Used Scrap for sale (377)

Condition: new, Year of construction: 2026, saw blade diameter: 350 mm, cutting range round steel at 90°: 90 mm, cutting range round steel at 45°: 80 mm, rotational speed (max.): 100 rpm, warranty duration: 12 months, saw blade speed: 100 rpm, cutting range square steel at 45°: 80 mm, cutting range square steel at 90°: 90 mm, Equipment: cabin, documentation/manual, rotational speed infinitely variable, Fully Automatic Magazine-Type Mitre Tube and Profile Cutting Saw Machine General Description The fully automatic magazine-type mitre tube and profile cutting saw machine is designed for precise and high-speed cutting of round tubes, square, and rectangular profiles at 90° and ±45° / ±60° angles in industrial production lines. With servo motor-controlled automatic angle rotation, PLC-controlled colour touch screen, and a patented anti-vibration cutting system, it delivers high cutting quality, long saw blade life, and repeatable precision. Key Features • Fully automatic magazine-type mitre tube and profile cutting saw machine • Servo motor-controlled automatic angle rotation up to ±60° • PLC-controlled colour touch screen • Servo motor and ball screw-driven material feeding system • Vertical cutting system with servo motor and ball screw movement, operating on a linear guide • Variable cutting speeds: - Slow at material entry - Fast during cutting - Slow at exit • Patented system that eliminates saw blade backlash: - Eliminates vibration and resonance - Prevents saw blade breakage - Extends blade life • Inverter-controlled saw speed between 20 – 80 rpm • Servo motor-controlled material feed and stop system • Ability to perform up to 10 different length cuts on the same material • ±0.2 mm length accuracy (may vary depending on saw blade runout) Cutting Capacity (Tube & Profile) Maximum Saw Blade Diameter: 350 mm Cutting Angles & Capacities Angle | Round Tube (max.) | Square Profile (max.) | Rectangular Profile (max.) -----|-----|-----|----- 90° | Ø 90 mm | 90 × 90 mm | 100 × 80 mm ±45° | Ø 80 mm | 80 × 80 mm | 100 × 40 mm ±60° | Ø 50 mm | 50 × 50 mm | 50 × 50 mm Minimum Final Scrap Length: 290 mm Technical Specifications • Main Voltage: 400 V • Control Voltage: 24 V • Installed Power: 8.7 kW • Current: 31.8 A • Saw Motor: 4 kW • Coolant Pump: 0.09 kW • Air Pressure: 6 kg/cm² (240 l/min) • Saw Speed: 20 – 80 rpm (Inverter controlled) • Angle Rotation: 90° / ±45° / ±60° Saw Blade Specifications • Saw Blade Diameter: 350 mm • Bore Diameter: 32 mm • Pin Holes: 2 × Ø11 Dodpfoyg H Rnjx Ac Njkh Coating Options: • TiN: For medium-hard steels • TiCN: For high rigidity steels • TiAlN: For stainless steels Machine Dimensions & Weight • Width: 7650 mm • Length: 2650 mm • Height: 2150 mm • Net Weight: 3320 kg • Gross Weight: 3350 kg

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 720 kg, total length: 320 mm, cutting length (max.): 300 mm, Alligator shears JMC 320 Fully overhauled, as new IMMEDIATELY available from stock IUT Beyeler AG, DE-06188 Landsberg. Financing and rental possible. We are looking for used alligator clippers! 12-month warranty The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type. One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous Dkjdpfjfxvklox Ac Neh metal separations. The 320 can also be used to cut ferrous metals. Every shear comes with 1 year guarantee, spare parts can be delivered within 24 hours to whole europe.

Condition: new, Year of construction: 2025, Alligator shear brand new AVAILABLE NOW, ex work IUT Beyeler AG, DE-06188 Landsberg Financing and rental possible. We are looking for used alligator shears! The McIntyre 407 Alligator shear is a non ferrous shear which is both affordable and efficient. It has a 407mm 16″ blade length and enough power and speed to handle a wide variety of cutting tasks. This versatile alligator shear was built originally for scrapyard use so is robust enough to withstand difficult working environments. It is now our most popular shear with thousands in daily use worldwide. The McIntyre 407 non ferrous scrap shear can handle: Automotive scrap Whole gear boxes Dksdpfx Ajhq Nlgsc Njh Cylinder heads and blocks Oversized gate valves And of course all the usual non ferrous metal cutting tasks. It can also handle ferrous metals if needed.

