Used Romania for sale (642)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m Csdpfx Aszg Iw Ioilogw - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Used heat-sealing machine for medical blister, make: MEDIPACKER, model: TS 3535, Serial number: 635-231; MFG: September 2018, dimensions: Width 470 mm X Depth with guide bars 710 mm X Height 660 mm, net weight 112 kg without tools, seal surface 350 x 350 mm Max., depth of Blister 105 mm; The used heat-sealing machine is sold with the mould (please check the pictures); The filled blister packs are placed on the support plate. The die-cut lid is placed on the blister pack; positioning is using pins. The carriage is pushed to its rearmost stop. The sealing cycle is initiated automatically. After the sealing cycle, the carriage is pulled back again. With its compact and durable design, this table model has been specially developed for the medical industry and use in clean room areas. The three process parameters— Time, Pressure, and Temperature—are regulated to the tightest tolerances, resulting in a high-quality package. Rust-free INOX construction with aluminium parts anodized. The sealing temperature is digitally programmable up to max. 190 °C feedback control accuracy at 130 °C = ± 1.0 °C measured at the hotplate PID feedback control system. The sealing force is programmable via touch screen from 6 kN to 36 kN, adjustable in 1 kN steps, repetition accuracy within 0.5 kN. The sealing time is programmable from approximately 1.0 to 9.9 seconds. The program is adjustable by 0.1 seconds each. The repetition accuracy is better than 0.15s. Output approx. 12 Cycles/Minute, without placing and removal of trays compressed air connection 0,6 Mpa/6 bar, tube outside 12 mm, tube length 3 m. The compressed air must be supplied filtered and dry. The consumption of compressed air per cycle at 16,5 NL to 0,5 MPa; The electrical connection is 230 VPNE 50/60 Hz, max. 2300 VA; 3 x 400 V, 50 Hz, max. 4100 VA Sealing lid from a film roll For Romanian companies, finance leasing or credit in instalments is possible, with a minimum of 50% down payment. Price 6,500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Cedpfx Ajvubapoilsgw Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 24205, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 100 mm, workpiece length (max.): 4,800 mm, workpiece width (max.): 1,800 mm, number of slots in tool magazine: 18, overall weight: 16,000 kg, spindle motor power: 12,000 W, number of spindles: 1, workpiece diameter (max.): 1,800 mm, Equipment: chip conveyor, documentation/manual, Exceptional machine and exceptional quality output. Machine was serviced by IMA technicians and original spare parts where used. Optic fiber and most of the compressed air pipes have been replaced with new ones. The automatic positioning of the vacuum cups is speeding the setup time. ImaWoop version 6.0 with Quicktool is making the operator life easier. You are always welcome to see the machine working. Anytime, a live visualisation of the machine through video link is available. CNC-portal processing centre make: IMA type: BIMA P 480 V, 180/480 Year of production: 2001 Short description Machine able to do a lot of complex tasks (milling, drilling, cutting, edgebanding, various angle cutting) - alternate processing - X = 2 x 2.400, Y = 1.800 mm - main spindle 12 kW - 18-fold tool changer - gluing unit with 6-fold coil-magazine Description working area with standard units Y = 1.800 mm changing table area with alternate processing: Cgodjtt Rpwepfx Ailew X = 2 x 2.400 mm /milling- and boring processing X = 2 x 2.100 mm /gluing processing CNC-line control IMATRONIC NT 231 Software Imawoop 6.0 automatic positioning of the vacuum cups Automatic lubrication Conveyor for waste and chips (belt) main spindle 12 kW with integrated C-axis 360 degrees autom. tool / adapter units changer 18-fold 1 edge gluing unit VT100 with glue application device edge thickness: 0,4 – 3 mm for 4-sided edgebanding and all around edgebanding with butt joint 6-fold coil magazine 1 end-trimming unit 0,8 kW adapter units included - saw, 90 degrees fixed - horizontal drilling unit with 4 ways - ABS edge milling unit - ABS edge radius scraper and horizontal scraper unit other adapters and tools available for extra cost Chip removal transport belt Air conditioned included in the electric cabinet

