Used Probe for sale (1,456)

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: 3D Coordinate Measuring Machine Machine Weight: approx. 2 t Travel Ranges X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 1,300 mm Working Areas Working area Y-axis: 175–1,210 mm Working area Z-axis: 0–810 mm Baseplate Size of baseplate: 1,500 × 800 × 120 mm Digital Display Digital display: Grundig 3-axis Digimess Dimensions of digital display: 235 × 80 × 130 mm Performance Data Total power consumption: 0.04 kW Dimensions Space requirement: approx. 2.0 × 1.5 × 1.63 m EQUIPMENT Finely scraped cast plate with 4 adjustable feet, 2,000 × 1,500 mm Approx. 20 different probing and measuring styli Stiefelmayer guide system “A” Gedpfxe Aa Np Nj Ah Eobw

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item promptly between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Gedps Ai Scvsfx Ah Eebw Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to column: 190–570 mm Rapid traverse rate: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied secondary positions: 85 mm Max. tool diameter with free secondary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vice shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel in X-axis: 960 mm Gjdpfx Ahs Ai Shle Eebw Travel in Y-axis: 380 mm Travel in Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle connection: ISO 40 Spindle speed: 100–6,000 rpm Ball screw, X and Y axes, diameter: 32 mm Ball screw, X and Y axes, pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vice shown in the photos is not included. External Reference: Schönichen - Lot 25

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Gbsdpfx Ao Afhr Tjh Ejw Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Travel range X-axis: 440 mm Travel range Y-axis: 500 mm Gbjdpj Afhtqofx Ah Esw Travel range Z-axis: 410 mm Max. workpiece weight: 227 kg Table height: 930 mm MACHINE DETAILS Last overhaul: 2025 Last calibration and maintenance: 09/09/2025 Calibration and measurement protocols: available Operating manual: available on CD Dimensions & Weight Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm Total weight: 293 kg Input voltage: 220 V Input current type: Alternating current (AC) EQUIPMENT PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable Renishaw MH20i measuring head with TP-ES probe system EM1 extension module, length: 70 mm TP20 SF probe module with standard probing force TP20 EF probe module with high probing force Functional HP computer Additional Renishaw Brown & Sharpe TP-ES measuring head, functional Several probe extensions Various probe tips The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 2 kg, Equipment: documentation/manual, RENISHAW OMP 60 3D probe, SK40 OMP60 probe – used Compact 3D probe The optical signal transmission allows for the direct setup and inspection of workpieces on the machine and the transmission of the signal. Possible applications for the probe system include medium and large machining centers; compatible with all optical receivers from Renishaw. Switching methods for the probe can be adjusted. Factory setting: Optical On/Optical Off. Probe stylus, l = 100 mm, Probe ball, Ø 5.0 – ruby ball Mount for OMI-2 receiver – interface Protective sleeve and connector for the cable from the receiving unit Diameter 60 mm Battery compartment Weight approx. 1.54 kg Operating manual for the OMP60 probe is available in printed form and on CD-ROM Made in UK RENISHAW OMI-2 transmitter/receiver OMM with connection cable Machine interface MI12 Honda Tool holder SK 40 Price negotiable Our asking price is €3,390 net, ex works, plus packaging costs. Subject to technical changes and errors. Gbedpfx Aheznk I Ss Eow Sale exclusively to countries within the EU.

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Bright high-resolution 5.5" monitor integrated into the handset Specifications: Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Godju Ul A Nspfx Ah Eobw Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread

Condition: new, functionality: fully functional, Equipment: documentation/manual, type plate available, New, unused ZEISS scanning probe set, comprising: ZEISS VAST XXT TL3. ZEISS VAST RDS head. Compatible with ZEISS PRISMO, ACCURA, CONTURA, and current-generation CMM platforms. Condition details: Gbjdpezuur Iefx Ah Eew New, never installed/used Complete accessory set as pictured

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun Gbsdjygx Hnspfx Ah Esw ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments Gjdpfoz Slmkox Ah Eobw

Condition: good (used), Year of construction: 2017, functionality: fully functional, Internal article number: 26106 Godpfs Ai D D Ejx Ah Esbw Contour measuring device Garant CM1 CNC Year of manufacture: 2017 Includes software, operating manual, two additional probe inserts, calibration standard. The device comes from an insolvency estate, is fully functional, in good condition and can be inspected while powered on.