Condition: excellent (used), Year of construction: 2008, operating hours: 8,181 h, Equipment: ABS, additional headlights, adjustable boom, adjustable chassis, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, parking heater, standard shovel, For sale: fully operational and well-maintained LANZ FB 3000 material handler from 2008. The machine is in very good technical and visual condition, used in accordance with its intended purpose and regularly serviced. The sale includes a complete set of service documentation, operator’s manuals, parts catalog, and German documentation. ✅ Technical specifications: * Year of manufacture: 2008 Dkedpfeuui Ahex Ac Neh * Operating hours: only 8,181 hours * Machine weight: approx. 4,500 kg * Drive: 4x4 – all-wheel drive * Engine: Deutz 4-cylinder turbo diesel, 77 HP * Hydraulic stabilizer outriggers * Spacious, glazed cab with full visibility * Clamshell grab – ideal for handling wood, scrap, or waste * Fully operational machine – ready to work immediately

Condition: new, Year of construction: 2025, functionality: fully functional, Applications & Customer Benefits: The Arno® Screen SD Series (SD 1300–2100 / SD 1500–3400 / SD 2100–6000) are robust, semi-mobile screening drums designed for metal recycling and material separation. Ideal for processing metal chips, sheet metal, punching waste, and electronic scrap, they deliver precise three-fraction separation, high throughput, and flexible configuration for various screening tasks. Key Features: • Available in versions with Extension (larger drum area) or Bunker (uniform material feed) • Exclusive hexagonal drum design for superior precision and flow Dedpfx Acexvqhuo Nskh • Adjustable perforation sizes for customizable screening performance • Semi-mobile, foldable structure for flexible setup and transport • Optional Hardox drum plates for extended durability and wear resistance Tech Highlights: Sieve length 2100/3400/6000 mm · Screen Perforation 1-100/6-100/10-100 mm · Screen Perforation 1-100/6-100/10-100 mm · Power 5,5/7,5/7,5 kw · Installation surface 3,3 x 2,1 x 2,9/5,6 x 1,8/9,25 m

Condition: used, Year of construction: 2024, Warehouse Service  for Used Machines  Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers  Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers  Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics efficiency Our Expertise Our services cover everything from pre-storage to post-storage operations. Prior to storing your machines, we take care of professional dismantling, documentation, transportation, unloading, and installation. Once in storage, we offer cleaning, maintenance, machine adaptation, spare parts exchange, and machine presentations based on project requirements. When it is time for stored machines to leave our facilities, we provide fullservice logistics to ensure a seamless transition, from taking them out of storage to transport and re-installation at new production sites. The facility located in Bippen, Germany offers the different features to best serve your needs: Open space, closed roof (open and closed sidewalls) and heated premises.    Get in touch with us:  Dsdpfx Acju Ax Abj Nekh

Condition: used, Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, number of blades: 5, overall weight: 19,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, motor manufacturer: Cummins, motor model: Cummins B 6.7, Application area: waste wood and fresh wood, household and bulky waste, electronic scrap. Shafts with 7/7 discs, 5 cutters per disc. Breaker bar with comb. Robust hook lift frame. Axle with drawbar. Permanent overband magnet. Water spraying system. Magnet carrier hydraulically height-adjustable. Radio remote control. Dkjdjyghrtspfx Ac Noh

