steel wheels 11.75x22.5 (front axle), 24V / 25A socket in passenger footwell, additional 24V socket in passenger footwell, steep-shoulder rims 11.75x22.5 (on trailing axle).

Year of construction: 2023, condition: new, Offer price for a short time only: € 13,500.00 net. Previous price: € 15,000.00 net. Copper cable granulator (cable shredder) can recycle waste copper wire into separated copper and plastic, the process capacity is 50-80kg/h, the dry physical shredding method does not produce pollution. Design and manufacture 99.99% excellent efficiency and reliability advanced technology: ● 10 years durability, High reliability and sturdiness.... ● Copper rate of 99.99% purity. ● Compact design with an affordable purchase price. ● Robust and powerful copper wire grinder with 5 rotating and 2 fixed blades that grinds cable scrap to 3 mm/4 mm/5 mm. ● Airflow gravity sorting system to guide the copper particles out of the insulation. ● Significant vibration separator to separate the copper granules from the insulation by weight. ● Self-cleaning dust collection system to reduce maintenance time and eliminate dust. ● Total 2 small vibrating screen tables at both outlets to get 99.99% excellent pure copper. Application Types of copper and aluminum wire scrap that the C06 wire granulator can process include: Household wires, Industrial wires, automotive wires, etc. Technical specifications Model V-C06 Power output 13kw range 0.1 ~ 30 mm weight 1200kg Mea Dkjdpfepm E T Tjx Ac Njh 1360*1360*1915mm Process capacity 50-80kg/h

Year of construction: 2025, condition: new, Cable Stripping Machine GRS 16 – Robust & Powerful For sale is a brand new, unused cable stripping machine, model GRS 16, ideal for recycling companies, cable processors, and scrap dealers. The machine is immediately ready for operation and impresses with its heavy-duty construction, easy operation, and high processing capacity. ✅ Advantages: - Industrial-grade durability – robust construction - High efficiency: up to 10,000 kg of cable per day - Suitable for large cable diameters (60–200 mm) - Quick and easy adjustment via handwheels (pressure & cutting position) - Safe operation with emergency stop switch and safety covers - 3-phase connection, ready for immediate use Technical Data: - Power: 7.5 kW - Capacity: 2,000 – 10,000 kg / day Dkjdjxmizzjpfx Ac Nsh - Processing range: 60 – 200 mm cable diameter - Blades: 2 units - Axles: 4 units - Dimensions: 1120 × 940 × 1600 mm - Weight: approx. 700 kg - Power supply: 3-phase (400 V) Condition: - New and unused - On pallet, immediately available for delivery or pickup Location: 86554 Pöttmes Price: €10,000.00 Perfect for anyone looking to recycle cables economically and efficiently.

Year of construction: 2023, condition: new, The cable granulator is widely used in copper scrap recycling to separate copper and plastic. The processing capacity is 100-150 kg/h. It can be crushed and separated without classification. It is the best choice for recycling copper scrap. Application V-S10 wire granulator machine is mainly used for processing copper and aluminum wires such as household wires, industrial wires, automobile wires and so on. Design and manufacture 99.99% excellent efficiency and reliability equipment, such as: Copper rice mill, air gravity sorting, electrostatic separation, pre-shredding, vibration screen, magnetic separation conveyor belt, self-cleaning dust separation. Dkedpfx Acjpm E U Rs Njh Technical Specifications Model V-S10 Power 17.8kw Range 0.1~30mm Weight 900kg Mea 1550*1500*2100mm Process capacity 100~150kg/h

