Used Setup for sale (1,081)

Condition: good (used), Complete used Tiflex textile screen printing setup for sale: a full manual screen printing line, ready to print t-shirts, sweatshirts, hoodies, polo shirts and garments with plastisol inks. This Tiflex screen printing equipment covers every step of the process: multi-colour printing on a 6-colour manual press, intermediate flash curing between colours, then final curing in an infrared conveyor dryer. A practical solution for textile decorators, garment printers, print shops, apparel brands and new screen printing workshops. 1. TIFLEX 2368000LC MANUAL SCREEN PRINTING PRESS (6 COLOUR, 6 STATION CAROUSEL) - Rotary manual press, 6 printheads and 6 stations - Maximum print area: 40 x 50 cm - Maximum outer screen frame size: 60 x 80 cm - Micro-registration with 3 knobs (X, Y and rotation) for accurate colour registration - Off-contact adjustment, screen/pallet parallelism and front/back pallet adjustment - Sliding pallets locked by ball plunger, rear screen clamping with anti-crush system - Pallet height: 86 cm, net weight: 200 kg - Fully manual, no electrical connection needed, dismantles for transport 2. 16 PALLETS INCLUDED (PLATENS) - 6 x men's XL pallets: 66 x 48 cm - 6 x women's M pallets: 50 x 32 cm - 2 x children's S pallets: 40 x 22 cm - 1 x sleeve pallet: 60 x 15 cm - 1 x sleeve pallet: 40 x 15 cm A complete pallet set for adult, youth and sleeve printing, with enough pallets to run all 6 stations in men's or women's sizes. 3. TIFLEX 40 x 40 CM INFRARED FLASH CURE UNIT (2008, VERY GOOD CONDITION) Codpfx Ais Agvmmeiori - Flash dryer for screen printing, 6 short-wave infrared emitters, 12 kW - Drying area: 40 x 40 cm - Drying timer and air-jet cooling timer - Automatic cycle start by contact rod when the pallet is detected - Half-power setting for delicate mesh - Height-adjustable stand on wheels - Three-phase 400 V, 18 A - Ideal for flashing a white underbase on dark garments before printing bright colours 4. TIFLEX T-IR 80 INFRARED CONVEYOR DRYER (2008, GOOD CONDITION) - Infrared textile dryer / drying tunnel for curing plastisol inks - Useful belt width: 80 cm, length under heating element: 130 cm - Teflon glass conveyor belt resistant to 250 °C - Variable belt speed, temperature controller with digital display - Movable shutters for thick items up to 12 cm (caps) - Fume extraction outlet, diameter 125 mm - Power: 4.8 kW, three-phase 400 V, 7 A - Overall dimensions: 270 x 131 x 130 cm, net weight: 265 kg LOCATION AND SHIPPING Equipment located in Bègles (Bordeaux area), France. Shipping across Europe and worldwide available on quotation. Tiflex screen printing machine, manual screen printing press, screen printing carousel, 6 colour 6 station press, textile screen printing equipment, t-shirt printing machine, garment printing, flash dryer, flash cure unit, infrared conveyor dryer, plastisol curing, screen printing pallets, used screen printing equipment.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm Crjdpfx Aoyr Ugusiiei CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: IA630, working width: 550 mm, compressed air connection: 6 bar, type of input current: three-phase, total width: 2,930 mm, total length: 9,450 mm, overall weight: 3,500 kg, A PERONDI IA 630 CA900 laminating machine and a PERONDI R4L 600 laminator are available for sale. Machine is in good condition and offer an excellent opportunity to expand or upgrade an existing production facility. production size 180x200 to 550x880mm The sale includes the following additional equipment, providing a versatile and well-equipped production setup: Hot-melt glue system Feeder Crodpfx Aio Ah Sq Aoiei Vacuum belt All equipment has been used as part of the existing production line and is offered together with the machine. Machine Highlights Manufacturer: PERONDI Models: IA 630 CA900 and R4L 600 Condition: Good overall condition Maintenance: Well maintained and carefully operated Availability: Ready for continued production Inspection: Possible by appointment This is an attractive opportunity to acquire PERONDI laminating machines together with supporting equipment, suitable for a range of industrial laminating and finishing applications. Further technical specifications, photographs and additional information are available upon request.