Condition: new, Standard equipment: - D-Touch 7 touch screen CNC control unit - CNC-controlled motorized cutting gap adjustment via upper knife (up to VS 4013) - CNC-controlled motorized cutting gap adjustment via lower knife (patented) (from VS 4016) - Plastic inserts for downholder (material protection) - variable cutting length adjustment via CNC - Cutting reel adjustment via CNC - Table plates with ball rollers - backgauge on ball screws 1000 mm - folding up finger guard to 1000 mm - 1 side stop L= 1500 mm, with scale, T-slot & tilt stop - 2 support arms L=1000 mm, with T-slot & tilt stop (up to VS 3020) - 3 support arms L=1000 mm, with T-slot & tilt stop (from VS 4006 to VS 4020) - 5 support arms L=1000 mm, with T-slot & tilt stop (from VS 6006 to VS 6016) - Cutting line illumination - Upper and lower knife can be rotated four times (4 sides can be used) Special accessories: - Light curtain for finger protection - throat 500 mm - Pneumatic sheet holding device "Durma I - Pneumatic sheet holding device without sheet return "Durma IV - Sheet metal holding device with conveyor belt and scrap container Dsdpfx Acon Ut Sts Nokh - CNC material feeding system - rear sheet metal chute - backgauge 1250 mm - Hydraulically liftable backgauge - X1, X2 axis control - adjustable angular stop 0-180 - additional supporting arm L= 2 m with vertical support - additional support arm L= 3 m with vertical support - extension arm L= 2 m with vertical support - extension arm L= 3 m with vertical support - side stop extension L= 2 m with vertical support - Side stop extension L= 3 m with vertical support - Side stop right L= 1500 mm, with scale, T-slot and vertical support - Ball in side stop or support arms - CNC front feed system for 3 meters - Laser cutting line - Spare knife (standard upper and lower knife) - Spare knife (upper and lower knife especially for stainless steel) - Oil cooler - Hydr. twist minimization for narrow sections - Central lubrication manual - Central lubrication motorized - Special painting - Control panel on the other side - Oil heating - Control panel air conditioning control system: - DURMA D-Touch 7 - 7 inch color touch screen - USB interface - Ethernet: RJ-45 10/100M - Stored database for automatic adjustment of cutting gap and cutting angle depending on material and sheet thickness - Creation of programs - Cut counter - User friendly - Fast data input Are you interested in exactly this machine model or do you have specific questions? Please feel free to send us a message via the contact field. We will answer you immediately!

Condition: excellent (used), Shafts (for shredding scrap metals) for HAMMEL VZ 850. Dksdpfxjwl D I Ns Ac Noh Also grill and combs are available.

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Complete plant, Centrifuge E 700 H/1, Drum dimensions 690/720/600 mm, Drum capacity 120 L, Speed 735 rpm, Wall thickness 12 mm, Material GS 45, Max. loading 300 kg, Charges per hour: 10, Heating power 8 kW, Operating voltage 380 V, Total connected load 35 A, Lifting device for loading, Vibratory chute for chips and parts, 3 separator drums with different hole patterns. Chip conveyor belt to scrap container. The unit can still be demonstrated under power. Ex production site: Dismantling and loading not included in the price. Assistance and forklift are available. The dismantled components weigh a maximum of 2 tons. Dkedpfx Aew Evy Rjc Neh

Condition: good (used), Year of construction: 2018, Burning and Drilling Line Dodpfx Acovzrczo Nekh Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic tool turret Tool stations: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing: 5 to 40 mm Minimum plate dimensions: 1,500 x 300 mm (750 x 400 mm with restrictions) Minimum finished part size: 80 x 80 mm Maximum plate weight: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point cross transfer conveyor Number of carriages: 2 clamps NC feed carriage, laterally positioned 4 clamping grippers (2+2) 3 short-stroke cross transfer conveyors Working height: 1,000 mm Outfeed side: Discharge roller conveyor with lowering unloading table, including chute to scrap container for unloading of small parts. Filter unit including piping High-performance for use with carbide tools. For drilling, thread cutting, marking, milling and plasma cutting of flat steel and plates. Software options for milling and scribing LANTEK license ä3226 Availability: Immediately!

