Used Rockwell Hardness Test for sale (12,477)

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Gusdpfxowylv De Afish Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Testing system for measuring tensile and compressive forces up to 100 kN Manufacturer: Zwick Type: 7045.370.1a Materials testing machine Tensile and compressive forces up to 100 kN PC Software: testXpert testing software Documentation: Basic program for tensile and compression testing Zimt command interpreter Instruction manual Cards & Modules: Zwick ZPS 7095.1 Rev.: d Power supply unit Zwick ZPU 7095.2 Rev.: j Central processing unit Zwick ZAST 7096.4 Rev.: f Drive control unit Sieb & Meyer AC-Servo 26.39.2 AC-Servo module Dimensions: Height: 3200 mm Width: 1120 mm Depth: 620 mm Weight: 1140 kg Modernization of the Frank machine 81120 1995 Cost: 113,000 DM Modernization of the universal testing machine with digital measurement and control electronics Additional slots for 3 connection cards Remote control for extended control of the testing machine during setup and test execution Measuring amplifier (TF) for force or analog length change Connector for voltage measurements (e.g., single strain gauge with preamplifier), without calibration Connector for strain gauge transducers for force or displacement measurement, without calibration Control unit with IEEE 488 bus card ZIMT program for calibrating the force transducers in conjunction with the DK 38 MGT 32 S 71 (0 ... 10 V output) and the Keithly 182 digital multimeter Program sequence: 10 calibration steps under load or unload Files are available in the ASCII file Drive unit for the Frank 81120 AC Motor Resolver with motor plate Find more new and used items in our shop! International shipping costs on request! Gujdpfx Asqtrkdefijh

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, fuel type: electric, Forklift battery 48V 6PzS750 TEST +100% TESTED Year of manufacture: 2024 - test date 2025 Dimensions (lxwxh): 830mmx735mmx630mm Weight 1013kg Guedpfx Afeu Sh D Hsijh Battery has been serviced and tested by specialist company. Capacity test (C5 discharge test) 757/750 Ah battery Residual capacity: 100% percent With Aquamatik filling system (BFS) With terminal screws but WITHOUT end drainage

Year of construction: 2019, condition: like new (used), functionality: fully functional, - Low temperature (freezer) - Pummel test (adhesion test) Gsdpew D Rx Sofx Afijuh - Sourbox (acid resistance test) - Ball drop test - High temperature (furnace) - High humidity test (steam)

Condition: excellent (used), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liter with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development, and quality assurance applications. Device Description: For sale is a professional temperature chamber from the manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This powerful unit is suitable for a wide range of demanding environmental simulations—from material testing and electronics tests to long-term climatic stress tests. Technical Data (Excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –40°C to +180°C Temperature deviation in steady-state conditions: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rates (without test specimen): Heating: 4 K/min Cooling: 3 K/min Control system: SIMcon 32-net with touchscreen panel Interfaces: RS232, optional RS485/422 1 × port NW 50 mm left 1 × port NW 125 mm left 2 × ports, each NW 125 mm right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight: approx. 675 kg For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Shipping / Collection: Collection preferred Shipping on pallet via freight forwarder Europe-wide possible. (Shipping costs depending on effort) Condition: used Scope of delivery: (See picture) Gujdpfx Afswybb Neish (Specifications and possible errors subject to change!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Power rating: 13 kW Weight: 1300 kg Gusdpfxsph U Dhs Afieh Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 incl. Programming/Evaluation Software CID-PRO – Year of manufacture: 2020 – Water-cooled – Fully equipped – Excellent condition For sale is a high-quality climate test chamber CTS C-70/600 from 2020, with the latest housing design, water cooling, and extensive special equipment. The unit is ideally suited for precise climate and temperature testing in research, development, and quality assurance. Full Equipment includes: - Volt-free contact for fault reporting - 2 digital outputs, volt-free – for controlling test samples externally - Software temperature limiter (min. and max. freely adjustable) - Ethernet interface Gujdpfowxxf Asx Afijh - Programming and evaluation software CID-PRO included - Observation window in the door - Automatic water replenishment - Independent temperature limiter (PT100) - 1x pipe port NW 50 (right side) - 2x pipe ports NW 125 (right side) - 2x pipe ports NW 125 (left side) - Compressed air connection, switchable via digital channel – for dry compressed air to prevent condensation - Mobile/caster-mounted device design Temperature Testing: - Temperature range: -70 °C to +180 °C - Temperature deviation: 0.1 K to 0.3 K over time (in stabilized condition) - Mean temperature change rate, without test item and without radiant heat: Heating: 3.5 K/min Cooling: 3.0 K/min (in the range from +180 to -65°C) - Radiant heat max. 4000 W at +20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 98% rel. humidity - Dew point range: +7°C to +94°C - Temperature deviation: 0.3 K over time - Humidity deviation: 1 – 2% r.h. over time up to 90% r.h. max. 1 – 3% r.h. over time above 90% r.h. Test chamber dimensions: Height: approx. 850 mm, Width: approx. 850 mm, Depth: approx. 830 mm External dimensions: Height: approx. 1900 mm, Width: approx. 1115 mm, Depth: approx. 1850 mm Test chamber volume: 600 liters Electrical connection: 400V 3/N 50Hz Power rating: 8.7 kW, Nominal current: 14.6 A Refrigerants: R452A / R23 Weight: 700 kg Important information for your security as a buyer! The following steps are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See image) (Specifications and information subject to change and error!) We are happy to answer any further questions you may have by phone.