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200713, total width: 950 mm, total length: 1,050 mm, total height: 890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 585 kg, oil tank capacity: 13 l, rotational speed (max.): 6 rpm, Electric bending machine P54 Evo Bending machine for concrete reinforcing rebar, studied for high volumes of production. Bending capacity: - 1 rod Ø44 mm (1.73 in) / res. 65 kg/mm² - 1 rod Ø40 mm (1.57 in) / res. 85 kg/mm² Engine 4 kW (5,5 CP), power 400 V (three-phase) Dimensions: cm 105 x 95 x h. 89 Cgjdpfozgv Hdjx Ailew Net weight: kg. 585 Operation electric Product handled: concrete reinforcement Displacement: horizontal Bending capacity: Min.: 2 mm; Max.: 44 mm RPM 6Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; A set of Allen keys, for ordinary maintenance; An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine; A set of wheels, for the machine handling; An industrial plug, that guarantees the electrical connection; Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending. Price Euro 3.660 Euro + VAT, negotiable, ExWorks Oradea, Romania. Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: new, Year of construction: 2025, laser hours: 1 h, laser power: 12,000 W, power: 12 kW (16.32 HP), Description AORE PG3015: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 3015 mm table width 1550 mm laser head ( BOCI ) autofocus laser capacity Kw 12 overall dimensions 8.250 x 2.880 x 2.320 mm weight of the machine ca. 8.700 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Boci autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 45 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 375 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (12 second max for changing) - automatic change, max load on tables 1.440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 120 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our Cjdpfx Ajvgrl Heilegw technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, Model: TITAN SC-27 (SC2500) Cgjdpfszgr Evsx Ailow Manufacturer: FMUA – Fabrica de Mașini-Unelte Arad Romania License: I MUAB / TITAN, Bucharest Table diameter: ø2500 mm Export agent: Masinexport, Bucharest

Condition: like new (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32) Technical ParameterSpecification and Values Manufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 Series Equipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid) Bowl Inner Diameter305 mm Bowl DesignFlat-cone design with an extended length (Extended L/D ratio) Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration) Maximum Solids Density2.6 kg/dm³ Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake) Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD) Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mm Total Weight (Complete Skid)Approx. 2500 kg Lubrication SystemAutomatic centralized grease lubrication for main bearings Construction MaterialsHigh-grade duplex stainless steel (all product-contact areas) Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edges II. Liquid Discharge Under Pressure System Unlike standard models with gravity discharge (where the liquid falls freely into a collection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is located. Kinetic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary disk. Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen. Cgedpfszgq Szsx Ailow Electrical cabinet with frequency inverters and PLC (Siemens) with an access code for modifying the parameters, including factory documentation.

Condition: used, functionality: fully functional, mileage: 178,419 km, fuel type: diesel, overall weight: 50,000 kg, first registration: 03/2011, Year of construction: 2011, operating hours: 11,837 h, machine/vehicle number: IF75RFR, Equipment: ABS, additional headlights, adjustable boom, air conditioning, all wheel drive, cabin, crane, onboard computer, parking heater, traction control, trailer coupling, Liebherr Crane - Model LTM 1050-3.1 Application: construction Drive: wheels Cgjdpfxjxnkc Nj Ailew Own weight: 39,500 kg Lifting capacity: 50,000 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 100 h, Automatic machine for the production of decorative (EPS) polystyrene ceiling tiles for sale. The machine has a very high production capacity, producing one tile every 3 seconds. The raw material used is EPS 100 polystyrene. The thickness of the tiles can be adjusted, with a minimum thickness of 7 mm. The machine can be operated by a single person. The polystyrene sheets are loaded on the left side of the machine. The machine automatically feeds them, stamps the pattern, and ejects the finished tiles on the right side, where they can be packed directly into boxes. Csdpfx Aiezgf Ahelogw Tile dimensions: 500 × 500 × 7 mm Machine dimensions: 4 m × 0.8 m × 2 m Power supply: 220 V The investment can be recovered in a very short time – within a maximum of one year. The machine was used for approximately one month and is almost new. The price is for the machine only. Price does not include VAT. The 8 molds are sold separately at €1,200 each.