Condition: refurbished (used), Electromagnetic belt separator | Magnetic separator | Electric overbelt magnetic separator | Electromagnetic overbelt magnetic separator Dkodpfjw Hnvgjx Ac Nsh reinforced series Factory overhauled (general overhaul - second-hand) with new bearings (spherical roller bearings) and new rubber conveyor belt Make: Wagner Magnete Type: 454-95/100-600 Conveyor belt width crosswise: 1200 mm Conveyor belt width lengthwise: 1000 mm Conveyor belt distance: 300 - 400 mm Power consumption magnet: approx. 5.0 kW Drive: SEW bevel gear motor Motor power: 3.0 kW, 400 V, 50 Hz Magnet (L x W x H): approx. 1240 x 950 x 600 mm Belt: EP 400/3 4+2 rubber conveyor belt with T-profile (40 mm), new Machine weight: approx. 3200 kg Machine color: RAL 6018 yellow-green Areas of application: Waste wood, waste paper and glass, mining, e-scrap, commercial waste, foundry, household waste, coal-fired power stations, plastics, building rubble, sawmills, scrap processing, bulky waste, steelworks, cement and gravel works

Condition: new, Shredder Shafts for Metal and Car Bodies fitted in Hammel 950, Arjes 950, Lindner U95, Olnova95 Djdpfx Acefg Adlj Nskh all types availlable WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. "MADE IN GERMANY" We manufacture exclusively in Germany using the finest materials. We impress with our high level of workmanship and quality. Delivery time by arrangement WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Condition: new, ARJES 950 Metallshafts ARJES 950 Starshafts ( wood, waste, tyres ) Arjes 950 TITAN Concret Shafts ( stronger Version ) WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. We manufacture exclusively in Germany using the finest materials, bearing the "MADE IN GERMANY" seal of quality. We impress with our long service life and easy repair. Delivery time by arrangement WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness. Dksdpjiyy I Esfx Ac Njh

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) Dkedpfxox Aq Axo Ac Noh - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser power: 6,000 W, The machine is powered on and can be inspected at any time. X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 100 mm Control system: ByVision Laser on-time: 17,372 hours Laser beam on-time: 3,572 hours 1. Base machine 1.1 ByStar Fiber 4020 Dynamic Edition F6000 1.2 Scope of delivery 1.3 Safety and guidelines 1.4 Complete documentation 1.5 Spot Control 1.6 Collision detection 1.7 Automatic nozzle centering 1.8 ByPos Fiber 1.9 Cut Control Fiber 1.10 Nozzle cleaning 1.11 Laser diode pointer 1.12 Scanning 1.13 Cutting bridge 1.14 Shuttle table 1.15 Laser source 1.16 Chiller 1.17 Tank heating 1.18 Tropicalization 1.19 Machine control system and operator interface Dedjxxic Aopfx Ac Nskh 1.20 Uninterruptible power supply (UPS) 1.21 Condition Messenger 1.22 Maintenance Messenger 1.23 Cutting plan editor 1.24 Restart manager 1.25 System manager 1.26 Cutting parameter assistant 1.27 OPC interface cutting 1.28 Handheld operator device 1.29 Electrical connection 1.30 Compressed air (machine, laser source, chiller, extraction system) 1.31 Material specification 1.32 Cutting gas 1.33 Ambient conditions 1.34 Structural requirements 2. Accessories for the machine 2.1 Detection Eye 2.2 Special position of the control cabinet 3. Additional options 3.1 Part marker (printer) 4. Automation 4.1 AWS16 4000x2000 h. 9800 mm, incl. 70 raw sheet cassettes and 20 return cassettes, 3-ton cassette, total number of storage locations 258 4.2 Handling device BYTRANS MODULAR 4020 Flex 5. Value Packages 5.1 Comfort The Comfort Value Package includes: - Automatic nozzle changer with 64 positions - Parts and cross conveyor in the cutting area - Scrap carriage under shuttle table (crosswise)

Condition: used, Year of construction: 1998, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550 Max. cutting length: 1550 mm side. Projection in column: 50 mm Sheet metal passage: 16 mm Cutting angle adjustable: 2°30 - 0.5° Empty strokes: 25 - 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil filling: 300 l Total connected load: 20.1 kW External dimensions: 2130 x 3260 x 2360 mm with - CNC control SIEMENS S 5 for numerical sheet metal bending - Holding up device mot. Scrap switch - Sheet metal removal with conveyor belt - Cutting gap and cutting angle with control programmable - Spare blades - Shear blade for 750 kg strength Dkedpovaatlefx Ac Njh - Separate hold-down actuation, e.g. cutting after cracking - Hold-down pressure can be set and read from the front - 2 rocker stops - Finger protection with recessed grip - Balls in the support table - Angle stop with Norius -Foot switch used in good condition Price on request. Delivery: from warehouse or location free loading truck. Payment: in the case of takeover purely net or by agreement. Technical specifications are non-binding. Errors excepted.