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Cedpfxsyybkwo Aiiori Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Voltage: 4x 220-230V (50/60Hz) Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel.

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,770 mm, total length: 4,400 mm, total width: 1,100 mm, overall weight: 1,000 kg, Equipment: documentation/manual, This machine comes fully equipped to provide flawless edges:  1. Pre-Milling Unit (RT-V): 2 counter-rotating diamond heads to eliminate panel chipping and telegraphing.  2. Gluing Station: High-efficiency EVA glue basin with rapid heating and automatic temperature control. 3. Pressure Zone: Driven main roller plus 2 idle pressure rollers for an optimal glue line. 4. End Trimming Unit (K-2): Dual-motor automatic switching for straight or beveled cuts.  5. Fine/Flush Trimming Unit: High-frequency motors with numerical control adjustment for flush, radius, or chamfered trimming. 6. Corner Rounding Unit (Round 1): Complete finishing of panel corners on straight or shaped panels.  Crsdpfj Ah Simox Aiiji 7. Edge Scraping Unit: Eliminates radius chatter lines for a smooth finish. 8. Glue Scraping Unit: Cleans away any residual squeeze-out along the joint line. 9. Polishing/Buffing Unit: Dual cloth motors to restore color and sheen to extruded PVC/ABS edges. 10. Anti-Adhesive Spray System: Dual-liquid spraying device to keep panels perfectly clean. Controls • Interface: SCM Orion electronic control panel with digital display for effortless program setup, unit exclusion, and troubleshooting. • Guide System: Numerically controlled automatic infeed guide. • Safety: CE certified with full enclosure safety hood and safety microswitches. • Material Support: Extendable roller support rail for processing oversized panels.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030 515 428, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Main spindle speed: 50–12,000 rpm Spindle mount: BT 40, JIS B 6339 Big+ Tool magazine capacity: 120 tool positions Preparation for tool magazine capacity: 240 tool positions Pallet changer: 2 pallets Pallet storage: 6 pallets Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Codps Afhlaofx Aiiori Internal cooling: 70 bar Coolant pressure: switchable in 3 stages Coolant pump output: 5.5 kW Coolant flow rate: 17 l/min at 70 bar Coolant pressure: 70 bar External coolant pump: 100 l/min at 1.4 bar Filter capacity: approx. 250 l/min Dimensions of the coolant system (L × W × H): approx. 2,200 × 1,500 × 2,250 mm EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Tool magazine with 120 tool positions, prepared for 240 tool positions Tool changer with 31 tool positions Loading and setup station 2 spiral chip conveyors KNOLL coolant system with scraper conveyor and lift pump Coolant pump KTS25-50 for coolant supply through the spindle External coolant pump Coolant shower Precision NC rotary table instead of the indexing table Direct measuring system and control extension for the B-axis CE marking Tool breakage monitoring Automatic tool length correction Rotating viewing window Note: The machine has already been dismantled.

