Laser cutting machine

Amada GS 630 + SE30

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 0304/5599, functionality: fully functional, controller manufacturer: Delem, controller model: DA-65, working width: 3,000 mm, bending force (max.): 105 t, control type: CNC control, degree of automation: automatic, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, european tool clamping system, Crowning: Reflex - ACSG1 Todpjxv Eafofx Acnsb Priključna moč: 11 kW Tools: Possible with agreement. NEW UPPER TOOL HOLDERS. Last service: 05/2025.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, controller manufacturer: Cybelec, controller model: Cybtouch 12, working width: 6,000 mm, bending force (max.): 300 t, control type: CNC control, number of axes: 4, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Used 6metre x 300ton Adira Cnc Press Brake - Hydraulic Pressbrake 300 Ton 6000mm bending Length Back gauge: X and Z Axis Upgraded touch screen control Cyblec CybTouch 12 Control System Year of Manufacture - 2005 Tjdpfxjwu Ua Uj Acnsb Good service history including rebuilt ram cylinders, rebuilt crowning and upgraded control system Euro tool clamping

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Tedpoydk Acjfx Acnsb Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm Todpfxjx S H Uxo Acnob - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 34 mm, total length: 230 mm, total width: 2,400 mm, saw band length: 4,700 mm, saw band width: 1 mm, Selling a MEBAMAT 330 12,500 operating hours Tjdswhix Eepfx Acnob The machine has cut 99% of plastic. You can find the machine's technical specifications at MEBA.

Condition: excellent (used), 4-axis hydraulic CNC press brake with HACO-Robosoft ATS 590 Graphic control (modernized in 2008) and CE conformity. Pressing force: 135 t Bending length: 4000 mm Dimensions L x W x H: approx. 4500 x 1600 x 2320 mm Weight: 10500 kg Accessories / Special features: • 4-axis CNC control HACO ATS 590 Graphic Y1 + Y2, X, R for bending depth, back gauge, and top/middle/bottom gauge fingers • The gauge fingers are adjusted manually, moving them together/apart • Graphical programming and display • CE conformity through 1 working speed • Hydraulic synchronized control • Manual table crowning by adjustment via hand crank under the die with SIKO counter • Split upper tooling, as new • Continuous universal die with 4 different V-openings up to max. V = 40 mm, as new • Split additional upper and lower tooling • Collecting rail • Tooling system "PROMECAM" • 2 pcs. support arms • Fast, precise and easy to adjust • Foot switch and emergency stop • Electrically secured safety doors (right, left, and rear) • 1 working speed, rapid return Todpfx Acsx Npiysnjb • CE conformity UVV valid until 04/2027 Delivery time: immediately from stock in Dortmund, free loading onto a truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: unexamined, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: CO₂ laser, laser source manufacturer: Trumpf TruFlow 3200, laser hours: 35,623 h, laser power: 3,200 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 200 m/min, feed rate Z-axis: 80 m/min, cutting speed: 140 mm/min, positioning speed: 140 m/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 3.2 kW (4.35 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: DC, type of cooling: water, overall weight: 12,000 kg, total length: 6,500 mm, total width: 7,600 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The machine was covered by a maintenance contract with Trumpf until 2023 and was serviced exclusively by Trumpf! Technical Data: - Laser power: Todpjxc E Rqjfx Acneb 3,200 watts (3.2 kW) CO2 laser source (TruFlow 3200) - Operating hours: NC control: 35,623 hours Resonator / Pump 1: 34,258 hours Beam On / Pump 2: 10,155 hours - Working area (X/Y/Z): 3000 mm x 1500 mm x 115 mm - Maximum sheet thickness: Mild steel: up to 20 mm Stainless steel: up to 12 mm Aluminium: up to 8 mm - Feed rates: X-axis: 3000 mm/min Y-axis: 1500 mm/min Z-axis: 115 mm/min - Positioning speed X/Y: 140 m/min - Smallest programmable increment: 0.001 mm CNC control: Siemens SINUMERIK 840D SL

Condition: good (used), Year of construction: 2000, The machine is being sold on behalf of a customer and can be inspected under power. Machine location: Czech Republic (Brno) Band saw automatic Behringer HBP 430A Year of manufacture: 2000 Saw band dimensions: 5800x54x1.3 mm Working area: round 430 mm / flat 430 x 430 mm Smallest material dimension: 15x10x15 mm Tsdpfxoylmlis Acnjb Shortest cut length: 8 mm Cutting speed: 17 – 110 m/min Saw drive motor power: 7.5 kW Connected load: 11 kW Dimensions (LxWxH): 410 x 230 x 210 cm Weight: approx. 3400 kg

Condition: like new (used), functionality: fully functional, power: 20 kW (27.19 HP), gearing type: hydrostat, fuel type: electric, color: blue, overall weight: 13,700 kg, empty load weight: 13,700 kg, operation weight: 13,700 kg, lifting power: 11,000 kg/m, lifting height: 10,000 mm, tire size: Voor 315×70-15 | Achter 250×70-15, tire condition: 90 %, axle configuration: 4x2, number of seats: 1, first registration: 02/2014, mast type: telescopic, Year of construction: 2014, operating hours: 286 h, Equipment: adjustable boom, crane, hydraulics, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 286 h Max. lifting capacity: 11,000 kg Total weight: 13,700 kg Power: 2 × 10 kW (80V electric motors) Drive type: Electric (battery 80V – 830Ah) Transmission: Front axle via gear reducer Steering system: Rear-wheel steering, hydraulic with load-sensing system Boom: Hydraulic telescopic boom (2 sections) Max. boom angle up: +60° Max. boom angle down: −10° Drive system: Electric with electronic speed control (MOSFET type) Tyres: Front: 4 × 315×70-15 | Rear: 2 × 250×70-15 (non-marking) Brakes: Hydraulic service brake, automatic parking brake Hydraulic system: Gear pump, 22 MPa maximum pressure CE certification: Yes (2006/42/CE – 2004/108/CE) Country of origin: Italy === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and use Fully electric drive – zero emissions Hydraulic telescopic boom with two extensions Non-marking tyres, suitable for indoor use Includes hydraulic winch, enclosed cab, and working lights === CONDITION === Excellent condition – only 286 working hours. Crane fully tested and ready for immediate use. Todpsxn Sm Asfx Acnob Available from stock. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price €89.999 (EXW / excl. VAT). The JMG MC 110 is a powerful electric industrial crane with a lifting capacity of 11 tons and a high-strength telescopic boom. Thanks to its electric drive, compact size, and non-marking tyres, this machine is ideal for use in production halls, warehouses, and maintenance environments. The MC 110 combines precision, safety, and zero emissions — a reliable solution for indoor lifting operations. === DELIVERY === Crane loading available on request for smooth handling during shipment. Flexible delivery options tailored to your destination and logistics preferences. All shipments are professionally handled by the logistics team of Collé Rental & Sales.

Condition: excellent (used), Year of construction: 2011, pressing force: 50 t, working range: 1,600 mm, 1 Used Very Clean Bystronic 1.5metre x 50ton cnc pressbrake for sale - hydraulic down stroke Description Year 2011 Pressure 50 ton Bed length: 1.6metre / 1600mm stroke 150 mm Cnc control: CYBELEC DNC 880S Tedevq N Hcjpfx Acneb 4 axis in total Quick release tool clamps Total power requirement 5,5 kW Weight of the machine 4800 kg