Used Probe for sale (1,400)

Year of construction: 2014, condition: ready for operation (used), A CNC vertical milling machine Haas is available. Travel X/Y/Z: 762mm/406mm/508mm, feed rate: 16.5m/min, rapid traverse: 24.4m/min, table dimensions X/Y: 914mm/356mm, max. table load: 1361kg, tool stations: 24, tool holder: SK40, spindle speed: 15000rpm, power: 5kW/7kW, torque: 63Nm/88Nm. Machine dimensions X/Y/Z: approx. 2500mm/2350mm/2550mm, weight: approx. 3600kg, operating hours: approx. 15700h. Including full enclosure, 3D infrared probe Renishaw 40-2, zero point clamping system, vacuum unit and a set of tool holders. Documentation available. An on-site inspection is possible. Bcsdpfxsyfv Ndo Aafju

Condition: excellent (used), Year of construction: 2006, operating hours: 13,556 h, turning diameter over cross slide: 324 mm, turning length: 600 mm, turning diameter: 680 mm, spindle bore: 79 mm, rotational speed (max.): 5,000 rpm, Hello, I have for sale a DMG GILDEMEISTER CTX 420 v3 CNC lathe, year of manufacture 2006. The machine is in very good technical and visual condition, equipped with Sinumerik 840D ShopTurn control. Tool probe installed, all tools are driven on the C axis. The lathe is connected to power and can be inspected under working conditions. Only 13,500 working hours. Technical data: Working area: Bcodeyfuazepfx Aafeu * Maximum turning diameter: 680 mm * Turning diameter over bed: 680 mm * Maximum turning diameter over cross slide: 324 mm * Maximum turning length: 600 mm * Spindle bore diameter: 79 mm * Maximum spindle speed: 5000 rpm * Tool measurement probe The lathe has only 13,500 operating hours.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06-00376, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 150 mm, control type: CNC control, TECHNICAL DETAILS Measuring range X-axis: 400 mm Measuring range Y-axis: 400 mm Measuring range Z-axis: 150 mm Measurement accuracy: Length measurement deviation up to approx. 1.5 µm MACHINE DETAILS Bodpoyft Tmefx Aafecu Control: CNC Software: WinWerth, version 8.40 or higher Tool holder / probe: Renishaw, MK 2 Probe system: Renishaw Probe Interface PI 200 Voltage: 230 V AC Frequency: 50 Hz Current consumption: max. 10 A EQUIPMENT Granite machine with measuring glass and cover CNC control with scope controller Renishaw probe (various probe inserts included) PC workstation User manuals (WinWerth) Calibration and test reports Folder with machine and measurement room documentation Software and calibration data carriers (CD/DVD) Control cabinet integrated, main switch available

Condition: excellent (used), Year of construction: 2021, operating hours: 7,237 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, torque: 64 Nm, controller manufacturer: Siemens, table load: 600 kg, rotational speed (max.): 10,000 rpm, overall weight: 5,600 kg, operating hours of spindle: 4,048 h, number of axes: 3, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in very good condition and has so far only been used for cutting M8 threads in aluminum. Therefore, the spindle load has also never been particularly high. Equipment: • Renishaw PP40 wireless workpiece probe • Tactile tool measurement system Bcsdpfx Aoyftzqoafou • Job Shop package for Siemens 828 D • Chip conveyor • Tool changer with 24 positions • Tool holder for SK 40 DIN69871 and pull stud DIN69872 • Table surface 850x650mm • Drive power 100% duty cycle 9 kW • Drive power 40% duty cycle 13 kW • Torque 43 Nm • Maximum torque 64 Nm • Rapid traverse X / Y / Z 24/24/24 m/min • Coolant spray gun

Condition: good (used), Year of construction: 2006, Technical details: X 1000 mm Y 1150 mm Z 895 mm 15.000 rpm, HSK 63, 92 places in tool changer, Touch probe will come, laser measuring system. Coolant thru spindle. Parts shown by hand not come. Parts shown by hand not come. Bcedpfxeych D Ue Aafeu