Condition: excellent (used), Year of construction: 2021, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: 21-0153, travel distance X-axis: 6,150 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 140 rpm, total length: 3,350 mm, total height: 2,800 mm, table width: 570 mm, total width: 10,000 mm, table length: 6,510 mm, drilling capacity: 40 mm, table height: 45 mm, rotational speed (max.): 2,300 rpm, rotational speed (min.): 140 rpm, Equipment: documentation/manual, rotational speed infinitely variable, We would be happy to provide you with a video of the machine in operation upon request. We offer this used BAUER BOHRMAX Z60 drilling and milling machine, manufactured in 2021, for sale. Includes: Manual vise SPM 3 (total of 8 pieces) Manufacturer: Bauer Maschinenbau GmbH Type: BOHRMAX Z60 Year of manufacture: 2021 Serial number: 21-0153 Connection value: 11 kW The BAUER BOHRMAX Z 60 machine is in excellent condition and is equipped with all accessories. -Travel on the X-axis (longitudinal): 6,150 mm. -Stepless speed adjustment from 140 to 2,300 1/min Drilling capacity in structural steel: 3 to 40 mm -Tool holder SK 40 -Pneumatic tool clamping -Coolant system in the machine stand for the drilling tool -Table thickness: 45 mm -Access protection on the operator side by means of a light barrier -Chip tray -Automatic tool length measurement. -Handheld control unit -Running tool changer: -Swiveling angle drilling head: Gbedpe Ai Dh Hofx Ah Esw -Minimum quantity lubrication in addition to the standard coolant system. -3D probe SK 40: for measuring the workpiece zero point in X, Y, and Z -Chip conveyor Z 60: Length: 6,000 mm -Software extension for DXF data import -Virtual machines: Definition of up to eight virtual workspaces with their own zero points. -Software for drilling angled holes -License for one office workstation If you have any questions or require further information, please feel free to send us a message or call us. The machine can be picked up from March 1st, 2027.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 95,739 h, functionality: fully functional, machine/vehicle number: 15125250324, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 3,000 kg, overall weight: 22,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 38,229 h, coolant supply: 40 bar, spindle motor power: 48 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a DECKEL MAHO DMF 250 linear, manufactured in 2005, from our current production facility. Sale due to modernization of the machine park. The machine is operational, connected to power, and can be inspected and demonstrated in operation after prior arrangement at 84089 Aiglsbach. TECHNICAL DATA Gbjdpfx Ahs Aitphe Eew Manufacturer / Model: DECKEL MAHO DMF 250 linear Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Machine number: 15125250324 Travel ranges X / Y / Z: 2,500 / 920 / 820 mm Tool holder: SK50 Spindle speed: 10,000 min⁻¹ Tool magazine: 30 positions Internal cooling (IKZ): 40 bar Measuring probe: Heidenhain Max. table load: 3,000 kg Machine weight: approx. 22,000 kg OPERATING HOURS Total operating hours according to the recorded meter reading: approx. 95,739 h Spindle hours according to the recorded meter reading: approx. 38,229 h Motor spindle replaced after approx. 36,670 spindle hours; therefore, approx. 1,559 spindle hours since replacement, based on the meter reading. As the machine is in current operation, the hours may increase until the sale. EXTENSIVE OVERHAUL 2026 Documented net overhaul costs: approx. €61,200. - Motor spindle replaced - Y-axis: Linear guides / guide carriages and ball screw overhauled - Z-ball screw including bearing renewed - Geometry newly adjusted and measured - Current Renishaw ball bar measurement available Evidence of the overhaul measures and measurements is available. PRICE AND INSPECTION €99,900 net, negotiable, plus statutory VAT. Location: 84089 Aiglsbach. Inspection and demonstration under power after prior arrangement.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,020 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 680 mm, overall weight: 14,000 kg, Equipment: chip conveyor, documentation/manual, * Control system: Heidenhain 530 * 48-position tool changer, SK 40 * Internal coolant system, 20 bar * Renishaw probe with handwheel * Chip conveyor * Documentation Gbjdpe Ai Ttcjfx Ah Eow Delivery without clamping fixtures.

