Used Pressure Cooker for sale (14,064)

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: WIPA, Radial fan pressure blower from friction disc friction washing system WTG75-15-500 Lrodpfjziz A Njx Aftjp -Type: Ø 600 mm -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm -Dimensions: 1000/800/H1100 mm -Weight: 343 kg

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Lsdpfx Asziz Avsftsrp -Pressure blower: Radial fan pressure blower -Type: Ø 420 mm -Motor: EMK 2.2 kW / 2915 rpm -Volume flow rate: m³/min -Inlet connection: Ø 150 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 420 x 40 mm -Dimensions: 650/560/H760 mm -Weight: 103 kg

Condition: used, GE Druck PACE5000 High-Precision Pressure Controller Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device Type: Modular High-Precision Pressure Controller / Pneumatic Pressure Controller Pneumatic Control Module: CM0-B-16G For sale is a used GE Druck PACE5000 High-Precision Pressure Controller. This modular pressure control system was developed for demanding calibration, testing, and automation tasks and is suitable for calibration laboratories, research, development, quality assurance, and industrial test benches. The device impresses with its high control accuracy, fast pressure regulation, and extensive communication interfaces. Technical Data Control Range: -1 to 70 bar(g) Maximum Allowable Working Pressure (MWP): 94 bar Accuracy: up to 0.001% of full scale (model-dependent) Long-Term Stability: up to 0.001% FS Dimensions (W × H × D): approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Pressure Control Modular pressure control system High pressure control speed Automatic pressure regulation Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Lrsdpfxeziyqrs Aftsp Display Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections Supply Output Vent Reference G1/8" connection Power Supply 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Equipment Pneumatic Control Module CM0-B-16G Color touch display Ethernet interface USB Host / USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pressure connections Power cable Accessories as shown in the pictures Application Areas Calibration laboratory Test benches Quality assurance Automotive industry Aerospace Mechanical engineering Metrology Research and development Automation technology Pressure sensor calibration Shipping Data Dimensions: approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Condition Used The device was last used in an industrial setting. Optical condition as shown in the pictures. Normal wear and tear due to age. Scope of Supply GE Druck PACE5000 Power cable Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 24050102129, total width: 2,000 mm, total length: 1,400 mm, total height: 3,000 mm, overall weight: 600 kg, water tank capacity: 250 l, working width: 1,200 mm, Front-loading wash system with automatic and manual operation. Temperature range in automatic mode: 0-80°C, in manual mode: 0-45°C. Washing table diameter: 120 cm. System made entirely of AISI 304 stainless steel. PLC control with a 10" touchscreen, air gun, steam extraction, filter system, etc. Inspection and test cleaning are possible. Lsdpfx Aezlqffjftsrp

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. The system features a chip screen and filter. Lrjdjzlp Ifepfx Aftjp In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Stainless steel AISI304, steam extraction, water level sensor.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 Ljdpfswc Ri Ijx Afterp 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection Lrjdpfx Aeupyw Esftsp The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" Lrsdpfxswc Rk Eo Aftep 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Lredpfx Afowc Afhotsp Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun Lodpfxezinzlj Afterp - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Lodpfx Aokt S S Neftsrp Availability: In stock Quantity: 1 piece Further information can be found on the nameplates. Feel free to contact us if you have any questions.

Condition: used, continuous grilling line all stainless steel bottom contact grilling + top hot air suitable for steam injection Lrodpsziaatsfx Aftep useful width conveyor 900 mm belt width 1.000 mm net length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system/hot water ± 60°C (operational supply) adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm new Teflon belt

Condition: excellent (used), Catalog number: 7996 TECHNICAL DATA - max. main blade diameter with scoring blade: 400mm - blade bore diameter: 30mm - max. cutting height: 120mm - main blade adjustable up/down + angle - blade guard - with a sizing carriage - cutting length on the carriage: 3200mm - cutting width with guide: 1270mm - with a side carriage - with a scoring blade Lrodpfx Aszh I Aysftjp - max. scoring blade diameter: 120mm - spindle diameter: 20mm - scoring blade motor: 0.75kW - main motor: 5.5kW - 2 types of rotational speeds: 4000, 6000 rpm - dust extraction nozzle diameter: 75mm, 100mm - table dimensions: 1060x640mm - table dimensions with extension and widening: 1660x1550mm - dimensions (L/W/H): 3350x3470x1400mm - weight: 770kg ADVANTAGES – clamping bar included – with table extension and widening – unpainted – used saw, very good condition Net price: 16,900 PLN Net price: 4,030 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 2014, machine/vehicle number: 3237006, Manufacturer: Formcook Model: PRoGRILL 1175 TFEF Year: 2014 Condition: Used Serial Number: 3237006 Stock Number: 3066 Lrodpfx Afjy Ib Tbstjp Belt width: 1100 mm Cooking length: 10000 mm Heating: thermal oil, 189kW + electric, 128kW Exhaust: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Water: 15,4 l/min for belt washer Power: 3 x 400V, 50Hz, 168kW Dimensions: 10000 x 2200 x 2450 mm