Condition: used, Year of construction: 1998, Technical details: x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm table surface area: 3.600 x 650 mm max. table load: 2.800 kg control: TNC 426 HEIDENHAIN turning speeds: 6.000 1/min tool change unit: 30 Pos. taper ISO: SK 50 rapid motion - x-axis: 30 m/min rapid motion - y-axis: 30 m/min rapid traverse Z-axis: 30 m/min spindle drive: 31 / 21,5 kW total power requirement: 45 kW dimensions of the machine ca.: 5,5 x 3,4 x 3 m weight of the machine ca.: 15,5 t 3-axis vertical machining-center, prepared for 4th axis (wire and plug), internal cooling device 40 bar, chip conveyor, el. handwheel HR 410, 3D-touch probe, direct measuring system, dividing wall, twin table machining, flush gun, table elevation 100mm, bed flushing, coolant of spindle (oil), approx. 53.000 switch on hours, 18.500 spindle hours Bedoychidjpfx Aafscu *

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Including 4th axe TSUDAKOMA . Cooling threw spindle 30 bar. Control Fanuc 0i-MD. Including probes. Axes ( X/ Y/ Z ) mm 1.000 / 550 / 500 Table 1.100 x 502 mm Table loading kg 700 Spindle revolutions 12.000 rpm Bodsycg Npopfx Aafjcu Spindle BT40 Number of tools 24 Machine dimensions mm 3.335 x 2.200 x 2.670 Weight kg 6.500 control - Fanuc 0i-MD

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2017, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. Bedpfox D Di Uox Aafocu • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 295 h, controller manufacturer: HAAS, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS UMC 1500 DUO was manufactured in 2021, featuring a high-speed 15,000 rpm spindle, Din 69871, and a 50+1 side-mounted tool changer. It includes internal cooling at 21 bars, chip conveyor, and full 5-axis capabilities for complex machining tasks. Air through and around spindle. Probe for workpiece measurement and tool setter. Consider the opportunity to buy this HAAS UMC 1500 DUO vertical machining centre. Contact us for more information about this machine. • Sidemonteret værktøjsveksler 50+1 • 21 bars indvendig køling (TSC) • Top afskærmning • Automatisk værktøjs- og emneudmåling (probing) Bcsdpjx D I Sgjfx Aafou • Automatisk kalibrering • Dynamic Work Offsets (DWO) • Ethernet interface • Haas Connect • Media Display • 1 GB programhukommelse • Finmasket filter til kølevand • Auxillary filter • Remote Jog håndhjul • Synkrongevindskæring (rigid tapping) • Programmerbar kølevandsdyse • High Speed Machining • Fuld 5-akset Additional equipment • Spåntransportør (chip conveyor)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Control Fanuc 0i-MF Plus, CNC controlled 5th axe TSUDAKOMA TN - 101. Probe Renishaw, tool holders. Axes 510 x 360 x 300 mm Table 600 x 360 mm Max. spindle revolutions 8 000 rpm Spindle BT-30 Number of tools in tool holder 20 Machine dimensions 2 700 x 1 600 x 2 310 mm Bjdpfx Aaeycgurefjcu Machine weight 2 000 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 41,795 h, functionality: fully functional, travel distance X-axis: 1,760 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840 D ShopMill, rotational speed (max.): 6,000 rpm, The sliding surface of the base carriage X/Y was renewed in 2022! TECHNICAL DETAILS Travel range X-axis: 1,760 mm Travel range Y-axis: 600 mm Bcsdpfx Ajyfriaeafeu Travel range Z-axis: 800 mm horizontal Travel range Z-axis: 770 mm vertical A-axis: ±100° Faceplate diameter: 520 mm Rapid traverse X/Y/Z: 40/40/30 m/min Number of controlled axes: 5 Spindle speed range: 30 - 6,000 rpm Drive power: 30 kW Torque: 143 Nm Tool holder: SK 40 Tool stations: 36 MACHINE DETAILS Control: Siemens 840 D ShopMill Dimensions & Weight Required floor space (L x W x H): 5.2 x 3.4 x 3.3 m Machine weight: 12,000 kg Operating hours: 41,795 h EQUIPMENT NC rotary table AXA RTA 4L-520 Manual tailstock, center height 280 mm Internal coolant supply (IKZ): 30 bar Chip conveyor, discharge left Integrated coolant tank 200 l Coolant tank 400 l 3D touch probe, Renishaw RMP 60 with RMI receiver Direct linear measurement system Heidenhain Hardened flat guides Counter-guides coated with sliding material (Turcite)

