Used Bulk feeders / bulk conveying equipment for sale (49)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DMN-WESTINGHOUSE PTD plug-type deflectors are specially designed for conveying powder and pellets with minimal degradation in pneumatic conveying systems. PTD plug type baffle is used in chemical, pharmaceutical, plastic, food and other related industries. The smooth passage of products is guaranteed by precision machining, good sealing and completely unobstructed passage. The user-friendly, foolproof design enables quick in-situ internal inspection, cleaning and replacement of seals if necessary. The PTD design complies with all applicable workplace safety legislation. Consequently, there are no moving parts on the outside. Lodpfxjmgb Hhe Ab Uehn Pressure up to 3 bar g with static seals PTD 80 Aluminum housing, tube stainless steel Ø 76.1 x 2.0 mm Pneumatic operation 5/2 with two-way valve 2 coils 24 V DC With 2 inductive limit switches

Condition: ready for operation (used), K-tron T35 twin screw volumetric powder feeder with K-tron controller and one set of powder augers. Lhedpfx Absr Elk Rj Uen

Condition: new, Year of construction: 2024, Conveyor belt: hydraulic folding in and out Scraper: front and rear scraper Conveyor belt length: 25.000 mm Engine: Caterpillar 4.4 Fixid Speed Engine 133 HP Crawler track: floor plates 400 mm Discharge height 22,5° / 27,5°: 8.8200 / 11.000 mm Lhjdpfx Aboikqxte Usn Conveyor belt width: 1.200 mm Feed hopper: Capacity 8 m³

Condition: used, Step Conveyor, Step Lift Conveyor KÖBERLEIN & SEIGERT Type A 400 / 2000 Feeding technology, feeding system, incline conveyor, angled conveyor, steep incline conveyor Serial No. Year of manufacture 2003 Slider width 400 mm Slider thickness 40 mm Conveying steps 10 units Transfer height at incline conveyor 2200 mm Transfer height lateral at the feeder 1800 mm Filling height 750 mm Lhsdpjtqwryefx Ab Ujn Conveying angle 75° Motor power 1.5 kW Motor speed 1450 rpm Power supply 400 Volt, 50 Hz - Low-wear sliders - Electromechanical drive - Counter-rotating slider system - Driven by three-phase motor - 4 height-adjustable feet Required space L x W x H 2000 x 1600 x 2500 mm Weight approx. 1400 kg Good condition

Condition: good (used), Year of construction: 2000, was used to transport wood chips from the chipper. Lodpfxjulflas Ab Ujhn

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Lhodoxfg A Tepfx Ab Uen Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. FEATURES OF THE ROTOVID 135° BOX TIPPER: - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: good (used), Offer 24083 Lhsdpfx Aber Hn Daj Uon Technical data: - Capacity 300 L - Load capacity up to 750 kg - Entry pockets for forklift trucks - Tipping function - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg

Condition: excellent (used), KMG stainless steel vibrating conveyor. Fully working. Dimensions 15 m long x 400 mm wide with stainless steel cover. Lhsdper E Dg Sjfx Ab Ujn

Condition: new, Year of construction: 2025, operating hours: 8 h, functionality: fully functional, conveyor belt width: 900 mm, conveyor belt length: 18,320 mm, discharge height: 8,320 mm, motor manufacturer: Caterpillar, Belt length / width: 18,320 / 900 mm Cat C1.7 engine: output 36 kW at 2,800 rpm Conveying capacity: approx. 400 t/h Discharge height: 8,320 mm at 22.5° incline Lhedpfew Hccnex Ab Uen Belt: hydraulically retractable and extendable Height adjustment: hydraulic Remote control: wired remote Crawler undercarriage length: 1,800 mm with 400 mm track plate

Condition: used, Year of construction: 2006, functionality: fully functional, 2 rotary valve dosing valves Manufacturer: Torex Type: RV20 Inlet/Outlet Size: 300 x 300 mm Overall Height: 455 mm Sealing strips made of rubber Bolted plastic lining of individual chambers for improved discharge. Function tested! Bearings re-lubricable from outside. Lhsdpfexd Duksx Ab Usn Last application: dosing of hydrated lime Drive power: 1.5 kW Speed: 30.9 rpm

Condition: new, Octabin emptying station. New and used systems available. Lhedpjxdr Sqofx Ab Ujn