Condition: reconditioned (used), functionality: fully functional, operating pressure: 230 bar, empty load weight: 66 kg, fuel: super E10 95, warranty duration: 6 months, KARCHER HD 1050 B COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. The highly efficient Honda GX 390 combustion engine ensures stable operation even during prolonged use. With operating parameters of 230 bar and 930 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power: Combustion Engine: Honda GX 390 Discharge capacity [l/h]: 930 Operating pressure [bar]: 230 Maximum pressure [bar]: 250 Weight [kg]: 66 Dimensions (L x W x H) (mm): 1044 x 549 x 662 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance Lrodpfjzkulajx Aftop NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: good (used), Year of construction: 2007, operating hours: 9,953 h, functionality: fully functional, total width: 2,440 mm, total length: 7,150 mm, total height: 2,590 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 12,500 kg, rotational speed (max.): 1,700 rpm, water tank capacity: 1,600 l, empty load weight: 12,500 kg, power: 480 kW (652.62 HP), water pressure: 1,000 bar, cubic capacity: 15,874 cm³, pump capacity: 193 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Similar, but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Operating pressure: 1000 bar Lrodpfewz Ekqjx Aftjp Flow rate: 193 l/min Switching valve for 4 consumers, each with separately adjustable pressure. Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW With 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine With workshop and changing room. Dimensions LxWxH: approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Condition: refurbished (used), Year of construction: 2003, operating hours: 7,951 h, functionality: fully functional, total width: 2,450 mm, total length: 7,600 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 9,000 kg, rotational speed (max.): 2,100 rpm, empty load weight: 9,000 kg, year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 205 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit, Hammelmann HDP 402, housed in a WAB container. Similar to, but not a Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 402 PRESSURE STAGE 1: Operating pressure: 880 bar Lrjdpeipadxofx Aftjp Flow rate: 242 l/min PRESSURE STAGE 2: Operating pressure: 1000 bar Flow rate: 205 l/min Drive speed: 2100 rpm Plunger: d50 mm Drive power: 400 kW with a 442 kW Caterpillar C-15 2CPXL14.6ESK diesel engine with workshop and changing room. Dimensions L x W x H: approx. 7600 x 2450 mm Weight: approx. 9000 kg Year of manufacture: 2003 Operating hours: 7951 Condition: The high-pressure pump has been fitted with new valves. New batteries. In good used condition.

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, Lredjyrqrtopfx Aftjp automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: excellent (used), Panel saw HOLZ-HER Cut 70 6110 - used - PC control with optimization, scorer, automatic cut length detection, side pressing device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer Lredpfx Aoyu N Rgoftjp ----- Technical data ----- Cutting length: 3900 mm, Cutting width: 3100 mm, max. cutting height: 70 mm, Number of clamping devices: 6 pieces, Feed rate saw unit max.: 0-70 m/min., Feed rate width guide max.: 25/70 m/min., Motor power main saw: 11 kW, Motor power scorer: 1.1 kW, Saw blade main saw Ø: 350 mm, Saw blade scoring saw Ø: 180 mm, Extraction port Ø bottom: 120 mm, Extraction port Ø on the pressure beam: 3 x 120 mm, max. fuse rating: 35 A, Rated current of the largest consumer: 20.6 A Quality information: - Saw spindle newly bearinged - Scorer newly bearinged - complete basic inspection - complete basic cleaning - electrical system checked - ready for immediate use

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: VBM, Manometer 0-10 bar, unused, original packaging Lrsdpfx Ajyfmr Aoftop -Type: 1/BM 20 M 20x1.5 260 Ø -Item No.: 13301-B44-01 -Number: 9x pressure gauges available -Price: per piece -Cardboard dimensions: 310/310/H70 mm -Weight: 4.6 kg/piece

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester Lrodpfjyd S Rbsx Aftep -Manufacturer: TGL, Manometer 0-600 bar, unused, original packaging -Type: 1/BM 20/2 160 0-600 kg/cm² -Number: 20x pressure gauges available -Price: per piece -Cardboard dimensions: 200/200/H70 mm -Weight: 0.9 kg/pc.

Year of construction: 1999, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Reitz, Radialventilator -Type: MXE 100Engine power: 22 kW / 3000 rpm -Volume flow: 100 m³/min -Pressure increase: 1000 daPa -Connection input: Ø 275 mm -Connection: Ø 220 mm -Dimensions: 870/1220/H1210 mm -Weight: 370 kg Lredpfx Afevy Hu Aetsp

Condition: good (used), Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 1x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc. Lredpoiq Th Ssfx Aftsp

Condition: excellent (used), Pressure gauge, test pressure gauge, pressure gauge with Bourdon tube, pressure and temperature measurement technology, contact pressure gauge -Manufacturer: Richter, manometer pressure gauge with limit signal transmitter -Type: 0 to 6 bar -Limit signaller: Type M1 -Screw connection: see photos Lredpfx Aoiraxusftsp -Dimension: 170/135/H135 mm -Weight: 2.1 kg

Year of construction: 1994, condition: used, Pressure blower, radial fan, high pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: VEB ILKA, radial fan extraction fan -Type: IRHMF160 / 2 see photo type plate -Engine power: 3.4 kW / 2900 rpm -Volume flow: 0.242 - 0.694 m³/s -Inlet: Ø 160 mm -Connection output: 250 x 160 mm -Fan wheel: Ø 500 mm -Dimensions: 780/490/H1030mm -Weight: 88kg Lodpfx Afeuncxieterp