Condition: good (used), Year of construction: 2014, Mikron VCE 1000 pro, year of manufacture 2014, commissioned in 2015, Heidenhain TNC 620 control, travel X/Y/Z 1020/560/600 mm, 40-position tool changer, spindle speed up to 10,000 rpm, ISO 40 taper, internal coolant with belt filter, Renishaw TS - 27 tool measurement, Renishaw OMP 40 3D probe, table size 1000 x 560 mm, max. table load 1350 kg, machine with a total of 4500 spindle hours. Bcodoyfrgxopfx Aafou

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 426 / 430, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel distances X-axis: 1,000 mm Y-axis: 800 mm Z-axis: 500 mm The machine received a new spindle in 2021! Speed range: 18,000 rpm Tool holder: SK 40 Tool positions: 30 Bjdpfx Aoyfpc Djafecu Table size: 1,250 mm x 800 mm Max. table load: 1,200 kg MACHINE DETAILS Machine type: DMG DMC 100 V hidyn Control: Heidenhain TNC 426 / 430 Year of manufacture: 2000 New spindle: 2021 EQUIPMENT Chip conveyor Heidenhain TS 632 touch probe Blum laser tool breakage control

Condition: ready for operation (used), Year of construction: 2009, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Additional information • Dimensions of Machine (LxWxH): X = 3000 mm (table 3500 mm), Y = 600 mm, Z = 800 mm Horizontal • Rapid traverse: 48 m/min in the X, Y, and Z axes • Powered CNC rotary table for 3D machining • Tool magazine for 36 tools • Tool length max: 380 mm • 3D measuring probe with radio control and radio signal transmission • High-pressure cooling along and through the spindle (70 bar) • Coolant tank: 900 l • Automatic doors Bedpfjx D Rggox Aafscu

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis DMG MORI DMU 75 monoblock was manufactured in 2017. It features a Heidenhain TNC 640 3D control, a production package with a 40 bar/23 l/min, 600 l tank, and a Blum laser for in-workspace tool measurement. Ideal for complex machining tasks, this vertical machining center represents a significant asset for precision engineering. Contact us for more information about this machine. • Coolant/through‑spindle: Production package 40 bar, 23 l/min, 600 l tank • Washdown/coolant gun: pump 2 bar, 40 l/min • Air blow cooling device • Workpiece probing: Heidenhain infrared probe (SK40) • Tool measurement: Blum laser in working area • 3D quickSET • Electronic handwheel • Application Tuning Cycle (ATC) • Languages: Machine plates Hungarian; screen display German • Documentation: Manuals 1 & 2 (German); electrical schematic (German) • 3D data model Bedpfx Aex D Dkfjafjcu • DMG MORI Netservice (base package/client) • Packaging/logistics: Base machine and production package packed on floor with film; pickup ex‑works