Condition: used, Conveyor Screw, Spiral Screw Conveyor WEISS Tube Screw Lhedpfew E Nxaex Ab Uen Inlet opening 315 x 150 mm Shaft inlet height 1130 mm Tube diameter 177 mm Conveyor screw diameter 150 mm Construction height (center of screw tube) approx. 810 mm Conveyor screw speed 1.9 - 15 rpm Screw tube wall thickness 2 mm Screw blade wall thickness 2 mm Screw pitch 130 mm Conveying length (inlet to outlet) 2250 mm Motor power 0.75 kW Mains connection 380 Volt, 50 Hz - Motorized SEW Eurodrive gear unit - Conveyor screw is 220 mm longer than the tube Dimensions (L x W x H) 395 x 45 x 125 cm Weight approx. 300 kg Good condition

Condition: ready for operation (used), A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible. Ljdpevnucqjfx Ab Ujhn

Condition: ready for operation (used), K-tron volumetric powder feeder with K-tron controller. Ledpfxsr Ell Ds Ab Uehn

Year of construction: 2017, condition: excellent (used), 4 screw conveyors for sale (price for 1 psc) 2 psc. 5.8 m lenght (1psc without connection; 1 psc (cut in half) need to weld). 2 psc. 7.3 m length Both conveyors are with original connection (1 conveyors made from 2 parts) Engine parameters in the photo If you have an questions on this, please do not hesitate to contact us. If you interesting for all of them we can do very good discount. Lhedpfx Aoibwfzob Uen

Condition: reconditioned (used), Year of construction: 2008, operating hours: 41,000 h, functionality: fully functional, clamping force: 550 kN, Horizontal injection moulding machine from Boy, model 55 A. Year of manufacture: 2008. Operating hours: 41,000. The machine is delivered fully reconditioned by our expert technical team and in optimal working condition. Technical Details OPERATING HOURS: 41,000 YEAR OF MANUFACTURE: 2008 CLAMPING FORCE: 550 kN MAX. DISTANCE BETWEEN PLATENS: 650 mm DISTANCE BETWEEN TIE BARS: 360x335 mm PLATEN DIMENSIONS: 565x540 mm SCREW DIAMETER: 38 mm INJECTION PRESSURE: 1,508 BAR Lhjdpfx Ajw Hqkgeb Uon INJECTION WEIGHT: 129.8 g INJECTION VOLUME: 136.1 cm³ MINIMUM/MAXIMUM MOULD HEIGHT: 250/650 mm

Condition: used, Stainless steel WAM screw conveyor Motor power 2.2 kW +/- 90 rpm Diameter 270 mm Screw flight length 4000 mm Equipped with stainless steel pneumatically operated butterfly valve Outlet diameter 270 mm (2x) Lodpfx Abew Aclhj Uohn See our other listings VMA Wekerom

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Lhedpfxji Huzxs Ab Ujn Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: ready for operation (used), Year of construction: 2013, A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024. Lhodpfeuxdhhjx Ab Ujn

Condition: ready for operation (used), Gericke single screw gravimetric feeder with a stainless steel frame. It was used to dose powder. Capacity is up to 60kg/hour. Ljdor Elp Sopfx Ab Uehn

Condition: used, 10-meter conveyor belt, width 0.55 m, inclination angle adjustable hydraulically. Lhodewz Nu Tspfx Ab Usn

Year of construction: 2022, condition: as good as new (ex-display), Log cleaner Disc screen, disc cleaner for cleaning and sorting firewood. Fire Wood Cleaner Woodsifter Ljdjci U I Nopfx Ab Ujhn

Condition: used, Year of construction: 1999, Van Beek screw conveyor stainless steel Type: KR200 Motor power 1.5kW 117 rpm Fully stainless steel Equipped with pneumatic valve at inlet Lhedpow Aaw Iofx Ab Uen Inlet and outlet diameter 200mm Screw length 2600mm Discharge height +/- 2100mm Fitted with a cleaning hatch at the bottom See our other advertisements VMA Wekerom

Condition: ready for operation (used), Twin screw gravimetric powder feeder with K-tron controller. Lodjr Elkbepfx Ab Ushn The listing is only for the gravimetric feeder. It comes with one set of augers.

Condition: ready for operation (used), Feed Rates (mid-rate FEEDER) kg/h [lb/h]40-40'000 [88-88'000]dm3/h [ft3/h]20-80'000 [0.7-2'800] Lhsdpfx Abju Ezlwo Uon In good working condition, ready to be used.