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climatic test chamber -70 to +180 °C Manufacturer: Weiss Umwelttechnik GmbH Type: Climatic chamber WK-1000/70 Test chamber volume: 990 liters Temp. range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Nominal output: 13.8 kW Refrigerant: R 404A Guodjph U Ayjpfx Afijh Control system SIMCON/32 microprocessor-controlled control and monitoring system - 32 bit technology - Graphic display of setpoint and actual value - Digital setpoint and actual value display of temperature and % relative humidity - digital input for temperature in °C and humidity in % rel. humidity - Integrated programmer - program memory - Manual and automatic operation - Fault diagnosis system Operating hours: 34303.8 h Year of construction: 2004 Test area dimensions: Height: 950 mm Width: 1100 mm Depth: 950 mm External dimensions: Width: 1400 mm Depth: 1900 mm Height: 1970 mm Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1,000 kg Guedpowxc I Usfx Afioh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2005, Vötsch Shock Test Chamber VT 7012 S2 Systems for Extreme Temperature Changes Temperature shock testing tests the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are exposed to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and the accelerated aging caused by temperature changes can reveal weak points in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the elevator car Car load capacity: 50 kg for the VT3 7012 S2 All-round gratings in the elevator car secure the test specimens High air circulation rate, short temperature cycling times, and even temperature distribution in the test chamber Hot chamber can be used as a temperature storage device, while the cold chamber can be used as a temperature cycling device Touch panel for convenient editing of simulation programs with graphic display Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test room dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Year of manufacture: 2005 Protection class Device: IP 42 Control panel: IP 20 Control cabinet: IP 54 Characteristics for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in steady state Temperature deviation over space: +_ 2 K Godpfxjph Uz Uj Afiouh in steady state in the elevator car Heating rate of hot chamber: 11 K/min Cooling rate of cold chamber: K/min Heating rate of cold chamber: 2 K/min Cooling rate of hot chamber: K/min Observation window: 355 x 355 mm Pipe penetration: 67 mm Weight: 1000 kg Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), Espec Here we offer an Espec(ThermoTec) stress test chamber. Overpressure humidity tests at over 100 degrees in many different modes Program capacity of 10 patterns with 30 steps per pattern A variety of protection mechanisms; overheat/overpressure protection, detection of water- supply failure.Complete door interlock and temperature sensor. Saturated Temp Range 105 to 142.9°C Unsaturated Temp Range 105 to 132.9°C Humidity range 50 to 100% r.h. Nominal pressure 0.196 MPa at 132.9°C and 100% e.F. External dimensions: width 740 x height 1553 x depth 1000 mm Test chamber dimensions: Width 355x Height 355 x Depth 426 mm Other equipment: with rails and grid Gusden Arznepfx Afish Test material connections in the interior Type: EHS-221M Scope of delivery: See pictures 300 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RMS Vibration Test System Here we offer you a RMS electrodynamic vibration test equipment. Technical data: Sine:7,5 KN Noise:6,7 KN Shock:13 KN Displacement pk-pk:26 mm Speed: Sine 1,5 m/s noise 2,5 m/s Shock 2,5 m/s Acceleration:100g Cooling:air cooled Type : SW 3509 + amplifier TGD 6000-000.00 and fan total weight ca 4000kg Condition: used / used Gsdpfx Aohylymjfijuh Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), RS Simulators Here we offer a test cabinet. Water cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800mm (WxHxD) Outer dimensions: 1100mm x 1850mm x 1500mm (WxHxD) current consumption: 13,5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Type: TS 600/45 Explosion proof operation not tested but Max 160°C in this Guedpfxog Urq Io Afieh Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss temperature shock test chamber air cooled ( Compressor was renewed ! ) Specification: Gjdok E Htyepfx