Used Profile Knife Grinder for sale (8,368)

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other Csdo Aguv Eepfx Aiieri * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: used, amplification -fold 50 fach diameter 350 mm workpiece height max. 100 mm digital readout 2 Achsen table-size 320 x 150 mm travel -x axis 200 mm travel -y axis 100 mm travel -z axis 100 mm voltage 230 V weight of the machine ca. 115 kg dimensions of the machine ca. 0,50 x 0,80 x 1,00 m - Serial-No.: 5FPA072 Credpfxs Ah Iddo Aiioi - With 50x magnification lens - Transmitted and reflected light projection

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of any bankruptcy claims: Universal profiling steel shear with hole punch, Mubea Type KBL 11 N Year of manufacture 1978 Pressing force 35 tons Reach 320 mm Punching round holes up to 33 mm in diameter Cutting square sections up to 30 x 30 mm Cutting flat steel 100 x 10 mm Cutting angle iron 130 x 13 mm Cutting T-profiles 60 x 8 mm Various hole punches Weight 2 tons Credpfx As Aa Iqloiioi Price: EUR 1,750.00 plus VAT, ex works.

Condition: excellent (used), All stainless steel Mixer Grinder Cedewwkk Ispfx Aiisri Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order

Condition: used, Year of construction: 2000, We offer used Nikon V-12 profile projector, year of construction 2000. Manufacturer: Nikon Model: V-12 Serial number: 277120 Crjdpfxjz Tdmdo Aiisi Country of manufacture: Japan Objective magnification: 5x, 10x, 20x, 50 x, 100x, 200x Profile projector stand and various spare parts included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Used Weinig Rondamat 960 PowerLock Grinding Machine | Rehomy Year of construction: 2009 WEINIG RONDAMAT 960 with Powerlock HSK Machine with following options: Crode Ahyz Tjpfx Aiiei OP02 OPTIONSPAKET -2- COMFORT OPTIONSPAKET -8- HSK POWERLOCK TOOLING

Year of construction: 1977, condition: used, Weight: approx. 3.5t, an on-site inspection is possible. Cedpo Agwqhofx Aiiori

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, pipe diameter (max.): 30 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, HUVEMA MIP30 Profile bending machine, pipe bending machine 30mm ct2437 For sale in excellent condition HUVEMA MIP30 profile bending machine, pipe bending machine Manufacturer: HUVEMA MIP 30 Type: MIP 30 Year of manufacture: 2013 Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Credpezq Sqtjfx Aiioi Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch, with emergency stop Standard bending set Weight: approx. 200 kg Dimensions: W 650 x H 1350 x D:580 mm

Condition: used, WMW nail grinding machine. Grinds nails of sizes 4, 6, 8, and 10. Grinding diameter: 120 mm, grinding length: 1000 mm. Cjdpj Agvzdjfx Aiiori In excellent condition.