Condition: new, functionality: fully functional, total width: 2,400 mm, total length: 110,000 mm, total height: 2,850 mm, rotational speed (max.): 2,100 rpm, overall weight: 20,000 kg, power: 209.62 kW (285.00 HP), transport length: 10,500 mm, transport width: 240 mm, transport height: 395 mm, Equipment: rotational speed infinitely variable, WERT PHANTOM mobile shredder on crawler chassis for various applications - wood - waste Dodpfetty Hhsx Ac Nekh - tires - glass - paper - Building rubble - Light scrap Tooling according to customer requirements Equipment: Power: 205 KW - 285 HP Caterpillar C7.1. stage 5 Transmission: 2x 125,000 NM Optionally synchronous or asynchronous shaft rotation Hydraulics: Linde Belt width: 1000mm Discharge height: 3300 mm Magnet: Optional Spiral fan: standard Radio : standard Water spraying: standard Weight: 20 tons Dimensions L/W/H : 11x2,4x2,85m

Condition: excellent (used), Year of construction: 2009, Trumpf TruShear 5064 Guillotine Shear Manufacturer: Trumpf EHT Model: TruShear 5064 Year of manufacture: 2009 Condition: used, very good Control: ELGO 50 Cutting length: 4,050 mm Cutting capacity: 6 mm Drive power: 15 kW Max. strokes: 201/min Weight: 11,000 kg Customs tariff number: 84615090 Motorized backgauge Sheet support device Sheet return system Front support arms Front scrap container All documentation available Djdox Nfybspfx Ac Nskh Manuals included

Condition: ready for operation (used), functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL DETAILS Press force: 220 kN Max. sheet thickness: 6.4 mm Dksdpox I Hh Rjfx Ac Noh Travel path X-axis: 2,500 mm Travel path Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360°/sec Punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Workpiece weight: 150 kg Tool stations: 15 pcs Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-up cylinders Small parts sensor for programmable part chute Parts box for finished parts Chip conveyor with container Scratch-reduced processing Air-cushioned mounting Additional clamping bridge Prepared for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Alignment system for loading stack with spreader magnets Manually movable scrap grid system

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Dkedpfxsx Iwfmo Ac Noh Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message Dedew Ryt Dspfx Ac Nskh - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Year of construction: 2026, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Dksdpfxob Rz R Uj Ac Neh Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Dksdovug Dyspfx Ac Noh Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF550HD special waste baler is the ideal baler for compacting difficult materials such as scrap tyres, computer monitors CRT, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. Dkodpfxezd Rvj Ac Nsh By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 50 Ton Bale weight: up to 550 kg (material depending) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine size: 3570 H x 2115 W x 1200 D mm Machine weight: 1935 kg Transport height: 2500 mm Loading aperture: 1500 W x 780 H mm Cycle times: 50 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 5 rolls of strapping A quality product “Made in Europe” Suitable for compacting Scrap tyres Food cans and sheet metal containers Canisters and plastic containers / packaging Car bumpers Big bags Cardboard and plastic film / foils Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Dkjdpfx Aj Ry Huec Noh Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-MF450HD special waste baler is the ideal baler for compacting difficult materials such as PET bottles, food cans and metal containers, big bags, plastic canisters and plastic packaging, but also scrap tyres and car bumpers can be reduced to a minimum of volume with the baler. The special baling press impresses with its ease of use, safe operation and its spacious filling chamber, it is ideal for medium to large amounts of material. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 30 Ton Bale weight: up to 450 kg (material depending) Bale size: 1000 H (var.) x 1200 W x 800 D mm Machine size: 3343 H x 1781 W x 1196 D mm Machine weight: 1600 kg Transport height: 2300 mm Loading aperture: 1200 W x 680 H mm Cycle times: 40 seconds Motor: 5.5 kW 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Extra-long dual cylinders for even and early compaction of the material User-friendly lever control Bale kicker for easy eject the bales Extra retainer for reducing the material spring back Reel holder for 4 rolls of strapping A quality product “Made in Europe” Suitable for compacting PET bottles Food cans and sheet metal containers Canisters and plastic containers / packaging Scrap tyres and car bumpers Big bags Cardboard and plastic film / foils Dkjdpfx Asvug Eksc Nsh Other difficult valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Sliding top door Strapping rolls / bale wire Motor 11 kW 32 Amp Demo-Video shows BTS-MF550HD Special Waste Baler. Can Baler, Can Waste Baler, PET Baler, PET Compactor, Tyre Baler, Tire Baler, Scrap Tyre Baler, Scrap Tire Baler, Tyre Compactor, Tire Compactor, Can Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: ready for operation (used), Year of construction: 2010, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: N1A/002531, saw blade diameter: 600 mm, Due to discontinued production, we are selling an automatic front-cutting saw with PC and software for calculating pieces per bar and scrap. Dkjdox Rdb Hjpfx Ac Nsh

