Used Sanding for sale (1,869)

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Dkjdpfxod Tb U Se Aiwol

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Weight 230 kg Total power requirement 3,5 kw Dkjdpfxsvz Hnrs Aiwol

Condition: used, Year of construction: 2017, working width max. 240 mm Dkedpfxoxwtwuo Aiwjl Sanding height max. 140 mm weight ca. 2200 kg

Condition: used, Number of sanding units 4 st. Dedpfx Aioxr N I Eowekl sanding width 1.300 mm Sanding height max. ca. 140 mm

Condition: used, sanding belt measurements 2.260 x 150 mm Motor output 1,5 kW Djdpfxswffpbs Aiwekl table: schwenkbar Dust suction hood 100 mm

Condition: used, sanding belt measurements 300 x 1010 mm engine 2,2 kW Dkedpfx Aolfdxxjiwol Dimensions (LxWxH) ca, 1.050x600x1.000 mm

Condition: used, engine 2,2 kW Dkjdolfdxuepfx Aiwsl Spindle length je Seite: 175 mm spindle diameter max. 35 mm

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Dkedpfx Aijx Rpghewol Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: excellent (used), Belt sander Make Karnasch Type ALMI AL 100 with 6 different contact rollers or sanding rollers Diameter : 17,5 - 20 - 22 - 28 - 38 - 48 mm belt width 100 mm Dedpfx Ajuf N Scsiwekl length 2000 mm Grinding range for grinding diameter 20 - 76 mm

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm - 2 grinding units Dksdpfx Aoymnz Usiwjl - Belt speed: 25 m/s - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock

Condition: good (used), Year of construction: 1989, functionality: fully functional, Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3,4 kW motor Swivel table Mechanical tilting Additional support and "round" grinding wheels Suction device Movable platform with wheels Djdper D S R Nsfx Aiwekl Weight 250 kg Technical specifications subject to change

Condition: good (used), For sale: SAMCO wide belt sanding machine Table dimensions: 2400x800 mm electric table height adjustment right/left rotation 2 speeds in each direction separate extraction fan Dedpjx A Tv Usfx Aiwekl

Condition: used, Year of construction: 2008, machine/vehicle number: 147233, Ref. no. 20312 Technical Data: Dkjdpfeylylisx Aiwol - Workpiece thickness: 0.8 to 51 mm - Max. working width: 1370 mm - Max. grinding height: 100 mm - Grinding diameter: 150 mm - Grinding speed: 1720 rpm - Feed rate: 3.7 m/min - Drive: 400 V / 9.7 kW - Working height: 1100 mm - Space requirement approx.: W 1700 x H 1200 x D 1200 mm - Weight approx.: 800 kg - Separate mobile motorised grinding dust extraction unit

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Dedpfxoyffxze Aiwjkl Machine width: 800 mm Weight: 530 kg

Condition: excellent (used), Edge Sander De Stefani MVT 2 sanding units Maximum workpiece height: 80mm Self-adjusting sanding unit Manual adjustment of sanding unit Manual angle adjustment of unit Oscillating sanding units Feed speed controlled by variator Dkedpjydkbfefx Aiwsl Feed motor power: 0.74 kW

Condition: like new (used), Year of construction: 2019, Demonstration machine in as-new condition. See documentation. New PHT: €21,000.00; front: €11,800.00. Dksdpfsyk T Ibsx Aiwjl

Condition: new, Year of construction: 2026, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Dkjdpfxov R Tiho Aiwol Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Motor power (S1): 1.0 kW Voltage: 230V Weight: 70 kg Dimensions: 1050 x 600 x 850 mm

Condition: used, SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - Control panel - Automatic loader - Maximum working length 300 mm Dodpfx Aornq Rijiwskl - Min / max working diameter 8/80 mm - Working stations: * automatic loader * turning with n. 2 gouges (roughing + finishing) * 1° shaped knife * 2° shaped knife * unloading

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Dksdpfx Aeycpz Usiwel Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET belt and disc sander JSG-31A with a 300 mm disc diameter. The demonstration unit is in original condition, so you receive the full warranty. Technical specifications: - Motor power: 1.1 kW / 1.5 HP / 230 V - Disc diameter: 300 mm - Disc speed: 2,700 rpm Dksdpfx Aisycc Tdswol - Disc sanding table size: 230 x 420 mm - Sanding table tilt range (disc): -45° to +15° - Belt dimensions: 150 x 1,220 mm - Belt speed: 11.5 m/sec - Belt sanding table size: 190 x 330 mm - Sanding table tilt range (belt): -45° to 0° - Sanding arm tilt range (belt): 0° to 90° - Extraction port: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Shipping (by freight forwarder): Austria: € 70.00 incl. VAT Germany: € 90.00 incl. VAT South Tyrol: € 110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Condition: like new (used), SHOWROOM MACHINE For sale is an as-new ECO Edge Sander KSC-26B 150 mm, equipped with a powerful 4 HP motor for demanding applications. The showroom machine is in its original condition, giving you the full warranty. Technical data: - 4 HP motor (400 V) - Belt length: 2,600 mm - Belt width: 150 mm - Oscillation motor: 0.3 HP - Table size: 750 x 300 mm - Weight: approx. 170 kg Dsdsyb Sgwopfx Aiwokl The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €100.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €150.00 incl. VAT Related terms: ECO KSC-26B, edge sander, 150 mm belt, 4 HP motor, 400 V drive, oscillation, workshop equipment, woodworking, professional quality, sanding technology Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET Oscillating Edge Sander OES-80CS featuring a 400V motor / 2,800 watts and a belt speed of 17 m/s. The demonstration machine is in its original condition, so you receive the full warranty. Technical Data - Motor: 400 V / 2,800 watts - Belt speed: 17 m/s - Belt dimensions: 150 x 2,260 mm - Belt inclination: 90° – 180° - Belt table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm Dodpoyb Sfajfx Aiwskl - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Condition: excellent (used), Double-sided grinding machine COMEC LN2G/8P+CA Working width: 150 mm Number of units: 2 Dkodpfx Aoybaqqoiwel

Condition: used, Used machine Condition: consistent with age Table size: 2600 x 900 mm Max. usable grinding length: 2700 mm Belt length: 7800 mm x 150 mm 1100 mm throat on the right Dkodjxwz N Sepfx Aiwjl Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300x1650x1800 mm Weight: 1300 kg Availability: short term Location: Röllbach

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Air requirement: 2 l/min at 6 bar Weight: 1300 kg Dodpfox H U Nmjx Aiwekl Availability: short notice Location: Röllbach