Used Sanding for sale (1,905)

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units Csdpszuzctjfx Alberg - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 Crodpfx Aszuzb Aslbsg - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator Csdpfx Alozuzbcsberg - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: excellent (used), Year of construction: 1996, grinding width: 1,350 mm, power: 42 kW (57.10 HP), COSTA 71 CTT 1350 wide belt sanding machine, manufactured in 1996. Configuration: 1 hard rubber sanding roller. 1 electronic segmented sanding pad. Air blow-off system. Working width: 1,350 mm. Pneumatic (compressed air) cleaning system for all units. Vacuum worktable with integrated fan. Construction: Cedpfx Aoznvp Islberg Designed for use in a production line with a fixed working height; the sanding units move while the workpiece remains at a constant level. 2 motors, total power: 42 kW.

Condition: used, Edge sanding machine Holzmann KOS2510, good condition, standard equipment, 2510 mm belt length, 150 kg Price changes reserved, errors, printing and typographical mistakes excepted. Crsdpfxewzzf Rj Albsg

Condition: used, functionality: unexamined, Complete Sand Wash Plant (Trio / Siltbuster) Complete sand wash plant to include: Lamela Siltbusters Trio log washer Crjdpfjy Drtkex Albsg Trio sand washer Trio shaker 700kva generator All assoicated pumps, conveyors, tanks, power packs, framework. Note - partially decommissioned for potential relocation.

Condition: used, Year of construction: 1996, Technical data: - Manufacturer: Venjakob - Type: VBS 1300 Cedpfxeyyyhuo Alberg - Working width: 1.300mm - Year of construction: 1996 - Operating side: left - Electric height adjustment of the sanding rollers - Constant table height, working height 920+-20mm - Manufacturer of brush sanding heads: Flex Trimm - Number of brush sanding heads: 2 pieces - Diameter of the sanding heads: 280/390mm - Sanding centre length 55mm - Roller1, grit 240, roller2, grit 280 - Speed of the brush sanding heads: 100-1000 rpm - Angled brushes - With brush oscillation - With vacuum belt - Feed speed: 1.5 - 7.5m/min. - Motor power 4KW - Machinelength: 3.500mm - Very sturdily built machine - Colour: light grey RAL 7035 - Total connected load 16KW - weight: 2740 kg

Condition: used, Year of construction: 1991, - Manufacturer: Fladder - Model: Gyro 300 Vacuum - Working width: 1300 mm - Year of manufacture: 1991, good condition - Flex Trim sanding heads - Quick-change sanding media - Sanding media grit: K240 - Sanding media length: 45 mm with support brushes - Abrasive slits: 20 and 5 mm - Number of brush heads: 6 Credpfozia Nnsx Albsg - Rotating and oscillating sanding unit - Motor power: 5 kW - New frequency inverter for the conveyor belt - With vacuum conveyor belt - Feed rate: continuously adjustable from 2 to 8 m/min - Length: 2070 mm - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Location: In stock, D 32825 Blomberg - Volts, Hz: 400 / 50 - Can be tested in Blomberg

Condition: used, Year of construction: 2014, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm Csdpfx Alsxrb Rfoborg (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 1998, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 - Max. brush width: 1,300 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm - Feed rate 3-15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz Csdpfx Ajzubpajlbsrg - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Condition: used, Year of construction: 2001, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled Csdpsxtakmofx Alborg - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - El. Power 15KW - Fuse: 63A - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm - Weight with control cabinet: 2220 kg - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top Cedpfx Alozv Eaxebsrg 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: used, Year of construction: 1991, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 290-02-1819, total length: 2,670 mm, total width: 1,500 mm, total height: 1,200 mm, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 380 V, space requirement width: 1,800 mm, space requirement height: 2,000 mm, space requirement length: 5,000 mm, Edge sander, capable of sanding profiled strips on the first unit; the second unit is for flat sanding, and the third unit has a brush. Cedpozvy A Usfx Albjrg