Condition: good (used), Year of construction: 2009, In good technical condition and fully functional. Year of manufacture: 2009 Power consumption according to documentation: 170 kW Dimensions (m): 11.2 x 1.8 x 2.9 Magnet (mm): 6510 x 600 Crodpfo Ahm Sbex Aiiei Motor power and diameter of the grinding head: 150 kW, diameter 800 mm.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Credpfx Aijz S Ufbsioi Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, MBO Z2 is a fully mobile, independent knife folding unit mounted on a height-adjustable wheeled chassis. It is designed to perform an additional perpendicular fold on sheets coming from buckle folders, stitchers, or mailing lines. • 180° Rotating Knife Mechanism: Allows the knife unit to fold either upwards or downwards depending on the layout and sheet direction. • FW (Fenster-Weiche) Integration: Equipped with the synchronization interface required to communicate with automated gatefold (window fold) plates, ensuring precise timing and collision-free sheet processing. Crjds Ahh Tzepfx Aiisi • Mobility: Independent drive and control system allowing easy pairing with multiple finishing lines. 2. Technical Specifications Parameter Specifications Infeed Length 80 mm – 320 mm Mechanical Speed Variable, 30 – 160 m/min Maximum Output Up to 15,000 cycles per hour Maximum Product Thickness Up to 6 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 13,617 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 150 mm, overall weight: 4,700 kg, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 470 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 640 mm, grinding spindle motor power: 7,000 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Basic Codpfj Ah Sycox Aiisri TECHNICAL CHARACTERISTICS: Year of manufacturing : 2018 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 3 R2 Colour touch screen: 19 ["] Number of axes: 5 Stroke X axis: 470 [mm] Stroke Y axis: 330 [mm] Stroke Z axis: 640 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght: end face grinding: 280 [mm] Max. grinding diameter: 320 [mm] Max. grinding diameter with automated work table: 290 [mm] Grinding spindle attachment: NCT Grinding spindle diameter: 70 [mm] Grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 7 [kW] Max. diameter grinding wheel: 150 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 13617 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Lubrication tank capacity: 350 [l] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4700 [Kg] ADDITIONAL EQUIPMENT: Calibration ball: automatic calibration of the X, Y and Z axes. RENISHAW LP2 part probe CO2 fire suppression system (to be inspected by a qualified organization at the buyer's expense) LTA oil mist extraction system, model EC 120-X-2-H (year 2023) Paper belt coolant filtration system 3-color signal tower light "ECO LOADER" automatic tool loader with its gripper system x1 pallet – Ø6 mm x1 pallet – Ø8 mm x1 pallet – Ø10 mm x1 pallet – Ø12 mm x1 pallet – Ø16 mm x1 NANN collet holder – Ref. 2.7400.2.003.010 – Collet type 3718 E x1 NANN collet holder – Ref. 2.7400.2.002.010 – Collet type 3409 E x1 SCHAUBLIN collet holder – Ref. 68-5728 – Collet type W20 x1 extended-nose collet, type 3409 E – Ø4.5 mm x1 extended-nose collet, type 3409 E – Ø5 mm x2 extended-nose collets, type 3409 E – Ø6 mm x3 extended-nose collets, type 3409 E – Ø8 mm x1 extended-nose collet, type 3409 E – Ø10 mm x1 extended-nose collet, type 3409 E – Ø12 mm x1 extended-nose collet, type 3409 E – Ø14 mm x1 extended-nose collet, type 3409 E – Ø18 mm x2 extended-nose collets, type 3409 E – Ø20 mm x1 collet, type 3409 E – Ø8 mm x1 collet, type 3409 E – Ø10 mm x2 collets, type 3409 E – Ø12 mm x1 collet, type 3409 E – Ø16 mm x5 drawbars for various types of collets x1 drawbar service wrench x2 ISO50 tool holders x2 sleeves (unidentified references) x1 clamping bell x1 set of "ECO LOADER" grippers for tools with shank diameters from Ø6 to Ø16 mm x1 set of "ECO LOADER" grippers for tools with Ø32 mm shanks x17 grinding wheel arbors (various lengths) x102 spacers for grinding wheel arbors x1 WALTER ISO50 calibration arbor x1 WALTER NCT calibration disc x1 machine parameter backup on USB flash drive x1 WALTER operator's manual (in French) x1 ToolStudio programming manual (in French) x1 WALTER electrical wiring diagrams manual x1 LTA electrical wiring diagrams manual x1 RENISHAW LP2 manual * The collet holder shown in the pictures, as well as the Ø16 mm collet are not included with the machine Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Manufacturer: Koppens Model: AutoMince200 Year: 1997 Condition: Used Serial Number: 361/124 Stock Number: 3465 Hole plate diameter: 200 mm Capacity: 1.5 - 2.5 t/h frozen blocks Hopper: 300 litre Infeed height: 1950 mm Outfeed height: 880 mm Power: 3 x 400V, 50Hz, 74kW Dimensions: 2550 x 2200 x 2900 mm Weight: 2700 kg Cedpfx Aie Ah R Tusisri Grinder for frozen blocks and/or fresh meat with lifter for 200L tote bins. Safety cover over grinding head and inspection platform on the side of the machine.

Condition: good (used), Year of construction: 2004, max. grinding diameter 230 mm grinding length 5x9 / 19.05x27,94 mm workpiece length 65 mm control GE Fanuc Series 160i-M weight of the machine ca. 7,7 t Crodpfo Ahdt Nex Aiioi dimensions of the machine ca. 3,8x2,6x2,3 m

Condition: used, Year of construction: 2001, functionality: fully functional, X / Y / Z / B / C axes X / Y / Z axis travels 360 / 240 / 360 mm X / Y / Z axis rapid traverse rate 10,000 mm/min Grinding spindle speed 1000–9000 min-1 Maximum grinding wheel diameter 160 mm Grinding spindle drive motor 4 kW at 4000 min-1 Grinding spindle mount STRAUSAK taper 1:5 Maximum grinding spindle torque 7 Nm Workpiece spindle mount ISO 50 Crsdpjz Tv Dhofx Aiiji Center height 125 mm B axis: rotation range 470° B axis: maximum rapid traverse rate 4000°/min C axis: rotation range continuous C axis: maximum angular velocity 14,400°/min Smallest data input unit X / Y / Z 0.001 mm Smallest data input unit B / C 0.001° Connection, weight and dimensions Connected power 12 kW Electrical connection 3 × 400 V / 50 Hz Equipment and scope of delivery Loading device Additional accessories included as shown in the photos Loading device and additional accessories included as shown in the photos.