Condition: like new (used), Year of construction: 2022, operating hours: 761 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, controller manufacturer: Makino Professional 6, controller model: FANUC FS31i-B, spindle speed (max.): 30,000 rpm, operating hours of spindle: 761 h, spindle nose: HSK-E50, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, MAKINO D200Z Makino Professional 6 (FANUC FS31i-B) Professional 6 Version X-axis 350 mm Y-axis 300 mm Z-axis 250 mm B-axis (swivel range) 180° (0° – 180°) C-axis (rotation angle) 360° continuous Distance table surface – spindle center 160 – 410 mm Table Max. load capacity 75 kg Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions) Chuck EROWA Speed range 100 – 30,000 min⁻¹ Drive power (25 % ED / continuous) 15 kW / 11 kW Torque (25 % ED / continuous) 23.8 Nm / 21 Nm Interface HSK-E50 Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm Repeatability X/Y/Z ± 0.0010 mm Positioning accuracy B/C-axis ± 2.0 s Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C. Capacity 20 tools Max. tool weight 3 kg Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions) Max. tool length 200 mm Interface HSK-E50 Connected load 40 kVA Compressed air 5 – 8 bar, max. 500 l/min 2,300 × 1,868 × 3,030 mm 4,600 kg Spindle with 30,000 rpm, HSK-E50 interface Rigid tapping Table with EROWA / System 3R chuck (DD motor), high-precision bearings Linear scales (X, Y, Z) Tool changer with 20 pockets (ATC 20), HSK interface Collision Safeguard (CSG) Robot door, loader interface (A-type) Chip conveyor with drum filter and downstream cyclone filter Flushing channel, air blower, coolant nozzles at spindle nose Fully enclosed work area, safety-guarded operator door Portable hand pendant Super GI.5 control, High-speed smooth TCP, GI-Smoothing Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining 3-dimensional cutter compensation, tilted working plane Dynamic fixture compensation for rotary table, VP control Adaptive control (AC Control), energy saving function 2 GB part program memory, Data Center 1 GB, 1,000 programs Tool compensation memory: 400 offsets, type C 54 workpiece coordinate systems (6 + 48) User macro programming with 1,100 variables MRDF sensor (Machine Relocation Detection Function) EROWA Power Chuck Loader interface (A-type) instead of (L-type) Coolant temperature control unit (constant coolant temperature, with heating) Workpiece wash gun (operator side) Coolant shower Connection for oil mist extraction (Ø 125 mm) Air dryer Tool length measurement by BLUM laser, incl. tool breakage detection 3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point) i-Set-up (additional operator panel for easy workpiece alignment) MML interface (fast Ethernet card) Network integration Remote diagnostics setup (VNC/EDM viewer, installation and training) Credpe Ah D Twsfx Aiioi OPC UA interface for Professional 6 (35 readable tags) Tool retract and re-approach function 3D model of the working area

Condition: used, Hamilton FLOW PCR Setup Instrument – Tabletop Robot Workstation – Pipetting Robot The Hamilton FLOW PCR Setup Instrument is a tabletop robot workstation for the fully automated preparation of PCR and qPCR reaction setups, designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to be integrated into automated workflows. Automation: It automates the pipetting and dispensing of PCR components (samples, master mixes, primers) into 96- or 384-well PCR plates. Volume Range: The hardware is designed for the aspiration and dispensing of volumes up to 1 ml. Traceability: It features automatic tracking of barcodes on accessories and consumables to ensure complete sample traceability. Software Integration: The device uses the FLOW software, which imports test requests from laboratory information systems (LIMS) and reports results back. The software also enables user-friendly configuration of PCR setups. Flexibility: It can be used either as a stand-alone device for PCR setup or in a "FLOW Flex" configuration for combined primary sample handling and PCR preparation. Crodpfx Aeyk Uxnsiioi Accessories: Optional accessories, such as cooling blocks for PCR plates, are available to maintain the integrity of temperature-sensitive reagents. Application Areas Experts from Hamilton and Roche point out that the instrument is suitable for a variety of applications in the field of genomics: Gene expression analysis Genotyping Sequencing Detection of pathogens (e.g., SARS-CoV-2 tests) Clinical diagnostics Power Supply: 115 V AC to 230 V AC (+/-10 %) Frequency: 50/60 Hz +/- 5 % Power Consumption: 600 VA Dimensions: 112.4 × 90.3 × 100.6 cm (W × H × D), depth without automatic loading 79.5 cm Weight: 180 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: fully functional, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed. The machine is partially functional: The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production. The rubber mounts for the slides are brittle and are breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18T) Csdpez H H Dqsfx Aiieri Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine will be dismantled in week 46. Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m Credpo Achxbsfx Aiiji EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories

Condition: used, Year of construction: 2008, Year: 2008 Condition: good  Configuration: - Pile feeder with suction feeding head - Fully automatic setup of the feeder head and ball rail - Automatic buckle plate adjustment - Automatic folding roller adjustment Csdpfx Aiezqatpsijri - 4 buckle plates on the first folding unit - 2 knife folding units - Shingled delivery

