Used Sand Blasting for sale (2,414)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables Bdsdjzf E Hqjpfx Adrod - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Financial information Bdsdpfx Ajywlfysdred VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2014, condition: not inspected (used), Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments Bsdpfxsx Dng Dj Adredd 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 2022, condition: not inspected (used), Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced Bedpfoxyafkjx Adrodd production control. ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Bdjdpfx Asv D Rg Dedrsd Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Bsdovu Hgbjpfx Adrsdd Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Bdsdpfx Aet Tqy Esdrod Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm Bdjdpsvnv Tqofx Adrod - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg Bdodpfx Aexrlgwodrsd 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, extendable workpiece support

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts Bdsdpjvxqh Defx Adrsd - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine Bsdjdykwlopfx Adrsdd 6 sanding units, each 1.5 kW, max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, (Makor, Delle Vedove, Venjakob, Flader)

Condition: used, functionality: fully functional, overall weight: 3,860 kg, color: grey, operation weight: 3,440 kg, empty load weight: 3,440 kg, loading space volume: 2.6 m³, Year of construction: 2018, Beach cleaner: - Canicas - T230 - Built in 2018 - Fully galvanized - PTO drive (540 or 1,000 rpm) - 5990mm x 2550mm x 2600mm (L x W x H) - Empty weight: 3,440kg; Gross vehicle weight: 3,860kg - Tipping container 2,600l, max. unloading height 2,600mm - Smoother - Rake - Working width: 2,200mm - Max. working depth 300mm - Area performance: 32,000m²/hour Bsdpfsv S Urmjx Adrodd - First-hand municipal equipment Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 1953, grinding wheel dia. x width ca. 200 x 25 mm magnetic clamping plate ca. 450 x 170 mm cross feed of the table 200 mm revolutions of grinding spindle 3000 U/min grinding wheel hole diameter 51 mm weight ca. 1300 kg 0,001 - 0,013 mm grinding length 600 mm Surface grinding machine Bsdjxu Nw Eepfx Adrodd Includes extractor 1 additional grinding wheel holder Machine was in occasional use until recently

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 12 kg, power: 45 kW (61.18 HP), controller model: SIEMENS Simatic, TECHNICAL DETAILS Bodjzcl I Depfx Adrjdd Drum diameter: 400 mm Maximum workpiece length: 700/1,000 mm Maximum individual workpiece weight: 12 kg Load capacity: 100 kg MACHINE DETAILS Control system: SIEMENS Simatic Installed power: 45 kW Centrifugal wheels: 4 units Centrifugal wheel type: Hurricane H 28 Power per centrifugal wheel: 7.5 kW

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Bdedpfx Adsy R I Uqjrod Contact for more details or to arrange an inspection.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets New price currently around €250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight alignment. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in more compact spaces without compromising functionality. The height of the system is fixed. Bdedpsw Ttxfefx Adred Machine Output: Output capacity is approximately 500 kg per hour. Bag Dimensions and Weight: The bag sizes can be fully customized to your requirements. Options range from small bags of approximately 5 grams to larger bags of 20 kg or even 40 kg. Adjustments can be made flexibly to suit your production demands. Buffer Tank: The buffer tank has a capacity of 20 kg. Maintenance Costs: Average annual maintenance costs, excluding materials and call-out charges, are between €1,200 and €1,500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing & packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, second-hand dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low usage, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. • Mobile, containerized manufacturing system • "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. • ISO CO2 tank, 8m3, portable on a frame, manufacturer Wessington Cryogenics Ltd, England. • 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 • All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Bdedey R I Tmspfx Adrod Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), functionality: fully functional, total width: 600 mm, total length: 855 mm, total height: 2,125 mm, Quick-freezing system for baked goods Gram model: SF500 G S RA L2 25B For a maximum of 20 trays, 600 x 400 Digital temperature display from +10 to -30°C Energy-saving system EHT Freezer, ready for connection Freezer with refrigerant R 290 A Connection: 230V Dimensions: 600 x 855 x 2125 mm (W x D x H) Used equipment, cleaned With warranty + spare parts service Bjdpewyruaofx Adrjdd We have many more refrigeration units in stock!

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Bedpfov Idf Iex Adrodd Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: excellent (used), Year of construction: 2011, Fully automatic Rösler dual-stream cleaning system, automated with industrial robots, cleaning chambers with 2 blowers each, each with 2 loading/unloading containers, year of manufacture 2011, including a wet separator. Bsdpfx Aozb Dqhodredd

Year of construction: 2026, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Bdedpfx Asi D Digedrjd Blasting time : Adjustable PLC : Siemens S7 1200 + TP 7'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~12 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES Bjdpfxjvr Tbae Adrodd This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2026, operating hours: 4 h, condition: new, Machine height : ~2950mm Machine width : ~1500mm Machine width with open doors : ~2950mm Bodpfx Aoi Dprnjdredd Machine length : ~2950mm Table diameter : 1200mm Maximum work piece height : 500mm Maximum table capacity : 500kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + Touch Panel 7'' Filter : PC2 (1.500m3/h) Total installed power : ~11kW This type of machine can be assembled before delivery, it takes just a day to prepare it for work. Machine is on stock.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, The machine is in good condition, has been in use until recently, and is now available for sale due to a new purchase. The machine has been regularly serviced. It is ideally suited for sanding solid wood, both straight and profiled parts. Bdedpfezdvupsx Adred The processing side, with its guides, features an adjustable sanding shoe. The feed mechanism is an ideal addition for finer edge sanding on straight edges. The machine has a compressed-air-operated belt oscillation for optimal sanding results. The machine has a chassis. Various sanding belts are included.

Condition: ready for operation (used), Graf wet blasting system, suitable for finishing solid carbide tools. Bdodpfx Aoy Ibvpedrod