Used Coolant Cleaning System for sale (44,878)

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water Transfer to the filter system is carried out on-site, air and foam-free. Temperature max.: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with consistent consistency The dirty liquid is fed via on-site lifting stations. The chips and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. Iedpfjzwccmsx Ahyobc The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharge of grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Volume max.: approx. 4.58 m3 Length: approx. 4,000 mm, incl. 70 mm stiffening Width: approx. 1,890 mm, incl. 140 mm stiffening Height: approx. 1,105 mm, incl. 100 mm bottom profile Neck height: approx. 2,300 mm Theoretical discharge volume max.: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without railing, without internal access rungs Volume max.: approx. 0.55 m3 51026ä

Condition: used, Bous Waschfix Cleaning and Degreasing System For sale is a professional, industrial parts cleaning system/washing system of the “Waschfix” type. This system is ideal for workshops, production facilities, or metalworking companies for the thorough cleaning, degreasing, and maintenance of components and workpieces. Iedpfx Ajz Rm U Sehysbc The system is robustly built and features an external, high-quality pump and stainless steel filter unit for cleaning the washing medium, as well as a clear and user-friendly control panel. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaning agents (pH value 7–11). Thanks to the integrated two-hand safety operation and the clear control panel, operation is absolutely safe and straightforward. Technical data: Manufacturer: Bous Type: Waschfix Manufacturing number: 18251 / 2001 Capacity (filling volume): 120 liters Permissible cleaning agent: pH value 7 – 11 (neutral to alkaline) Maximum operating temperature: 70 °C (thermostat controlled) Heating power (electric): 6 kW Required compressed air connection: 6 bar (for the blowing function) Electrical connection: 230 / 400 V | 50 Hz Total power consumption: 16 A Net system weight: approx. 450 kg Special equipment: Includes a robust base collection tray with skids (optimal for easy transport by pallet truck or forklift). Scope of delivery: Main washing chamber, control unit, separate pump and filter unit made of stainless steel, collection tray. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Iodpfozixy Ssx Ahyobc Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and post-processing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to a maximum of 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter dust extraction system Ijdpozklb Eefx Ahyebc Performance: 4 horizontal, high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine, specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, For sale is our Fisa 3-chamber cleaning system for aluminum die-casting tools. The sale includes the associated ABUS crane, as shown in the picture. Plus, there are 2 full containers of cleaning agent. Iodpez Rpnnjfx Ahyobc

Condition: used, We are offering for sale an ultrasonic cleaning system from the brand GAMMAT. If you have any further questions about the product or are interested in purchasing it, please do not hesitate to contact us. Isdpfsz S Nf Nex Ahyebc

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We are offering for sale our component cleaning system from Ziegener + Frick. The system is in like-new condition. Various loading frames are included. ION Clean cleaning table. Summary with AI: The IONClean cleaning table from Ziegener + Frick is a soundproof, turnkey stand-alone system for contactless and electrostatic surface cleaning of components. You can find an example video from the manufacturer under Videos. We will gladly answer any questions you may have about the system. Iodpfxoz Enr Tj Ahyjbc An inspection is possible by appointment. New price of the system: approximately €85,000.

Condition: excellent (used), Year of construction: 2004, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80 m Continuous washing systems from the manufacturer Hinst are designed to process high volumes of parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets with dimensions of 48.5 x 48.5 cm) on a transport system. An integrated roller conveyor or a slat belt automatically transports the parts into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they sequentially pass through different, separate treatment zones: * Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray manifold) to remove oils, greases, and chips. * Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. * Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts come out at the other end of the machine completely dry and clean. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater is cleaned via filter systems (to capture chips and dirt) and oil separators and then pumped directly back into the circuit to conserve resources. Ibjdpfeg Ipp Aox Ahyec This tunnel design (the system measures an impressive 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture 12.2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m incl. - 6 baskets: basket dimensions: 48.5 x 48.5 x H 26 cm - Roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Iedjzlh Aujpfx Ahyjbc Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: used, Bous Waschfix: Industrial Cleaning and Degreasing System This system is ideal for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaning agents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless draining of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Ibodpez Nwbmofx Ahyec Technical Data Manufacturer: BOUS Cleaning & Degreasing Systems Type / Model: WASCHFIX Year of Manufacture: 2006 Tank Capacity: 100 liters Operating Temperature: up to +70 °C Electrical Heating Power: 6 kW Compressed Air Connection: 6 bar (for blow-out function) Electrical Connection: 230 / 400 V Total Power Consumption: 17 A Control Voltage: 24 V DC / 50 Hz Net System Weight: approx. 500 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2010, functionality: unexamined, Offered is an emulsion coolant system with a belt filter. Year of manufacture: 2010, flow rate: 500 l/min, power consumption: 21.2 kW. Further specifications can be found on the nameplate. Ibjdpfev N U Ezsx Ahyjc