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, electronic double sheet detection, registration mark BS + AS, machine height adjustment 300 mm, 1 die-cutting frame, 2 stripping frames and 1 set of stripping pins, quick centering device for sheet stack, manual non-stop system at the feeder, manual non-stop system at the delivery, price includes loading onto a truck (no container loading or sea freight packaging included!) In May 2026, a PLATEN CONDITIONING was performed by BOBST on the machine; all deposits were removed from the upper and lower platen, and the cylinder was polished. The sector was opened and assessed as being in "as new" condition. Photos, video, or invoice available upon request! Attention: The platform must be adapted by the buyer! Longitudinal handrail is missing! Technical main data: Maximum sheet format: 720 × 1020 mm, Minimum sheet format: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Equipment features of the series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast setup times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double sheet detection Attention: Credpfxszmyfdo Aiiji In addition to the machine, the following can be purchased separately for an extra charge: - Foundation/die-cutting frame turning table (third-party manufacturer) (see photo) - Die-cutting frame (see photo) - Honeycomb foundation - Turning table/preparation table, waste stripper (see photo) - Extra stripping frames and stripping tools (see photo)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Csdpfx Aiozrd Tvsijri

Condition: used, Year of construction: 2023, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! For sale is a complete digital printing setup, consisting of three components, which are as follows: - Aeoon Compact Series – Digital textile printer - Aeoon PTB – Pre-treatment unit - Sanco CB160T – Tunnel dryer TECHNICAL DETAILS Aeoon Compact Series – Digital textile printer Manufacturer: Aeoon Technologies GmbH Model: Compact Series Serial number: 20082560 AHP Year of manufacture: 2023 Weight: 1,900 kg Voltage: 3×400 VAC + N + PE Power consumption: 10.6 kVA Frequency: 50/60 Hz Country of manufacture: Austria Compliance: CE Aeoon PTB – Pre-treatment unit Manufacturer: Aeoon Technologies GmbH Model: PTB (Pre-Treatment Unit) Serial number: 30082530 Year of manufacture: 2020 Cedpfsz Duiisx Aiiori Weight: 250 kg Voltage: 1×220 V + N + PE Power consumption: 0.9 kVA Frequency: 50/60 Hz Country of manufacture: Austria Compliance: CE Sanco CB160T – Tunnel dryer Manufacturer: Sanco Technology Ltd Model / Machine Type: CB160T Serial number: CB160T-210-4-120-E-0358 Year of manufacture: June 2020 Weight: 3,000 kg Voltage: 3×400 V, 3-phase + N + PE Current consumption: 100 A Frequency: 50/60 Hz Operating principle: purely electric Country of manufacture: United Kingdom Compliance: CE

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Complete 10 HL brewery from ANT for sale: In use approximately 4 years and 250 batches. In good condition. 1000 L brewhouse 2000 L HWT 2500 L IWT 2000 L BBT 12 x 1000 L fermentation tanks Steam boiler Plate heat exchanger Cedpfs Ah Efajx Aiijri Glycol system Pumps, mill, hoses, etc. Capacity: approx. 150,000 L per year. With a small investment, the setup can be expanded to approx. 200,000 L. Manufactured in 2020, commissioned in 2022. Everything is in working order and was in use until recently. Pickup in central Oslo. We have contacts for dismantling and shipping. Price: We prefer to sell the brewery as a complete unit. Offers on individual tanks and equipment will be considered on an ongoing basis. Prices exclude VAT. Keywords: microbrewery, craft beer, cider, tap tails, pre-batch, production.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 43 h, machine/vehicle number: PR4-3000-0719-0385, control type: CNC control, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console Csdpfx Aio Ahikqsisri - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Prices exclude VAT.

