Roll-off container for scrap / demolition

Container-Vertrieb-Chemnitz

Condition: new, container length: 6,500 ft, color: other, overall weight: 15,000 kg, We offer this custom-built half-pipe roll-off container with a hydraulic rear door in a spar-free design. 6.5 x 2.3 x 1.10 = 16.5 cbm Floor / wall made of 5/4mm Hardox ❌1 unit immediately available, color can be chosen❌ Ideal for demolition, civil engineering, or agricultural use! ⚠️ Unfortunately, many dealers advertise using the Hardox brand name but do not use genuine Hardox! We exclusively use “original” HARDOX® from the manufacturer SSAB! Godpfx Afszgdctj Tsuh Our containers have a sticker with a QR scan code. You can use the number to verify the “authenticity” of our products! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Color: as desired Delivery throughout Europe Dimensions: Approx. 16.5 cbm 6500 x 2300 x 1100 mm Possible lengths: 4.30 - 7m Possible heights: 900 1000 1100 1250 1500 Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5mm Hardox ® Optionally, in one piece Walls: 4mm Hardox ® Crossbar: INP 180 End profile: Rectangular tube made of S700 Weight approx. 2700kg Also available in S235 "normal steel" with a floor thickness of up to 8mm! --hydraulic rear door, flush-mounted / hydraulic connections on the left -2 telescopic cylinders, optimal working pressure 160- max 200 bar -Oil flow 6-10 liters / minute -raised front cab protection -rounded transition between floor and wall -floor spar spacing 750 mm -spar profile U 80 x 50 mm -all-round tarpaulin and net hooks -primed once on the inside, double-coated on the outside -double-coated, single-color on the outside in the desired RAL color Optionally available: -roll tarp -mechanical / electric Marcolin covering -hydraulic connections on the front wall -bolted fenders -crossbar UNP 220 -lifting bracket Ø 60mm -mesh grille in the front wall -grain / cereal slide

Condition: new, Year of construction: 2026, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 5,000 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, motor manufacturer: Yunnei EUR5 2,7L, fork length: 2,000 mm, overall weight: 4,400 kg, empty load weight: 4,400 kg, total height: 2,550 mm, total width: 1,800 mm, color: blue, Equipment: CE marking, air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, trailer coupling, I have a 3.5T rough terrain forklift for sale with a permanent 4x4 drive. Gujdpfxjxa Anhs Af Tsh EUR5 Yunnei DEF20CAF4 Dieselmotor 55kW 75KM Air-conditioned cab The truck is equipped with: - Triplex mast, 5m lift height - Fork side shift - Fork positioner - Carriage width: 1500mm - 1220mm long forks - Additional 2000mm long forks included - Pneumatic tires, size: 20.5/70/16 Truck dimensions: 370cm long, 180cm wide, 255cm high Truck weight: 4400kg option to purchase a 1800mm wide hydraulic bucket as a direct importer, we provide access to spare parts !!! Forklift price: 19800 EUR EXW PayPal payment available

Condition: new, overall weight: 15,000 kg, loading space volume: 37 m³, loading space width: 2,430 mm, loading space length: 6,500 mm, loading space height: 2,400 mm, We offer roll-off containers with a folding net cover in a spar-free design, available to order. ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Type Eco "H" with additional reinforcing band -> new model, reinforced design Thanks to the folding net system, cargo can be secured in 15 seconds. Dimensions: 6500 x 2400 x 2400mm = 36.5 cbm Other sizes available upon request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5mm Walls: 3mm Crossmember: INP 180 Transition from bottom to wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -Folding net system, semi-automatic -> integrated into the top edge -Mesh size 2 x 2mm -Lever mechanism and brackets galvanized -End profile made of special profile, bent -Door lock, Holland + model -Lateral central lock -All-around tarpaulin and net hooks -Ladder rungs on the front -Primed once on the inside, twice on the outside -Painted twice in a single color on the outside, according to the customer's RAL color Optionally available to order: -French flap -Swing flap -Grain slide What sets us apart from others? Gedpfxozu Dd Hj Af Tjuh -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Primed twice -Painted twice -All containers have nameplates and a valid UVV inspection certificate.