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 24006414, • Ultimate on-site metal testing capability with 46 elements in 16 metal matrices in 2 seconds for most elements, 7 seconds for light elements (e.g., Al, Si, Mg); on-site calibration for elements and applications not covered by factory methods. • Designed for all-day single-hand use: Balanced, size-optimized, comfortable, easy-to-read display; quick-action software: powered by Android, designed for touch operation, quick access to all functions. • Data & documentation everywhere: GPS for location, cameras for visual records, WiFi, Bluetooth, USB, and microSD for documenting and transmitting results. Lab-on-the-go: from handheld to a mini-lab system when connected to the docking station with a sample chamber. The all-new SPECTRO xSORT model XHH04 is packed with a host of new features and designs to maximize user speed, ease, and convenience – along with advanced analytical performance. This innovative handheld XRF gun analyzer quickly handles just about every on-site metal testing need imaginable, from the scrapyard or factory to the foundry floor. Powerful, flexible SPECTRO xSORT XHH04 provides outstanding coverage across the spectrum for all common types of metals and alloys – including 46 elements in 16 metal matrices. All without requiring operator decisions. And if an uncommon element or application is not factory-installed, the SPECTRO xSORT XHH04 handheld analyzer provides experienced users with a smart on-site calibration option on the PC. The SPECTRO xSORT XHH04 delivers high-throughput, highly reliable elemental testing and spectrochemical analysis of countless metals and their alloys under widely varying conditions. FAST Entry-level SPECTRO xSORT Alloy delivers metal grade identification in a few seconds. The even more powerful standard SPECTRO xSORT analyzes most alloys in only 2 seconds! Even alloys with light elements (aluminum, magnesium, silicon, phosphorus, sulfur, etc.) can be identified in 7 seconds. As a result, plant personnel or contractors can complete hundreds of inspections per shift – boosting productivity and profitability. EASY Reduced in size and better balanced than previous models, SPECTRO xSORT is optimized for day-long, fatigue-free, one-handed operation. The ergonomic design includes a light-squeeze trigger, a 5” large, easy-to-read, wide-angle, high-definition display, extra physical buttons ideal for gloved hands – and a smaller probe head for access to tight spaces. Results: effortless operation with all-day comfort. Cgedpfszgbwbjx Ailsw FLEXIBLE Factory methods offer maximum analytical flexibility, with 2 collimator spot sizes (3 mm and 5 mm). Users get ultra-wide coverage of elements and alloys, plus sample sizes. And operators don’t have to switch methods between samples.

Year of construction: 2015, operating hours: 3,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: R1805, Description: Take a look at WOKO MAGNET UND ANLAGEBAU GmbH. Cjdpfxszgbrrs Ailogw

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Cedpjzgblrsfx Ailsgw Wood Light metal shavings Electronic scrap

Condition: like new (used), Year of construction: 2016, volume flow: 5 m³/h, energy consumption: 35 kWh, peeling centrifuge 3000 rpm , 630 mm diameter bowl Cgodpfxsvm Ur As Ailjw

Condition: ready for operation (used), Rack shaping machine EZ-9V Processing length: 1200 mm Cedpfsuw Tvfsx Ailsgw Max. module: 12 mm Max. rack width: 200 mm Length of cut rack: 1100 mm Width of cut rack: 170 mm Cut module: 12 Weight: 10200 kg Rack shaping machine is intended for cutting of teeth of gear racks by using a method of work-piece running with a gear cutter. Rack shaping machine allows to make spur and helical gear racks of up to 1200 mm long and 12 mm maximum modul

Condition: excellent (used), Jig boring machine J6B and jig grinding machines J6GA and J4GB Cgedjyartnepfx Ailjw

Year of construction: 1984, condition: used, Used Horizontal borer TITAN AFL 150 CNC CNC Heidenhain - X column - 9000 mm; - Y vertical - 2000 mm; - W spindle - 900 mm - Z column cross - 600 mm - spindle speed 900 rpm - spindle dia. 150 mm - Machine weight aprox. 50 tons Floor plates 2 pcs. 2000x6000 Rotary table Skoda E20 Cgjdpfsb Hv Twjx Ailjw

Condition: new, Year of construction: 2025, turning height: 2,800 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,300 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, faceplate diameter: 3,000 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, rotary table diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, rotational speed (max.): 92 rpm, rotational speed (min.): 1 rpm, table load: 30,000 kg, table diameter: 3,000 mm, REM Vertical Turning Lathe TURNING DIAMETER SCR 33 MANUAL with DRO Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS , HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES - NO CNC CONTROLL - NO EXPANSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATE - EASY LEARN Technical Details: Faceplate Diameter (mm) 3000 Cgsdsv Ilg Hepfx Ailew Max. Turning Diameter (mm) + 300 Machining Height: 2800 mm Max. Work Piece Weight: 30 tons Conventional Control DIGITAL READ OUT for each axis