Condition: like new (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, Control: HAAS Table size: Ø 400 mm Max. table load: 227 kg X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm B-axis: +120° to -35° C-axis (Rotation): 360° Spindle taper: SK 40 / Inline direct drive Spindle speed: 10,000 rpm Godpfj Ai E E Dex Ah Eobw Drive power: 22.4 kW Tool capacity: 30+1 tools Tool holder type: SK40 Machine weight: approx. 5150 kg Dimensions (W x D x H): approx. 2950 x 3000 x 2700 mm Accessories, Equipment • Coolant system • Chip conveyor • Through-spindle coolant (TSC), 20 bar • RENISHAW OMP60 optical part-setting probe • RENISHAW TS27 tool setter • Documentation The machine is in near-mint condition and has barely been used. Under power in Hungary. Would you like me to adapt this translation into a professional sales listing format or modify any specific industry terms for an online machinery marketplace? Az AI-válaszokban előfordulhatnak hibák. További információ

Year of construction: 2004, condition: used, Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible. Gbodezzqcvjpfx Ah Ejw

Condition: good (used), Year of construction: 2010, operating hours: 44,200 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens, controller model: 840 D, table load: 600 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, operating hours of spindle: 22,700 h, coolant supply: 40 bar, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Manufacturer: DMG DECKEL MAHO Year: 2010 Machine Type: 5-Axis Milling-Turning Center General Information CNC Control: Siemens 840D sl Machine Weight: approx. 12,000 kg Travel and Axes X-Axis Travel: 600 mm Y-Axis Travel: 700 mm Z-Axis Travel: 600 mm B-Axis: −30° to +180° C-Axis: 360° Rapid Traverse X/Y/Z: 60 m/min Main Spindle Max. Spindle Speed: 12,000 rpm Milling-Turning Table Table Diameter: 700 mm Max. Table Load: 600 kg Milling Table Speed: 50 rpm Turning Table Speed: 1,200 rpm Gbsdo Ai Spwspfx Ah Eow Tool Magazine / Equipment Tool Capacity: 60 Tool Holder: HSK-A63 High-Pressure Coolant: 40 bar Tool Measurement: BLUM 3D Laser Workpiece Probe: TS 649

Condition: like new (used), Year of construction: 2023, operating hours: 140 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 14,000 rpm, operating hours of spindle: 45 h, spindle nose: BT40, number of slots in tool magazine: 60, Equipment: chip conveyor, CNC- milling center universal Universal CNC Machining Center Manufacturer: DMG MORI Model: DMU 50 2nd Complete Year of Manufacture: 2023 Control System: Celos with Siemens 840D sl Operate Technical Specifications: Travel Ranges: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm Main Spindle: Speed range – main spindle: 20 – 14,000 rpm Drive power – main spindle (100/40%): 20.3 / 14.5 kW Tool Changer: Tool holder: BT40 Number of tool positions: 60 pos. Feed rates: Rapid traverse (x/y/z): 30 m/min Gedpfxj Ain A Is Ah Ejbw Operating hours: approx. 140 h Spindle hours: approx. 45 h Technical Features & Accessories: - Rotary table, capable of simultaneous operations - Direct position measurement system in x, y, z, b, c - Internal coolant supply, 40 bar, consisting of: - Paper belt filter - 600-liter tank - Spindle rotary joint - Enclosure roof - Rotating viewing window - Rotary joint - Chip conveyor - Flushing gun for chip flushing - Coolant/blow-off air switch - Preparation for 3D quickSET - Infrared probe, Renishaw PP40 (if available) - Tool probe, Renishaw TS27R (if available) - Electronic handwheel (if available) Accessories, tools shown in the illustration, and clamping devices are included in the scope of delivery only if noted in the additional information.