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm Gjdezhwccepfx Af Tjuh H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 7,500 kg, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, filling opening width: 1,450 mm, filling opening length: 2,500 mm, year of last overhaul: 2026, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 2500 mm Gujdpfx Afsrrhczs Tjh ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Machine weight: 9000 kg Machine in operation

Condition: new, maximum load weight: 18,000 kg, Made to order! Delivery throughout Europe! ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Silage container, suitable for Krampe, Fliegl, Pronar, Oehler, metaltech hooklift trailers. Spant-free design with hydraulic rear tailgate! Capacity: approx. 44 cubic meters! Clear internal dimensions next to the tunnel (L x W x H): 7500x2430x2300mm Internal floor length behind the tunnel: 7050mm Hook: 450mm, with tunnel!!! Unladen weight: 3810 kg Other dimensions are possible!! Material quality: SJ235 (ST37-2) Floor plate / wall plates: 5 / 3 mm -Subframe UNP 220 = 22,000 kg total weight -Hook: 60mm -Rollers reinforced -Perforated metal grating at the front wall, foldable -Perforated metal grating in the “hook tunnel”, welded -Double-acting hydraulic cylinders -Hydraulic connection at the rear, lower left Optional available: -Galvanized grain slide -Hydraulic connection on the hook Roll-off container according to DIN 30722 -H-coupling, -Reinforced and raised front -Galvanized and replaceable ladder according to UVV -Warning marking according to DIN 67520. Further options: -Roller shutter -Second ladder -Tie-down points in the floor and on the front wall -Hydraulic folding net for covering / load securing -Hydraulic Transcover system -Branding with your advertising What sets us apart from others? -Robot-welded component groups -All containers are bead-blasted -Double primed -Double coated -All containers have nameplates and a valid UVV inspection. Gusdpfxozhnqwe Af Tsh

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Guedozhpkljpfx Af Tjh Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 4 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW OPEN-TOP HOOKLIFT CONTAINER FOR BULKY WASTE IN HARDOX WITH REAR OPENING AND TWO FOLDING DOORS, 160 MM BEAMS WITH ANGLE REINFORCEMENT AND COMPLETE WITH NEW MARCHESI CRANE AND NEW ROZZI FOUR-TINE GRAPPLE WITH ROTATOR AND JOYSTICK CONTROLS REF: 24-N-34 TYPE: Bulky waste NEW: yes LID: no OPENING: rear with two folding doors Gsdpjvucpfjfx Af Touh DIMENSIONS TOTAL EXTERNAL LENGTH: 4.20 m EXTERNAL BODY WIDTH: 2.30 m INTERNAL/EXTERNAL SIDE HEIGHT: 2.00 m / 2.20 m CAPACITY: 18 m³ WEIGHT: 3,500 kg BASE THICKNESS: 4 mm SIDE WALL THICKNESS: 3 mm COLOUR: grey RAL 7000 CRANE DATA BRAND: MARCHESI M4T 01.60 SERIAL NO.: 0024-23 MAX LENGTH: 6.10 m (fully extended) EXTENSIONS: 1 MAX LIFTING CAPACITY: 640 kg at maximum outreach GRAPPLE DATA BRAND: ROZZI RP120 SERIAL NO.: 59860 WEIGHT: 130 kg CAPACITY: 120 L MAX LIFTING CAPACITY: 630 kg Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales department for an updated price list and terms. For more information: Loris: +39 348 477 3001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the industrial and commercial vehicle sales and purchase sector, specializing mainly in waste management. Specialists in trucks, trailers, and hooklift equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 containers, hooklift bins with or without cranes. E.&O.E. Given the large number of listings and technical details provided, Aurora invites clients to verify the information with our sales staff.

Condition: new, Available on request! Delivery throughout Europe! ---FINANCING---RENT-TO-OWN---LEASING--- -possible, please contact us!- Standard roll-off container 6.5 x 2.38 x 2.4 = 37 cbm Including folding net system! "Semi-automatic" operation The net can be opened completely and can also remain open while driving! Other sizes available on request. From 4-7.0m container internal length possible. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Floor: 5 mm Walls: 3 mm Cross member: INP 180 Transition between floor and wall is rounded. Mounting bracket Ø 50 mm, hook height 1,570 mm -End profile made of round tube -Door latch model Holland + -Lateral central latch -All-round tarpaulin and net hooks -Step on the front end, welded -Primed once on the inside, double coated on the outside -Double coated, single-color on the outside, in desired RAL color Optionally available on request: -Steel grade according to specification s235, s355, hardox -DIN 30722-2 -> 22,000 total weight -Spar spacing 50 cm -Cross spars -Mounting bracket Ø 60 mm -Roll cover -Steel cover with crank / hydraulics -Net system for covering / securing the load -Ladder on the rear door -Additional spars / belly band Gujdpjzhpizefx Af Tjh -French flap -Swing flap -Grain slide What sets us apart from others? -Robot-welded component groups -All weld seams are continuous on the spars -All containers are bead-blasted -Double primed -Double coated -All containers have nameplates and valid accident prevention regulations (UVV) certificates.