Condition: good (used), Arctiko A/S Ultra Low Temperature Freezer ULUF 65.55 liters Capacity Low energy consumption, low noise, low heat dissipation. Insulated interior doors. Castors for easy movement. Door lock. Ergonomic loading. Heated door frame, heated vacuum valve. 100% HCFC/CFC free. Feed-through for external temperature sensors (11 mm diameter). Single compressor system (ULUF 15, 65, 125, 450, 550, 850) or double compressor system (ULUF 490, 590, 890, 750) for increased operational safety. Bjdsyfn N Aspfx Aafjcu Control functions: temperature graph, microprocessor controller with digital display. Approximately 72 hours of battery backup for alarms, logging and temperature display in the event of a power failure. Visual and acoustic alarms: adjustable high/low temperature alarm, power failure, probe or instrument failure, open door, remote alarm output, GSM alarm preparation. Prepared for the connection of 2 additional probes. Integrated data logger (software included). RS485/232 interface. Computer data readout from USB. Direct data download/upload from/to USB flash drive. Automatic operation in the event of a probe failure. Outdoor temperature display. All alerts are displayed with text (not just code). 3-level password-protected access. Battery level indicator. Integrated memory. Display text is available in multiple languages. Optional accessories: racks and boxes, CO2 emergency system, GSM alarm module, cryogenic gloves, water-cooled capacitors. 5-year compressor warranty. Description: External dimensions (W x D x H): 600 x 700 x 810 mm Internal dimensions (W x D x H): 360 x 468 x 320 mm Maximum temperature range: -40 – -86 °C Weight: 77 kg

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar Bsdjx D E Hbjpfx Aafecu • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,861 h, travel distance X-axis: 800 mm, travel distance Y-axis: 720 mm, spindle motor power: 2,000 W, This Datron M35 was manufactured in 2007. It features a Renishaw 3D probe and direct shank clamping with an additional replacement spindle. A clamping device in the front area enhances its functionality. The spindle is a water-cooled Jäger model, complete with a cooling unit. For more information about this machine, please reach out to us. • Spindle: Jäger water-cooled spindle • Cooling unit: included (for spindle) • Tool holding: direct shank clamping Additional equipment Bcedjx D D Ukopfx Aafju • Renishaw 3D probe • Additional replacement spindle • Clamping device in the front area • Installed software: Datron V7

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, A Keyence 3D measuring system is for sale in good, used condition, as shown in the pictures. Technical data: Bcedpfjx Himgex Aafou • Manufacturer: Keyence (Japan) • Model: XM-1500 (measuring system) • Measuring head: XM-T1000 • Year of manufacture: 2016 • With hand probe, adhesive plate • Measuring range: 300x250x150mm • Display unit: 1 µm • Angular resolution: 0.0001 ° • Max. workpiece weight: 25 kg • Condition: Used, functional The measuring machine was used until recently and is fully functional. Shipping costs by freight forwarder: approx. £100 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: good (used), Year of construction: 2015, measuring range Z-axis: 50 mm, feed length X-axis: 200 mm, travel distance Y-axis: 500 mm, A Mahr contour measuring station is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Mahr GmbH Göttingen • Model: XC-20 With feed device: PCV-200 • Measuring range: approx. 0.2 to 200 mm • Measuring range (in Z): approx. 50 mm • Includes 2x measuring probes: - CP probe arm 350-M/16/16/6.5 double tip - PCV/CD probe arm 350 With measuring stand: ST-500 • Height adjustment range: approx. 500 mm • Hard stone measuring plate: approx. 700x550 mm With MCP-21 hand-held control panel Includes Midrange Standard control system • Year of manufacture: 2015 • Condition: Used, functional The MarSurf XC 20 is considered the absolute top-of-the-line device for contour evaluation. The optimally coordinated device configuration offers the highest performance standards. Shipping costs by freight forwarder: approx. £110 You will receive an invoice with VAT shown separately. Bcsdpexpw Syjfx Aafsu Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: new, Nexturn SA32B with the following attachments: Bcjdpfx Aasvyzp Ijfou - Iemca Boss 338 bar feeder - Büchele SFB-100 high-pressure unit Maximum machining diameter: 12 / 20 / 32 mm Maximum machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for the machine supply and control at 200 V / 50 Hz, and chip conveyor designed for Nexturn machines with machine tank. Modular system, all driven tools by WTO, Made in Germany. Including long part extraction unit. Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and sub-spindle Main and sub-spindle collet type: standard Synchronously driven guide bush unit Guide bush type: standard Standard equipment tool holders Linear slides 5-position tool holder for 16x16mm shank tools 4 cross drilling units ER16 Drilling fixture for front / rear face machining, with 5 ER16 drilling spindles Sub-spindle for rear machining Rear machining with 4 machining stations ER16 Drive unit for tools for rear machining on 2 fixed and 2 driven stations Pneumatic workpiece ejector Workpiece ejection monitor Blow-out device for sub-spindle Workpiece receiver Workpiece conveyor for part removal Separate coolant tank with level and flow monitoring Machine prepared for high-pressure coolant systems (electrical and mechanical adaptation up to 100 bar) Coolant through sub-spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control functions in standard specification: 8 MB program storage Metric input Direct input of drawing dimensions 200 tool wear offsets Operating hours display Part counter Network connectivity Background machining Automatic power-off function Program execution controllable via handwheel High-speed skip function for probe use Spindle speed monitoring (G25 - G26) Thread turning with variable pitch (G34) Cylindrical thread cutting (G35 - G36) Tool radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and sub-spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation / phase control of main and sub-spindle (M56 - M57) 4 additional programmable M-codes