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft Ibjdpfshkzttjx Ahyjc For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Year of construction: 2022, condition: like new (used), For sale is a professional Mobile CIP (Cleaning In Place) System manufactured by the renowned German brewery equipment manufacturer, Kaspar Schulz. The unit was manufactured in 2022/2023 and has never been used in regular production. It is in excellent, near-new condition. Ideal for: Craft breweries Industrial breweries Distilleries Beverage manufacturers Dairy industry Food processing plants Main Features: 2 × 210 L stainless steel tanks Fully automated WAGO PLC control system WAGO TP600 Touch Panel HMI Siemens SITRANS MAG 5000 electromagnetic flow meter Siemens MAG 1100 F DN40 sensor ProMinent chemical dosing pumps High-quality KPA process pump Stainless steel pipework and frame Complete electrical control cabinet Technical Specifications: Manufacturer: Kaspar Schulz (Germany) Year of manufacture: 2022/2023 Tank capacity: 2 × 210 liters Power supply: 3 × 400 V / 50 Hz Current: 19 A Main fuse: 32 A Maximum operating temperature: 80°C Isdezm R Amepfx Ahyjbc Flowmeter: Siemens SITRANS MAG5000 + MAG1100F Control: WAGO PLC + TP600 Touch Panel Condition: The machine has never been used in continuous production. Excellent cosmetic and technical condition. Can be inspected in Wrocław, Poland. Worldwide shipping can be arranged. VAT invoice available. Additional photos, videos, and technical documentation are available upon request.

Condition: used, Year of construction: 2016, 1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible. Ibsdpfxjzvghko Ahyoc

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Ibodpfxjwty H De Ahyoc Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2022, condition: ready for operation (used), A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible. Ijdpfjudm Dtox Ahyebc

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Ibsdsz I S R Eopfx Ahyjc Washing, rinsing, and drying in a continuous system with a washing basket to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). The system is still connected to power. System description, technical data & plans – see PDF. All technical specifications, illustrations, and content are non-binding and without guarantee. Subject to change and errors. All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and in the invoice. EXW (Ex Works) D-92729 Weiherhammer Excludes dismantling, removal, and loading. Delivery time: immediately Subject to prior sale / Payment due immediately upon completion of purchase.

Condition: good (used), simple coolant system with approximately 80-liter capacity Iodpoz D Smfjfx Ahysbc

Year of construction: 2001, condition: used, Water consumption per cycle: 35/40l, electrical connection: 36A, connected load: 22.5kW, length: 640mm, width: 640mm, height: 640/1000mm, an on-site inspection is possible. Iodpfez S Ivtsx Ahyobc

Condition: good (used), Zippel Crankshaft Cleaning System Zippel Crankshaft Cleaning System L x W x H = 3520 x 520 x 700 mm Ibsdpfx Ajihfn Iohyec You can find other cleaning systems in various sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2018, functionality: fully functional, total width: 1,381 mm, total length: 3,170 mm, total height: 2,056 mm, maximum load weight: 40 kg, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, 2-chamber ultrasonic cleaning system with a goods lift and manual transfer unit to move items from chamber 1 (cleaning) to chamber 2 (rinsing). Oscillation/movement of goods is performed via the goods lift. Basket: 600x400x400h mm - Loading can be done directly at the goods lift from the front. Both chambers are equipped with ultrasonic transducers (at the bottom); frequency: 40 kHz, power: 1200 watts (peak 2,400 watts). Chamber internal dimensions: 750x450x520h mm, volume: approx. 120 liters; chamber material: stainless steel 1.4571. Both chambers are equipped with an oil separator (manufacturer: Belki) and a candle filter (9 3/4" - fineness 100 or 50 microns, selectable). Ibodpfxezgwqwo Ahyjc Heating in both chambers: 2 kW each. Connection power: 12 kW - supplied ready for connection with a 32-ampere plug.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. Isdpfxezvlm Es Ahyobc The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Year of construction: 2013, condition: used, Parts cleaning system Manufacturer: Render Type: W 92 AM HD WT Year of manufacture: 2013 Data, washing chamber: Basket diameter: 900 mm Usable internal height: 520 mm Load capacity: 200 kg Pump performance: Flow rate: 240 liters/min. Pressure: 3 bar Washing tank capacity: 130 liters Heating power: Washing tank: 8 kW Drying: 4 kW Washing: 65 °C Drying: 130 °C Safety temperature limiter: yes External dimensions WxDxH (lid open) / Weight Ibodpfxsz R Tp Ds Ahyec Cleaning system: 1,500 x 1,420 x 1,780 (2,300) mm / 390 kg Trolley: 950 x 1,100 x 1,220 mm / 80 kg 141026ä

Year of construction: 2014, condition: excellent (used), Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Working volume: 700 mm Filling capacity: 280 l / 280 l Degreasing system Temperature °C Heating: 18 / 12 kW Extraction: 0.56 kW Ijdpfxopuduxo Ahyebc Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total power consumption: 84 A 400 V Degreasing system Dimensions: approx. 210x200x260 cm Year of manufacture: 2014 Special equipment: Fine filter Drainage pump You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Ibjdpfxsx Hff Ee Ahyec