Climate test chamber Temperature test

Vötsch VCS 4100

Condition: excellent (used), Memmert Type: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber from the manufacturer Memmert, model CTC 256. The unit originates from professional use and is ideally suited for laboratories, industry, research, development as well as quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climatic conditions. It enables both cooling and heating processes and – in this configuration – humidity control. This makes the unit perfect for material testing, aging tests, climatic stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time sequences can be set. The forced air circulation system ensures uniform temperature distribution in the chamber interior. Via the available interfaces, measurement data can be documented and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity control Electronic controller with programmable function Forced air system for even temperature distribution Internal protocol memory USB and Ethernet interface Additional 230 V socket Feed-through (side) Water container system (humidification/condensate) Mobile on castors Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Iiodpfx Aboy D Ni Aonof Weight: approx. 300–350 kg Condition: used Scope of delivery: (see photo) Memmert CTC 256 climate test chamber Removable shelves Water canister Documents Delivery as shown (Specifications and technical data are subject to change and error!) If you have any further questions, we would be happy to assist you by phone.

Condition: excellent (used), ESPEC Climate Testing Chamber PL-3KPH Device Data Manufacturer: ESPEC Type: PL-3KPH Design: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from ESPEC. Suitable for temperature and humidity testing. Used in research, development, and quality assurance. Operating Status Display: STOP / ready for operation. Technical Data Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A Air-cooled (no external water connection required) Weight approx. 350 kg Equipment Touchscreen control panel Program and constant operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable gland Overheating protection Hour meter Industrial design Scope of supply ESPEC Climate Testing Chamber PL-3KPH Scope of supply as shown in the images Service before delivery (optional) Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Condition see images. Note Loading and transport can be arranged upon request. Subject to changes and prior sale. Iijdpfx Ajy H H Iusbnef If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Vötsch VC³ 4018 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine type: Climate testing chamber / Temperature testing chamber Design: Air-cooled Test chamber volume: approx. 190 liters For sale is a used climate testing chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Iisdpfx Abszc Ht Ienef Technical data: Temperature range: -42 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation, temperature operation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation (time) in climate operation: ± 0.1 to ± 0.3 K Temperature homogeneity (spatial) in climate operation: ± 0.5 to ± 1 K Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation, climate operation: approx. 400 W Test chamber dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Cabinet dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant quantity: 2.50 kg Max. condensation pressure: 22.5 bar g Max. evaporating pressure: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Test chamber lighting: Halogen, 2 x 24 V / 50 W Equipment Touch panel operation Viewing window in the door Stainless steel test chamber Test chamber lighting Side openings Shelves / Internal equipment as shown in the pictures Documentation / Operating manual Additional accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures Inspection possible by appointment Safety note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown in the pictures. Subject to change and errors in technical data as well as prior sale.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber air-cooled Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Machine Type: Climate Chamber / Temperature Chamber Test chamber volume: approx. 335 liters For sale is a used Vötsch VC 4034 climate chamber from Vötsch Industrietechnik GmbH. The air-cooled temperature and climate chamber is suitable for professional temperature and climate tests, environmental simulations, material tests, and development and stress tests. With a temperature range of -40 °C to +180 °C and a humidity range of 10 to 98 % RH, the device offers optimal conditions for reproducible test sequences in research, development, quality assurance, and industry. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 × 765 × 750 mm (W × D × H) External dimensions: approx. 780 × 1,758 × 1,800 mm (W × D × H) Weight: approx. 515 kg net Temperature range: -40 °C to +180 °C Temperature change (heating): approx. 3.2 K/min Temperature change (cooling): approx. 3.5 K/min Temperature deviation: ±0.1 to ±0.5 K Temperature homogeneity: ±0.5 to ±1.5 K Iedpfxozng Uns Abneif Humidity range: 10 to 98 % RH Temperature deviation in climate operation: ±0.1 to ±0.3 K Temperature homogeneity in climate operation: ±0.5 to ±1.0 K Mains connection: 3/N/PE AC 400 V +10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel operation Stainless steel test chamber Viewing window in the door Test chamber lighting Side access Insert grid Air-cooled system Documentation / Operating manual Accessories as shown in the pictures Application areas: Temperature tests Climate tests Environmental simulations Material tests Electronics tests Quality assurance Research and development Development and stress tests Condition: Used The climate chamber is in used condition. The optical condition corresponds to its age and can be seen in the pictures. Scope of delivery: Vötsch VC 4034 climate chamber Insert grid Control panel / Controller Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the offer. Shipping by freight forwarder or self-collection possible by arrangement. Subject to change, errors and prior sale.

Year of construction: 2003, condition: used, 2 units available Dimensions: internal 320 x 270 x 400 (h) mm Dimensions: external 920 x 800 x 600 (h) mm Temperature chamber approx. 35 liters Temperature range: -70°C to +180°C Tube port: 85 mm Mains voltage: 230V +6/-10% 1/N 50Hz Rated current: 10A Rated power: 2 KW Iedpfx Aexyzvdobnsif RS232 Type: VT 7004

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components Ijdpfx Ajziizgobnsif 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Iedoziixrepfx Abneif Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A Iiedpfx Abszu Nxionjf For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) Iiedpfxjzh Ht Ro Abnof (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Vötsch VC 4060 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 600 liters Control System: S!MCON / 32 Cooling: water-cooled Refrigerant: R452A For sale is a used climate testing chamber from Vötsch. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical Data Test Chamber Dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing Dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature Range: -40 °C to +180 °C Iiedpfszf E E Tex Abnof Temperature Change Rate (Heating): approx. 4.0 K/min Temperature Change Rate (Cooling): approx. 3.0 K/min Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Deviation (Spatial): ±0.5 to ±2 K Temperature Gradient: approx. 1 to 4 K Climate Range (Temperature): -10 °C to +95 °C Humidity Range: 10 % to 98 % RH Humidity Deviation: ±0.1 to ±3 % RH Temperature Deviation (Climate Operation, Time): ±0.1 to ±0.3 K Temperature Deviation (Climate Operation, Spatial): ±0.5 to ±1.0 K Temperature Gradient (Climate Operation): approx. 1 to 2 K Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 7.8 kW Rated Current: 15.0 A Fuse: 16 A slow-blow, on-site 1 cable entry Ø 50 mm installed on the left 1 cable entry Ø 125 mm installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 control system Touch panel operation Interior made of stainless steel Test chamber lighting Side cable entries Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Application Areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Supply 1x Vötsch VC 4060 Climate Testing Chamber Documentation / operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Note: The unit has been converted to use R452A refrigerant. Scope of supply as pictured. Subject to changes and errors in the technical data, as well as prior sale.