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Port Probe Switch Gbsdjxt E Htopfx Ah Eow -Type: MPCQH0402 -Number: 7x Port Probe Switch available -Price: per piece -Dimensions: 240/145/H45 mm / 240/180/H50 mm -Weight: 1.2 kg / 1.4 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Selling price: 300,000 Euros Earliest possible pickup date: May 2027 Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of manufacture: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw Godpfx Ahjzxf Hke Ejbw IKZ: 70 bar Tool management GROB TM167 additional tool magazine Year of manufacture: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of manufacture: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The manufacturing cell is in good condition and has been in continuous production. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, no known defects are present. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection is possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can coordinate the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional, has only been used for light machining such as aluminium. Of particular note: Each of the two NC tables allows clamping of workpieces up to Ø1,100 mm – see drawing. A fixed milling table can also be mounted. A high-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Controller: Heidenhain iTNC 530 Machine on: 50,236 hours Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Gjdoyi Er Aepfx Ah Ejbw Tool changer: 52 positions on 2 chains NC rotary tables (2 pieces) Type: SKH-NC 7/T Table plate: Ø 630 mm Max. load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: IC coolant system with 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (inspection windows), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Transport and loading can be organized throughout Europe on request for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales – BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 2016, power: 67 kW (91.09 HP), input voltage: 400 V, type of input current: three-phase, temperature: 350 °C, overall weight: 1,300 kg, number of chambers: 4, number of shelf rows: 4, control type: manual, actuation type: electric, fuel type: electric, Electrical power Number of chambers: 4 Independent cooking chambers Maximum temperature: 350 °C 4 burners with steam generation Column-type loading system Heating via electric resistance elements iBAS electronic control system Hood + smoke extraction system Year: 2016 Individual controls per chamber 2 temperature probes per chamber Programmable cooking timer Adjustable additional cooking time Programmable automatic start SLEEP function for standby mode Audible end-of-cooking warning Doors with lift-up opening 2 halogen lamps per chamber Voltage: 400V Power: 67 kW Weight: 1300 kg Godpfxo Ai Enxs Ah Ejbw Key advantages 4 independent chambers for organizing multiple cooking processes with separate settings Individual electronic control on each tier Separate adjustment of vault and hearth temperatures Maximum temperature as specified by the manufacturer: 350 °C Two temperature probes per chamber for thermal control Programming of cooking time and additional duration SLEEP function for standby mode Programmable automatic start according to the functions of the ACTIVE system Audible warning at the end of cooking Lift-up doors with operating handles Double-layer thermal insulation with rock wool Frontal access to the resistance connections to facilitate certain maintenance operations

Condition: good (used), Year of construction: 2006, operating hours: 21,565 h, functionality: fully functional, machine/vehicle number: 107.37.00.165, total height: 2,700 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 7,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,697 h, spindle motor power: 10 W, number of spindles: 1, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Offered here is a CNC vertical 5-axis machining center from the manufacturer Mikron, featuring a workpiece pallet pool with 7 pallets. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 600 Vario Year of construction: 2006 Control system: Heidenhain iTNC 530 Technical data: Travel ranges X-Y-Z: 600x450x450 mm Godpfx Ae Aivkaeh Eebw Max. rapid traverse: 22 m/min Max. feed force X and Y axis: 5 kN Max. feed force Z axis: 7 kN Rotary table C-axis: 360° Swivel range A-axis: -115° to +30° Table surface: 450x450 mm Max. table load: 200 kg Magazine positions: 30, fixed coded positions Tool holder: ISO-B40 Max. tool length: 250 mm without taper Max. tool weight: 6 kg Tool diameter: 90 mm fully loaded / 130 mm partially loaded Spindle speed: 12,000 rpm Power: 15 kW at 44% duty cycle, 10 kW at 100% duty cycle Machine dimensions: 3300x2400x2700 mm (excluding pallet pool) Weight: 7,700 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Spindle oil cooler 1x Pallet pool with 7 work pallets 1x Renishaw measuring probe OMP60

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP Gbedpfx Aszbqx Soh Esw with 5 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y: 43 m/min, Z: 30 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power: 13 kW Speed: 12000 rpm Spindle taper: BT 40 Dual-arm tool changer: 30 tools Tool change time: 5.2 sec Blum measuring probe TC52 Oil mist extraction Coolant system Automatic central lubrication Vacuum monitor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, so the guide rails and spindle are in very good condition. Including 5 tool holders: 1 Weldon chuck, Ø16 1 collet chuck OZ DIN 6388, Ø 2-16 1 collet chuck OZ DIN 6388, Ø 6-25 1 milling cutter holder 1 short drill chuck, Ø 1-13 mm

Condition: like new (used), Year of construction: 2016, operating hours: 10,517 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 500 kg, total height: 3,000 mm, total length: 4,900 mm, total width: 3,100 mm, table width: 500 mm, table length: 500 mm, overall weight: 13,970 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 26 W, Year of construction: 2016 CNC controller: Mitsubishi M-730UM Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 880 C-axis degrees: 360º (0,001) Feed rates m/min: 70 Rapid traverse m/min: 70 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: 500x500 Gedpj Ai Dbrefx Ah Eobw Maximum workpiece size (D x H) mm: Ø800x1000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 37/26/22 Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 550 Max tool weight kg: 12 Tool-to-tool time s: 0.9 Chip-to-chip time s: 2.5 Equipment Chip conveyor Internal cooling lubricant supply Signal lamp Tool breakage probe Laser tool measurement for measuring tool length and diameter Heat compensator Helical interpolation Fast fixed cycles Machine running times Spindle Working: 10517 Rated power kVA: 59 Basic machine dimensions / weight Length mm: 4900 Width mm: 3100 Height mm: 3000 Weight kg: 13970