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: Cedj Agb Dzspfx Aiieri ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Drive engine speed: 1800 rpm Fuel tank: 220 L Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: used, Year of construction: 1998, machine/vehicle number: 844, functionality: fully functional, pressing force: 61 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 640 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm Credpfxs Adrzcs Aiisi For sale is a hydraulic 4-column stamping press from the manufacturer ALN August Luigart & Sohn GmbH & Co. KG with a maximum pressing force of 61 tons. The machine has a table size of 1,700 × 1,200 mm, a maximum installation height of 1,350 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm ==== General Information - Manufacturer: ALN August Luigart & Sohn GmbH & Co. KG - Type: Oil-hydraulic 4-column stamping press - Model: 4 SPy 60 SO - Machine number: 844 - Year of manufacture: 1998 - Pressing force: 61 T - Rated force: 600 kN - Table size (working area): 1,700 × 1,200 mm - Ram plate size: 1,700 × 1,200 mm - Table height: 640 mm - Open height: 1,450 mm - Installation height: 1,350 mm - Stroke: 1,000 mm - Front opening: 1,700 mm - Side opening: 850 mm - Installation width front/rear: 1,700 mm - Installation width side: 850 mm - Tool upper part weight max.: 1,200 kg - Total height: 3,992 mm - Total width: 2,645 mm - Total depth: 1,965 mm - Total weight: 12 T - Basement required: no ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 180 mm - Piston rod diameter: Ø 160 mm - Guide column diameter: Ø 125 mm - Stroke: 1,000 mm - Max. working pressure: 236 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s - Setup speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 25 kW - Oil tank: 650 l - Oil type: HLP ISO VG 46 - Oil filter fineness: < 25 µm - Operating temperature max.: 60 °C - Pneumatic pressure accumulator: yes ==== Tooling - T-slots: 5 - T-slots according to DIN 650 / T22 M20 ==== Control System - Control: SIEMENS SIMATIC Touch Panel - Control panel: on the frame - Two-hand operation - Valve voltage: 24 V DC - Control voltage: 230 V AC ==== Safety - Stroke end damping - Follow-up stroke: 26 mm - Follow-up time: 113 ms - Safety distance: 228 mm - Emergency stop - Light curtain / light barrier - Protective grid - Separate control cabinet - Maintenance platform: no ==== Electrical Connection - Operating voltage: 415 V - Frequency: 50 Hz - Power supply: 3PEN - Connection cable: 16 mm² - Fuse: 63 A - Main motor current consumption: 48 A - Noise level: < 70 dB(A) ##### Application areas: Stamping, forming, straightening, press-fitting, assembly operations, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic stamping press, 4-column stamping press, oil-hydraulic stamping press, hydraulic press, hydraulic press, ALN press, August Luigart press, 4 SPy 60 SO, 61 T press, 61-ton press, forming press, stamping press, straightening press, assembly press, industrial press)

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and long-hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single setup. Motor power 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1 - 20mm, by Röhm. Pneumatic adjustment of the processing height, allowing dowel drilling on two levels without re-adjustment. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment 430mm, stepless or in a 12mm grid. Maximum height adjustment approx. 100mm above the table height. Drilling stroke approx. 150mm. 2 pneumatic workpiece clamps. Grid rail for quick adjustment laterally in a 12mm grid. Stop for length adjustment during long-hole milling. 2 swiveling workpiece supports. Special stop system approx. 3.1m long with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, uprights, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. A few minor paint touch-ups. Almost new condition, see original photos. Dimensions approx. 1500 x 900 x 1400mm (LxWxH), weight 300kg. Codpfxj Aa A Eqe Aiijri The machine can be demonstrated on-site after prior appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this provider."