Condition: good (used), Year of construction: 1999, functionality: limited functionality, cutting force: 60 t, power: 294.2 kW (400.00 HP), empty load weight: 60,000 kg, mount diameter: 12,000 mm, filling weight (max.): 200,000 g, filling weight (min.): 1,000,000 g, total width: 5,000 mm, total length: 120,000 mm, total height: 6,000 mm, overall weight: 60,000 kg, cutting length (max.): 8,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, feed length X-axis: 50,000 mm, pressure: 6.5 bar, We offer this Copex BR5325 scrap shear for sale, in good condition, manufactured in 1999. Machine reference: BR5325 Axle load (loaded): 41200 kg Inlet pressure (loaded): 6.5 bar Outlet pressure (loaded): 5.9 bar Inlet pressure (unloaded): 6.5 bar Codpfjzfqrxox Ailegw Cushion pressure axle 1 (loaded): 3.8 bar Cushion pressure axle 2 (loaded): 3.8 bar Cushion pressure axle 3 (loaded): 3.8 bar If you have any further questions or require additional information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2021, operating hours: 21,000,575 h, functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units are easy to set up and install, with the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; Codpjwhmm Hsfx Ailjgw • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; • Liquid temperature: up to 80 °C; • Installation: dry, horizontal, on a support plate. Price Euro 2.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Condition: reconditioned (used), functionality: fully functional, actuation type: hydraulic, Equipment: type plate available, We offer this Tagliabue guillotine-type hydraulic shear, which has been refurbished, manufactured in [constructionYear]. Cgedpfxjzfipvj Ailew If you have any further questions or require additional information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg Cgsdozb Ufvjpfx Ailow • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Areas of use: medical, food: storing vegetables and fruits. The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. Cgedpfxourf I Uj Ailow The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Price: 8,500 Euro + VAT, negotiable, FCA: Oradea/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, Solariums for garden and flowers at low prices and maximum quality made of galvanized steel, all sizes Cgedpfxsxxdmvs Ailew

Condition: ready for operation (used), Year of construction: 2015, GIUSTINA R 114 CNC Fanuc Centerless Grinding Machine CNC Control: FANUC Series 18i - MB Codpozdnx Tofx Ailjgw Grinding capacity: Ø 1.5 to 500 mm Operating grinding wheel: Ø 610 x 508 mm Conductive grinding wheel: Ø 355 x 508 mm Weight: approximately 15 tons

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, overall weight: 122 kg, LASER IN LIKE-NEW CONDITION, USED ONLY FOR TESTING AND DEMONSTRATION PURPOSES Laser cutting and engraving machine for the signage and promotional marketing industries - made in USA ▪ CO2 laser tube in a sealed metal housing, 25 KW power, air-cooled, 10,640 nm wavelength, approximately 30,000 working hours lifetime. ▪ The laser source can be quickly replaced using the 'Quick-Change' system, without technician intervention or the need to realign the laser beam. Universal manufactures only RF-Excited sealed CO2 laser sources, which provide constant power output and require no maintenance. ▪ Maximum material dimensions: 737 x 584 x 229 mm, but larger materials can also be processed as the front side is open. ▪ Working area: 610 x 457 mm ▪ Honeycomb cutting bed - minimizes contact between the material and the reflective engraving table and more efficiently removes particles and fumes generated during cutting ▪ Maximum supported material weight: 18 kg ▪ Machine dimensions: 914 x 965 x 914 mm ▪ Electrical connection: 220 – 240V / 5A The package includes the following optional features: ▪ BOFA filter, 400 m3/h air flow – allows use even in enclosed commercial spaces ▪ Focusing lens with a 2.0” (5.08 cm) focal length and 0.125 mm focal spot diameter ▪ HPDFO focusing lens + beam collimator. Focal length: 2.0” (5.08 cm), Focal spot diameter: 0.025 mm – Suitable for marking metals ▪ Rotary attachment included – maximum object diameter for rotation: 203 mm ▪ “Air-Assist” cooling and cleaning system – Delivers a clean air jet over the material surface to suppress flames and improve engraving/cutting quality. Also helps to clean the equipment’s optical components (mirrors + lens) Codpeytdtyjfx Ailegw ▪ Metal cone for directing airflow at 90 degrees onto the material ▪ Back-Sweep – hose for directing airflow at 45 degrees onto the material ▪ 2 bar pressure compressor – PICCOLINO brand, supplies clean air for the “Air-Assist” system ▪ ‘Laser Interface+’ operating software: user interface allowing for automatic or manual control over power, movement speed, laser pulses (PPI), and other system settings. Includes a materials database with predefined settings according to the processed material; simply select the material type from the list and the driver loads the optimal parameters for cutting/engraving. Settings for custom materials not in the standard database can be saved, stored, and loaded. To maximize processing efficiency, the interface can estimate the remaining time for engraving or cutting. ▪ Additional 1Touch Laser Photo software – for high-precision engraving, including for complex image engraving.