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 1,400 mm, pressing force: 300 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, driven by force produced through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety due to their rigid frame structures. Dkodpfx Aex N Sdmsc Noh The CRONOSSTECH CEHP-TB-300 – H Type Eccentric Press 300 Ton, is designed for high-volume production with a focus on stable operation, die protection, and operator safety. Featuring a monoblock frame, 8-point guided ram system, hydraulic overload protection, and an automatic lubrication infrastructure, it delivers reliable performance suited to continuous production environments. Key Advantages • Stable operation for large dies with 1400×1000 mm table size • Die/equipment protection with hydraulic overload safety • Controlled and user-friendly operation via PLC with touch screen • High operator safety with light curtain protection • Low maintenance needs thanks to automatic lubrication infrastructure Applications • Punching / cutting / die forming operations • Mass production with automatic feeding lines • Heavy-duty die and high-tonnage production processes Standard Features • Steel construction frame • Pneumatic clutch & brake • T-slotted supplementary plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload safety • Motorized ram adjustment mechanism • Light curtain protection • Gear group in closed oil reservoir • Double solenoid safety valve • CE compliance Optional Features • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Dies as per custom specifications Technical Specifications (CEHP-TB-300) • Capacity: 300 Ton • Table-to-ram distance: 500 mm • Housing width: 1430 mm • Ram adjustment: 120 mm • Press width: 3100 mm • Press depth: 2550 mm • Press height: 4700 mm • Table size: 1400×1000 mm • Ram face size: 1400×1000 mm • Stroke (fixed): 200 mm • Motor power: 45 kW • Weight: 35,000 kg Production / Supply Note This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 1,200 mm, pressing force: 250 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size - Die/equipment protection via hydraulic overload protection - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) Dedpfjx N Sc Asx Ac Nekh • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,000 mm, table length: 1,200 mm, pressing force: 200 t, warranty duration: 24 months, stroke length: 200 mm, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, operated by force generated via an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frames. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monobloc frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suited for continuous production environments. Key Advantages - Stable operation with large dies, thanks to the 1200×1000 mm table size - Die and equipment protection via hydraulic overload safety - Controlled and user-friendly operation via PLC and touch screen - Enhanced operator safety with a light curtain system - Low maintenance requirement with automatic lubrication system Areas of Application - Punching / cutting / die forming applications - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame • Pneumatic clutch and brake • T-slot additional mounting plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Ram counterbalance cylinder • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD display • Motor reverse • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety system • Enclosed oil reservoir with gear set • Dual coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover at table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-200) Capacity: 200 tons Table-to-ram distance: 500 mm Housing width: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimension: 1200×1000 mm Ram face size: 1200×1000 mm Fixed stroke: 200 mm Dkedpfxex N Sccs Ac Njh Motor power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.