Condition: new, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder - Büchele SFB-100 high-pressure coolant unit Maximum machining diameter: 12 / 20 / 32 mm Maximum machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for power supply to the machine and control with 200 V / 50 Hz, and chip conveyor designed for Nexturn machines with machine tank Modular system, all driven tools are manufactured by WTO, Made in Germany includes long parts discharge unit Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and sub spindle Main and sub spindle collet type standard Synchronously driven guide bushing unit Guide bushing type: standard Standard equipment tool holder Linear slides 5-position tool holder for shank 16x16mm 4 cross drilling units ER16 Drilling unit for front/rear face machining with 5 drilling spindles ER16 Sub spindle for backworking Backworking with 4 machining stations ER16 Drive unit for backworking tools: 2 fixed stations and 2 driven stations Pneumatic workpiece ejection device Part ejection control Blow-off unit for sub spindle Workpiece receiver Workpiece conveyor for discharging workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through sub spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot Bcodpsvyzqfofx Aafju USB interface RJ-45 LAN interface RS 232 C interface Control features included in standard scope: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear offsets Operating hours display Workpiece counter Network connectivity Background machining Automatic power-off function Program execution via handwheel High-speed skip function for use of probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Helical thread cutting (G35 - G36) Cutter radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate transformation (G68.1 - G69.1) Multiple repeat cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and sub spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and sub spindle (M56 - M57) 4 additional free M codes

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE Bcjdpfx Aajwla Hnofsu LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3500 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3800 x 1000 mm HEAD: A/B AXIS AUTOMATIC ; MILLESIMAL POSITIONING ; ISO 50 ; 5000 rpm; 34 kW TOOL MAGAZINE: CHAIN-TYPE ; 40 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 35020 Kg OVERALL DIMENSIONS: 8760 x 4950 x 3780 mm ACCESSORIES: SWARF CONVEYOR ; Bcodpewla Hzjfx Aafsu LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: fanuc, controller model: 16i MA, table width: 1,000 mm, table height: 500 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, overall weight: 9,300 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 8,000 h, spindle nose: HSK 63A, number of slots in tool magazine: 25, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, High-speed, high-precision vertical machining centre of Japanese manufacture. Furthermore, equipped with the following OPTIONS: MARPOSS wireless 3D workpiece measuring probe, swarf/chip conveyor, high-pressure coolant through the spindle, extended coolant system: 12 nozzles, 100 l/min capacity, electrospindle: 20,000 rpm, 22 kW, HSK 63A taper, with dedicated chiller, tool magazine expanded to 25 positions, FANUC high-dynamic drives (Alpha 22 and Alpha 30), ballscrews cooled by a dedicated chiller, linear optical scales, tool setter (length and breakage detection), active tool load monitoring, ROTOCLEAR on the main door, Bcjdpfx Aoxryb Njafeu FANUC SUPER GI option (Geometric Intelligent Control), FANUC RISC option (Reduced Instruction Set Computer), FANUC NURBS option (Non Uniform B-Spline), FANUC DATA SERVER option (160Mb), FANUC ETHERNET network port option, serial RS 232 output.