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Cjdpfxex A Tayo Alberg Position 2: Top Sanders VIET-S3 - VALERIA

Condition: used, machine/vehicle number: 008401, Position 1: Bottom Sanders DMC-UNISAND K-I Csdpsywafnjfx Albsrg Position 2: Top Sanders DMC-UNISAND K-I

Condition: excellent (used), 4 kW motor Roller feed system Sanding belt length: 100 cm Codpfx Alozu Ng Tjbjrg Working height: 14 cm Table with adjustable angle and height

Year of construction: 1991, condition: used, weight 240 kg max 50 mm ja Credpsztfvbefx Albsg serial number 2035

Condition: reconditioned (used), Year of construction: 2006, year of last overhaul: 2026, ⚙️ STUDER S30-1 CE – High-precision cylindrical grinding machine | Complete retrofit We offer a STUDER S30-1 CE for high-precision external and internal cylindrical grinding operations. The machine has undergone a complete retrofit by MIRA Retrofit, including the inspection and refurbishment of its main components, as well as a careful adjustment and fine-tuning process. The result is a machine that is ready for operation, with a high level of precision, reliability, and stability, and performance comparable to that of a new machine. Key specifications: 🔹 Distance between centers: 650 mm 🔹 Height between centers: 175 mm 🔹 Grinding: external and internal 🔹 Condition: complete retrofit – ready for operation 🔧 Inspection and fine-tuning All components have been carefully inspected and adjusted to ensure high geometric accuracy and reliable, stable operation. 📸 Photographs of our finished machine. 🚚 Available for immediate delivery. For more information, technical documentation, pricing, or any questions about the machine, please do not hesitate to contact us. MIRA Retrofit SA Crjdpfszuzyljx Albsg

Condition: used, JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: - Table size: 2,800 x 950 Crodpfxezryx Uo Albsg - Motor: 5.5 kW - Belt width: 150 mm

Condition: used, Jet EHVS-80 cs lightweight edge sander for the precise sanding of straight and curved wooden edges. Its lightweight construction and powerful motor ensure a uniform finish with high material removal rates. Ideal for small joinery workshops, furniture making and interior fit-outs. Technical data: - Sanding belt length: 2260 mm - Sanding belt width: 150 mm - Table: Swivelling Crsdpfx Aljzryxhobjg - Motor power: 1.5 kW - Extraction connection: 100 mm

Condition: used, Technical data: - Conveyor belt width: 150 mm - Motor: 3 kW Crsdpfx Alozryw Rsbeg - Weight: 490 kg

Condition: new, The Holzprofi sanding belts are compatible with many different machines from all manufacturers! The Holzprofi Diamond Flex wide belt is the ideal solution for high-quality sanding applications. Specifically developed for use in wide belt machines, this sanding belt offers optimal performance and durability. With its resin-bonded, semi-open grit and antistatic coating, it ensures efficient sanding and minimizes dust formation. The extra-strong backing material guarantees a long service life and is ideally suited for processing all types of wood as well as various metals. Advantages: - Efficient sanding performance and long service life - Reduced dust thanks to the antistatic coating - Versatile for use with wood and metal - Robust backing material for high stress High quality – Made in Austria! The following lengths are available: DFN 1030x1900 DFN 1120x1900 DFN 410x1900 (only K60, K80, K100) DFN 457x1003 DFN 650x1900 DFN 650x1600 DFN 650x2200 DFN 930x1900 (only K60, K80, K100, K120) DFN 950x1900 Grit sizes: K60 Csdpfx Aszrlq Aolbsrg K80 K100 K120 K150 All other sizes are also possible! Prices from €18.00 Prices depend on length and design If you have any questions about the correct length for your machine, please contact us, and we will be happy to help. Tel.: 00 43 7613 5600

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Cjdpfx Aloxd Avtebsrg

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Codpjtk Rwtefx Albjrg

Year of construction: 2004, condition: ready for operation (used), A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible. Codpfx Aljt Amc Uobjrg