Condition: used, Year of construction: 2019, machine/vehicle number: FA76, Used ATLANTA srink wrapping machine - Year 2019Technical Specifications & Performance DataUsed Atlanta type shrink wrapper, manufactured in 2019 and supplied as two units. The equipment is configured for secondary industrial packaging with a current 3x2 pack layout, providing compact film-wrapped bundles for efficient handling, transport and distribution.Quantity: 2 unitsYear of manufacture: 2019Current pack configuration: 3x2Capacity: 40-45 packs/min, ( 2.400 - 2.700 Packs/hours).Installed power: 5.9 kWElectrical supply: 400 V, 50 HzOperating air pressure: 6 barAdvanced Automation & Control SystemsThis shrink wrapper is designed for automated bundle formation and film wrapping within an industrial packaging environment. Its dry-run capability supports testing, setup and verification procedures without product flow, helping operators check the packaging cycle before production operation.The machine uses a 400 V, 50 Hz electrical supply and requires compressed air at 6 bar. These utility requirements should be coordinated with the available site services during installation and recommissioning.Production Line Integration CapabilitiesThe Atlanta type shrink wrapper can be positioned downstream of bottling, labeling or other primary-packaging equipment to create stable multipacks. With its 3x2 layout, it is suited to packaging-line applications where grouped containers require film protection and a practical handling format.In a used bottling line or second hand industrial packaging installation, shrink wrapping equipment typically interfaces with infeed and discharge conveyors. It can support beverage production and other containerized products where bundled packs are required before palletizing, warehousing or distribution.Machine Condition & Maintenance HistoryBoth machines are used and were operational until dismantling. They are reported to be in perfect working order, with no spare-parts replacement required. The equipment was dismantled during the current year and is suitable for professional installation, commissioning and integration into a production line.Operational Performance & VersatilityWith a stated output of 40-45 packs per minute, this shrink wrapper is designed for consistent secondary packaging throughput. The 3x2 pack arrangement provides a defined bundle format for film-wrapped products, supporting orderly downstream handling in industrial packaging operations.Dry-run operation is available, allowing functional checks of the packaging sequence. This feature is useful during installation, line setup and routine operational verification.Installation Requirements & Site PreparationInstallation requires a 400 V, 50 Hz electrical connection, 5.9 kW installed power and compressed air at 6 bar. As the two units have been dismantled, site preparation should include suitable floor space, conveyor alignment, electrical connection and pneumatic supply routing for reliable integration with upstream and downstream packaging machinery.Safety Standards & Compliance CertificationThe shrink wrappers should be installed a... Crsdpj Aia Etsfx Aiisi

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Csdpfxjz R Rpbj Aiijri Koszalin, Poland

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11520, input voltage: 400 V, total length: 7,500 mm, total width: 6,450 mm, total height: 2,300 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2022, overall weight: 3,800 kg, input current: 32 A, product height (max.): 280 mm, Equipment: documentation/manual, QUICK SALE WANTED K9 High-Speed Fully Automated Single-Colour Screen Printing Machine – Complete with K23 Scrambler, Hopper & Deco Inspection System For sale: K9 high-speed, fully automated screen printing machine, configured for single-colour printing. Designed for efficient production printing around cylindrical items, with applications including bottles, tubes and similar containers. Supplied complete with K23 scrambler and hopper for automated product feeding, plus a Deco camera inspection system to support print-quality monitoring during production. Printing capabilities: Item diameters: 20 mm to 130 mm Item lengths: 40 mm to 280 mm Single-colour printing High-speed automated operation; output depends on the item, artwork and machine setup K23 Scrambler & Hopper Credo Aba Ilepfx Aiioi Provides product sorting and feeding to the printing machine, helping reduce manual handling and maintain a steady supply of items during production. Deco Camera Inspection System Included for inspection of printed decoration, helping operators monitor print consistency and identify quality issues during production. Service History Full service history prior to being placed into storage. Package includes: K9 fully automated single-colour screen printing machine K23 scrambler and hopper Deco camera inspection system

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS Codozb Ufvspfx Aiieri • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers Complete, ready-to-run SLS production system in great condition, sold as one package What is included - 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total) - 1 x Formlabs Fuse Sift powder recovery station (230V) - 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included] - 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step) Hours and condition - Printer 1: 1,369.68 print hours Cjdpfxo Adqx Ts Aiijri - Printer 2: 183.6 print hours (very low) - All units in great condition. Serial numbers available on request. Why this setup Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes. The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed. Key specification (per printer) - Build volume: 165 x 165 x 300 mm - Laser: ytterbium fibre, 30 W - Layer thickness: 110 microns - Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A - Power: 230V, dedicated circuit Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss. Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine. Viewing by appointment.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Codpfx Asz Dhrqoiisri Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.