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables Dkedjxgrnqepfx Ac Neh With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW Dodpfx Aoxgtkmec Nekh

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming Dkjdjxn Tywepfx Ac Nsh - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: new, Year of construction: 2025, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 4 mm, coil weight: 20,000 kg, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness brass (max.): 4 mm, cutting speed: 90 mm/min, product height (max.): 4 mm, working width: 1,600 mm, type of input current: three-phase, total width: 6,000 mm, total length: 28,000 mm, total height: 2,600 mm, feed roller diameter: 126 mm, operating speed: 60 mm/s, inner diameter: 508 mm, input voltage: 380 V, product width (max.): 1,600 mm, number of feed rollers: 2, number of straightening rollers: 17, power: 145 kW (197.14 HP), RAEDY IN STOCK ---> COIL SLITTING LINES Coil Slitting Line is a machine specially manufactured for slitting master coil in to baby coils. Coil Slitting Lines consist of the following equipment and units; Coil Car / Loading Trolley Decoiler / Uncoiler / Coil Unwinder Strip Transfer Unit Straightener / Leveler Strand Extensioner Leveler Dodpfoh Dy Iyox Ac Nskh Slitting Head witg Slitting Knives Spare Slitting Head and Knives for Quick Change Scrap Recoilers / Winders First Strip Transfer Unit Strip Tension Control Separator Units and Parts Coil Rewinder System Coil Extraction and Easy Handling System Exit Car Hydraulic and Pneumatic Systems Electronic Control Panels

Condition: excellent (used), Forklift tipping container, tipping container, tipping skip, forklift skip, waste tipping container, scrap tipping container -Condition: NEW -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism -Storage: stackable -Corrosion protection: Powder-coated Dkjdpfjb A Hupjx Ac Neh -Dimensions: 1750/750/H870 mm -Quantity: 6 pieces available -Price: per piece -Weight: 180 kg

Condition: refurbished (used), functionality: fully functional, We are selling an excavator magnet, electromagnet, and hydraulic magnet ZANETTI HM5-14AZ SAT With mounting plate for quick coupler and practical 2+3 teeth for "digging through" construction debris and recycling material. Dkedpsvtmmljfx Ac Noh The magnet is hydraulically driven, e.g., via the circuit for the trench cleaning bucket! The magnet contains an oil motor that drives a power generator, which in turn activates the electromagnet. You do NOT need a separate generator. The magnet is powered by the excavator's hydraulic system. You only need two hydraulic hoses to the excavator, forklift, or wheel loader. The magnet contains a hydraulic motor that drives the power generator inside the magnet. You turn the magnet on and off using the excavator's joystick. A very ingenious design! Excavator sizes from 5-14 tons. A 6-13 ton excavator with a hydraulic quick coupler (Likufix, OilQuick, Lehmatic, or similar) is ideal for quickly switching from bucket/grab to magnet. The purchase price pays for itself very quickly through the rapid sorting of reinforcement and other steel parts (it also lifts medium-sized steel beams, see photo) and the resulting scrap value! The magnet has seen very little use and is in very good, ready-to-use condition. The electronics have been improved (new electrolytic capacitors, more stable construction. See last photos). Sale excludes any warranty or guarantee. Sale to dealers or commercial customers only. The price is NET + 19% VAT. Pickup in 96231 Bad Staffelstein or delivery to you for an additional charge (we will be happy to calculate transport costs upon request).

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro Dkedpfx Acoipxyne Noh M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: used, SLITTING LINE GEORG 1500x1.5x25 Main technical data Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1850 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn 2 Slitting heads PLC: Siemens S7 1200 Cutting capacity: number of cuts with 350 MPa 24 cuts for thickness 0.25 mm 28 cuts for thickness 0.50 mm 21 cuts for thickness 0.75 mm 18 cuts for thickness 1.00 mm 15 cuts for thickness 1.25 mm 12 cuts for thickness 1.50 mm Scope of supply 1. Coil Carriage 2. Uncoiler 3. Guiding system with 2 measured edges 4. 203.2 diam. Pinch roll before shear 5. Double interlock table Dksdpsxl R A Rsfx Ac Njh 6. Slitting shear:Shaft diameter: 160 mm 7. 1 off line quick change slitting head available 8. Scrap press and conveyor 9. Intermediate coil table 10. Loop Pit and covering tables 11. Strips Braking Unit 12. Motorised recoiler with hold down separator arm 13. Unloading Coil Car 14. 4 arms turnstile 15. Electrical cabinets & Control panels 16. Existing tooling 17. Existing documentation Coil thickness: 0.24 – 1.5 mm Uncoiler coil weight: 25 Tn Coil width: 230 - 1500 mm Coil outer diameter: Max. 1800 mm Working speed: 200 m/min Slitting tolerance: +/- 0.125 mm Line direction: Right to left Recoiler coil weight: Max. 16 Tn Slitting heads: 2 PLC: Siemens S7 1200 For thickness 0.25 mm: 24 cuts with 350 MPa For thickness 0.50 mm: 28 cuts with 350 MPa For thickness 0.75 mm: 21 cuts with 350 MPa For thickness 1.00 mm: 18 cuts with 350 MPa For thickness 1.25 mm: 15 cuts with 350 MPa For thickness 1.50 mm: 12 cuts with 350 MPa

