Edge sanding machine

ENORM / Kündig LBK 160

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pedpeidqphsfx Apderc Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Psdpfx Apecr T N Djdjrc Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)

Condition: new, Year of construction: 2025, operating hours: 8 h, functionality: fully functional, conveyor belt width: 900 mm, conveyor belt length: 18,320 mm, discharge height: 8,320 mm, motor manufacturer: Caterpillar, Belt length / width: 18,320 / 900 mm Cat C1.7 engine: output 36 kW at 2,800 rpm Conveying capacity: approx. 400 t/h Psdpfx Asw Hccnepdorc Discharge height: 8,320 mm at 22.5° incline Belt: hydraulically retractable and extendable Height adjustment: hydraulic Remote control: wired remote Crawler undercarriage length: 1,800 mm with 400 mm track plate

Year of construction: 2017, condition: as good as new (ex-display), Technical data: - Maximum dimensions (W x H) of finished part: 180 x 105 mm - Minimum working width: 23 mm Prodpoii Rxgefx Apdec - Minimum working height: 6 mm - Minimum length of individual workpieces: 300 mm - Feed rate: 6 - 12 m/min - Spindle speed: 6,000 rpm - Spindle diameter: 35 mm - Usable length of horizontal spindle: 190 mm - Usable length of vertical spindle: 120 mm - Adjustment range for feed table and infeed guide: 10 mm - Tool diameter of horizontal spindle: 100 mm - Minimum/maximum tool diameter of vertical spindle: 100/124 mm - Profiling capability of vertical spindle: 12 mm - Adjustment range for the tool heads: +/- 1 mm - Motor power of horizontal spindle: 7.5 kW - Motor power of vertical spindle: 7.5 kW - Motor power of feed: 0.75 / 1.1 kW - Connection voltage: 400 V - Phase(s): 3 - Mains frequency: 50 Hz - Length of material feed table: 2300 mm - Diameter of feed rollers - Diameter of extraction hoods: 1 x 150 mm, 2 x 120 mm

Condition: like new (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: A 2176121, Becker vacuum pump, like new – never used. Pedpfx Apezak Drodjrc

Year of construction: 1988, condition: used, • Maximum working length (mm): 3100 Prodpfx Apjkx Hpajdec • Maximum profile height (mm): 200

Condition: used, Year of construction: 1988, Panel saw Manufacturer: Rapid Model: PK 100 Year of manufacture: 1988 Note: The technical data and descriptions are copies of the original order confirmation from that time. The information is provided for informational purposes only and is not binding. Predpjzuynbefx Apdec

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connection value: 380V, 1.85kW, 4.8A Length of pressure bar: 3100 mm Pneumatic material clamping with manual lever valve Chassis Stop guide, 520 mm long Psdpfsh U Dbrjx Apdsrc 6x support brackets

Condition: used, total length: 1,700 mm, total width: 1,200 mm, total height: 1,700 mm, overall weight: 600 kg, grinding belt length: 3,000 mm, grinding belt width: 200 mm, power: 4 kW (5.44 HP), No. 04535 Two-sided edge sanding machine HÖFER BSM V pn / BSM 5 pn Used Double-sided edge sanding machine Drive motor 4 kW Oscillation motor 0.75 kW Belt speed 22 m/s Pneumatic belt tensioning Pneumatic height adjustment Belt dimensions 3000 x 200 mm Front sanding table 900 x 400 mm, pneumatically tiltable up to 45° Rear sanding table 900 x 400 mm, with veneer edge sanding device Transport dimensions approx. 1700 x 1200 x 1700 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse Podpfezg Itvox Apdsrc

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Prsdpfx Apevvi Nnjdsc Storage location: Supplier