Condition: as good as new (ex-display), We offer you high-quality roll-off containers with mutually angled outer walls, custom-made to your specifications! Designed for the most demanding applications, manufactured from HB450 HARDOX®. Equipped with a folding net system for quick and secure load securing. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We exclusively use "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the "authenticity" of our products! --- FINANCING --- LEASE-TO-OWN --- LEASING --- -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industries. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available on request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Crossmember: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -semi-automatic folding net system -floor made of 5mm HARDOX® HB450 -side walls 3mm HARDOX® HB450 Guodpfx Afozpfx Is Toh -end profile made of 5mm Strenx® 700 special edge profile -rear crossmember made of 5mm Strenx® 700 special edge profile -center crossmember made of 3mm Strenx® 700 special edge profile -door latch, Holland model + safety latch -lateral central latch -all-around tarpaulin and net hooks -ladder on the front, galvanized -primed once on the inside, double-coated on the outside -double-coated, solid color on the outside, in your desired RAL color Optionally available on request: -crossmember INP 220 -roll cover -steel lid with winch / hydraulics -ladder on the rear door -additional crossmembers / belly band -French flap -swing flap -grain slide What sets us apart from others? - Robot-welded component groups - All welds are continuous at the crossmembers - All containers are bead-blasted - Double-primed - Double-coated - All containers have nameplates and valid UVV testing certificates. Visit us on our website!

Year of construction: 2021, condition: new, Aluminum inclined belt conveyor including subframe inclined section starting at 50mm (adjustable) discharge area 1500mm (adjustable) belt width 500mm (adjustable) We supply our belt conveyors in PVC, PU or rubber. PVC belt including cleats and wave edge Drive: 0.25kW motor (adjustable), speed 0.3m/sec Connection 220/240V, 50Hz, protection class IP54 Drive, etc., ready for connection, motor control optional 6 adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, particularly resistant to transverse forces Guodpfx Afjhh Dbae Teh Our core competence lies in providing customers with exactly what they need. We work together with our customers to develop customized, individual solutions and supply corresponding equipment from our own production. Contact us by phone to find a suitable solution for your application. Belt conveyor, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal detection (metal-free), neodymium, overband magnet, magnetic belt separator.

Condition: new, Year of construction: 2026, We offer this roll-off platform in various lengths, custom-made to your specifications. Color: as desired Delivery throughout Germany ---FINANCING---LEASE PURCHASE---LEASING--- -available, please contact us!- Details: Usable area: 6500 x 2470 mm Hook height: 157 cm Hook diameter: 50 mm Guedpfx Afjzgc Sae Tjh Floor: 5 mm non-slip sheet metal 2x material/tool box on the front wall Side UNP perforated strip 10 lashing eyes recessed on the right (5) and left (5) in the floor, 2.5 tons/eye 2 lashing eyes, 5.0 tons each, on the front wall Painting in desired color UVV approved and inspected What sets us apart from others? - Robot-welded component groups - All weld seams are continuous on the frames - All containers are bead-blasted - Double primed - Double coated - All containers have identification plates and valid UVV inspection.

Condition: new, Year of construction: 2026, We offer roll-off containers in various sizes, available on request. Color: RAL color of your choice Delivery throughout Europe Dimensions: 40 cubic meters 7000 x 2380 x 2400 mm Other dimensions are possible! 4.0 - 7.0 m x 2.38 x 2.4 m Reinforced design with lateral “belly bands”. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Regulation 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Crossmember: INP 180 Rounded transition between base and wall -End profile made of round tube -Door lock, Holland model + -Lateral central locking -All-round tarpaulin and net hooks -Ladder on the front -Primed once on the inside, double-coated on the outside -Double-coated in a single color on the outside, in the RAL color of your choice Optionally available: -Spar distance 50 cm Gsdpfx Afezg Ipqe Tjuh -Transverse spars -Mounting bracket, Ø 60 mm -Roll tarp -Steel cover with winch / hydraulics -Net system for covering / securing the load -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. We deliver and install throughout the EU. Gedpfx Ashmfctsf Tjuh