Afijuh Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot-/cold chamber 10 s Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with swivel arm ) without....ca. 1820 mm with....ca. 1915 mm Depth ( without and with test chamber door ) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Type: HT 7010 Heraeus Vötsch temperature test cabinet, water-cooled Temperature deviation in time ± 1 K Temperature deviation in space ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x side feedthrough 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components Guodpfohhyz Sjx Afijh 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50 Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant Gusdpfeu H U Twex Afish 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Here we offer an Espec (ThermoTec) stress test chamber. Outer dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions W x H x D: 355 x 355 x 426 mm Godpfx Aspdm Uyofiouh 2 x 46 l Voltage 230 V 1/N 50 Hz Rated current 37A Fuses 250 V , 2 x 3 A Type: EHS-221MD Temperature range: + 105°C to + 142.9°C Humidity range 75 to 100 % r.H. Temperature constancy: -+ 0.5 °C Pressure range: 0 to 2.0 kg/cm² Heat-up or pressure build-up time: from 0 to 2.0 kg/cm² in about 60 minutes 390 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Gedpfx Afouudx Dsiouh Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a temperature test cabinet. Water cooled Technical performance data: Temperature working range Temperature range in °C -70 / +180°C Rate of change according to DIN 50 011, part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions height, approx. 750 mm, width, approx. 650 mm, depth, approx. 720 mm External dimensions height, approx. 1800 mm, width, approx. 850 mm, depth, approx. 1640 mm Operating data: Electrical connection 400 V, 3/N, 50 Hz. nominal power 13,3 kW Gjdpjn Sl T Sefx Afieuh Refrigerant: R404A / R23 Weight: approx. 650 Kg Type: TS-70/350 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Type: TSS-70/130 CTS water-cooled temperature shock test chamber Type series TSS -70/130 Test chamber volume 130 liters Test chamber dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Temperature operating range: Temperature range in °C : Hot chamber +50/+250°C Cold chamber -80/+100°C Retempering of ICs < 15 min in kg 10.0 Car changeover time in sec. < 10 Max. test weight in kg 50 Gedpfx Afstql H Asijuh Temperature constancy over time in K ± 1 Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load in kW approx. 16.6 Condenser chiller water-cooled Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Feed-through Ø in mm 125 Refrigerant: R404A/R23 Weight: 950 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: Gedpfewfdniox Afieuh 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 4034 Vötsch Temperature Cabinet VT 4034 Air-Cooled Refrigerant: Converted to R-452 A Internal dimensions: Height 750 mm, Depth 765 mm, Width 580 mm External dimensions: Height 1780 mm, Depth 1595 mm, Width 865 mm Temperature range: -40°C to +180°C Gjdpewd Hpajfx Afieuh Temperature deviation: temporal ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Heating 3.2 K/min Cooling 3.5 K/min Maximum load (evenly distributed across the surface) of the test chamber floor: 60 kg per insert: 30 kg Total load of the grate supports: 80 kg Test chamber lighting: 24 V halogen bulb 50W Rated voltage: 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Fuse provided by the customer: 16 A slow-blow Refrigerant: R-452A Weight: 490 kg / 335 liters For your safety, the following information! The following steps are carried out on our chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Gsdpfxsk Scxmj Afijuh Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Feedthroughs: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Guedpem Tvzcefx Afijh Weight: approx. 720 kg Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the Godpforak Rmsx Afieuh all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm (refrigerant converted to R-452A) Test chamber capacity: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Data for operation: Test room lighting Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A Rated power 7.8 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1m from the front. 1m height 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.