Condition: as good as new (ex-display), Hammer mill Manufacturer: NEUE HERBOLD Type HM 450 / 300 Drive: 18.5 kW - show room machine - Dedobxadnopfx Ac Nskh crushing of brittle plastics such as electronic scrap, wood scrap, and organic insulation material.

Year of construction: 1988, condition: used, Bombled Guillotine Shear – 3006 mm Manufacturer Bombled Industrie – France Type Motorized guillotine shear – CAFRA model Industrial Applications Sheet metal cutting in boiler making, metal workshops, industrial maintenance, fabrication lines, and metal forming operations. Main Technical Specifications: - Max cutting length: 3050 mm - Model: 3006 - Type: CAFRA - Commissioned: circa 1987 - Actuation: motorized (electromechanical or hydraulic depending on version) - Heavy-duty monobloc frame - Side-mounted control panel - Angled scrap conveyor for cut parts 🧩 Machine Usage The Bombled 3006 shear enables accurate and repeatable cutting of sheet metal up to 3 meters wide. Designed for intensive use, it fits perfectly in fabrication or sheet processing workshops. Dodjupkkpepfx Ac Njkh ⚙️ Features / Differentiators - Above-average cutting length (3050 mm) - Heavy frame ensures stable, vibration-free cutting - Proven French design meeting 1980s safety standards - Adaptable for various sheet thicknesses depending on configuration

Condition: used, Year of construction: 2012, control type: CNC control, laser type: fiber laser, laser source manufacturer: IPG, laser power: 3,000 W, sheet thickness steel (max.): 14 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness copper (max.): 5 mm, workpiece weight (max.): 750 kg, year of last overhaul: 2024, Equipment: cooling unit, documentation/manual, safety light barrier, For sale: Salvagnini 3kW Fiber Laser. Year of manufacture: 2012. The L3 is the first 2D laser cutting system designed and developed entirely to leverage all the advantages of fiber laser sources and linear drives, with features that make it the ideal solution for our customers’ requirements, such as: Dkodpfjvulggox Ac Neh - Ease of operation - High productivity - Lower operating costs - Reduced energy consumption Key features of the L3 laser cutting system include: - Simple architecture with a purpose-built gantry structure, combining rigidity, precise positioning, high dynamics, and easy accessibility to the work area; - Highly efficient IPG fiber laser source; - Efficient control console for extremely easy and versatile production management, even directly from the machine PC; - High modularity of loading, unloading, sorting, and storage devices, offering a broad range of solutions for specific needs: from basic automation to fully automatic, unattended operation. Automatic pallet changer system for the laser table. Each table is equipped with steel, replaceable grids. Maximum sheet size: 3048 mm x 1524 mm Z-axis travel: 100 mm Maximum sheet weight: 750 kg Working table height: 980 mm Material Cutting capacity Mild steel (S185JR, S235JR, RAEX 250 C LASER): 14 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301): 10 mm Aluminum (Al 99.5 EN AW 1050A): 8 mm Copper (Cu-ETP CW004A H040 EN1652): 5 mm Brass (Cu Zn CW508L H055 EN1652): 5 mm L3-30 L3 Laser System GF Steel grids CRS Scrap containers SiX Controller FLR20 3000W Fiber resonator with chiller unit ASF Fume extraction ACUT Compressed air cutting option ADB Automatic sheet loading system Office Software Office software included