Condition: good (used), Year of construction: 1980, Grinding machine with an adjustable clamping bar, up to a maximum of 1200 mm. Maximum workpiece thickness: 30 mm. Crjdpfxozczlrj Aiioi

Condition: good (used), Year of construction: 1993, In good technical condition and fully functional. Year of manufacture: 1993. Engine power and diameter of the grinding head: Ø 1000 mm Credpfx Ais Ahm Hwsiji Dimensions (m): 7.5 x 3.1 x 3.1 Power consumption according to documentation: 120 kW Magnet (mm): 3000 x 950

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Crods Ahgraspfx Aiiei Passage height: max. 100 - 200 mm Passage width: max. 450 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0.5 - 4.0 m/min., stage 2: 1.0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: used, The Reckmann LM 16 profile grinding machine grinds profiles on wooden workpieces for woodworking. It is used to machine workpieces with profiled surfaces. The profile is transferred to the workpiece by means of feed, an oscillating grinding block and a swivelling holder Technical data: - Workpiece width: max. ~ 120 mm - Workpiece height: max. ~ 80 mm Codpfj Agf Dwox Aiijri - Grinding motor: 0.37 kW

Condition: used, total width: 1,450 mm, total length: 6,550 mm, total height: 1,300 mm, Colour: Green Empty weight: 3.000 kg Csdj Adza Uspfx Aiisri - Drive system: Conventional - Number of axes [pcs]: 2 - X-axis travel [mm]: 3250 - Y-axis travel [mm]: 300 - Table width [mm]: 3750 - Table depth [mm]: 400 - Max. grinding wheel diameter [mm]: 355 - Options: External cooling, Knife Sharpener - Transport dimensions: 6550mm x 1450mm x 1300mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Working width: 300mm Working height: 2.5-150mm 4 sanding units 2x lower unit, 2x 5.5kW, rubber sanding pads 2x upper unit, 2x 5.5kW, rubber sanding pads Sweeping brush (top and bottom) Adjustable feed rate via inverter, 4-16 m/min Electric height adjustment for sanding CE certification Credpfoy Sxxvjx Aiioi Year of manufacture: 2009

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). Crjdowpd Tyepfx Aiiei The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Crjdoxc N Rhspfx Aiisi Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Year of construction: 2013, operating hours: 6,044 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040693, - Year 2013 - Work hours: 6.044 uur - Lenght: 7,6 m • 4-axis machining (X/Y/Z and A), with a tilting range of 0–180°. • HSD milling spindle, 24,000 rpm, with HSK-63F tool interface. • Automatic tool magazine with 8 positions. • Machining enclosure that moves along with the gantry. • Control cabinet with an integrated cooling unit. • Minimum-quantity lubrication (oil mist) for the tool. Clamping and measuring • 8 pneumatic profile clamps mounted on motorized carriages, each with its own cable carrier. Since 2021, positions are entered manually. • Plastic clamping jaws . • Length-measuring system with a measuring plate and reference stop. Operation and safety • Mobile control console featuring a touchscreen, keyboard, and emergency stop, plus a handheld remote control on a cable. • Datalogic Gryphon GM4200 barcode scanner with charging station (2025). • Push-buttons for releasing the clamps (replaced in 2025). • 2 SICK light curtains, including foot pedals and signal lights. • Safety fencing around the machine: 13 panels and 6 posts. Software • EluCam control system. • eluCad/elusoft with CodeMeter license modules: 5ax, ncx, spm, and dgx (4 licenses). Tooling Codpfx Aisz Eqxcjijri • 7 HSK-63F tool holders (with tools) in the magazine, plus 3 additional loose holders. • Approx. 30 milling cutters and drill bits, approx. 14 collets, a mounting block, a collet wrench, and a device for inserting and removing collets. • Spare clamping jaws, spare barcode stickers, and fuses.