Condition: new, gearing type: other, fuel type: gasoline, color: red, emission class: none, suspension: other, driver cabin: other, Equipment: crane, - 3x attachment from 2700 EUR plus VAT - Timber grapple for truck loader cranes complete incl. rotator, mounting plate etc. - Price EUR 2700 plus VAT - Immediately available from Bad Salzuflen, collection or shipment by forwarding agent possible - Opening width 77- 1300mm - 92 kg weight - max. 250 bar pressure - Dimensions A:1300 W:326 H1:625 H2:444 D: 77 mm - Subject to errors and prior sale - - Scrap grab / scrap spider for truck loading cranes complete incl. rotator, mounting plate etc. - Price EUR 3300 plus VAT - Immediately available from Bad Salzuflen, collection or shipment by forwarding agent possible - Opening width 1180 mm - 95 kg weight - max. 250 bar pressure - Dimensions A: 735 B:1060 C:1180 D:600 E:435mm - Subject to errors and prior sale - - Clamshell bucket for truck loading cranes up to approx. 1.6m/t and excavators up to approx. 5t. Purchase price incl. rotator mounting plate etc. - Price EUR 2900 plus VAT. - Immediately available from Bad Salzuflen, collection or shipment by forwarding agent possible - 125 liter capacity Dkodjt Idxqepfx Ac Noh - 120 kg weight - max. 200 bar pressure - Opening 1200mm - (B) Outer dimension open 1200mm - (C) Outer width 450mm - (A) Outside dimension closed 840mm - (D) Height open 523mm - (C) Height closed 660mm - Subject to errors and prior sale ... VAT shown, crane, new, consumption: 0.0/0.0/0.0 l/100 km (combined/in/out)

Condition: used, empty load weight: 10,800 kg, maximum load weight: 23,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,800 mm, loading space width: 2,400 mm, loading space height: 2,400 mm, loading space volume: 55 m³, suspension: air, gearing type: other, driver cabin: other, construction height: 1,400,000 mm, Equipment: ABS, * German semi-trailer Dodpfxeyc Ettj Ac Nokh * 1st owner * Condition: see photos * 55 m³ capacity * Hardox steel tipper body * Scrap & recycling tipper body * Roll tarp * Pneumatically locked portal doors * Dimensions: 9.80 m x 2.40 m x 2.40 m * SAF axles * Aluminum rims * Disc brakes * Air suspension with lifting/lowering function * Rear impact guard * Side underrun protection * LED work lights * Storage box * Gross vehicle weight: 35,000 kg * Unladen weight: 7,550 kg * Payload: 27,450 kg If a new TÜV inspection is required, we will be pleased to provide you an offer through one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV testing, WITHOUT new safety inspection (SP), and WITHOUT new accident prevention inspection (UVV). More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and examination of the goods to prevent any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are provided without guarantee. We accept no liability for errors or misstatements in this offer. The purchaser is responsible for independently verifying the condition and features of the goods/vehicles. Subject to change, prior sale, and error.

Condition: like new (used), functionality: fully functional, machine/vehicle number: ZCFCE358305679711, mileage: 200 km, first registration: 01/2025, fuel type: diesel, tire condition: 100 %, next inspection (TÜV): 01/2029, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, airbag, IVECO DAILY 35C12 V 4100 H3 Quad-Tor RG - EURO 6E National vehicle – VAT Exposed Vehicle length: 7.283 m Payload: 877 kg Leasing and customized financing options available Possible without down payment, with low instalments and a final balloon payment Trade-in and scrapping options available Price: €32,500.00 + 22% VAT = €39,650.00 VAT included MILEAGE CERTIFIED both in the contract and on the invoice. Despite our attention to provide all characteristics of the vehicle offered, some discrepancies in listed equipment and/or photographs may occur. Dedpfxoyctnls Ac Nskh We invite you to verify all details with one of our consultants, who is at your disposal for any additional information. JollyAuto Multi-Brand Dealership since 1984 - Passenger cars and commercial vehicles of all brands - Official Dealer DFSK – EMC – FOTON - New, pre-registered (km0), company cars, guaranteed used vehicles -APPRAISAL & TRADE-IN OF YOUR USED VEHICLE