Used Pressure Regulator for sale (16,001)

Condition: good (used), Pressure regulator intermediate plate -Type: LR-ZP-A/B-D2 35428 Kfsdpfx Asb A Ixnsffea -From: 0 bar to: 12 bar -Price: per piece -Quantity: 8x Available -Weight: 2 kg

Condition: good (used), Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg Kfjdpjk Aubiofx Affea

Condition: good (used), Pressure regulator intermediate plate Kodpfxect Nvie Affjfa -Manufacturer: Festo -Type: LR-ZP-AD-2 -From: 0 bar to: 12 bar -Number: 1x valve available -Price: per piece -Dimensions: 250/60/H55 mm -Weight: 1 kg

Condition: good (used), pressure monitor, pressure switch, pressure regulator, gas pressure regulator, dial air regulator -Manufacturer: Wilkerson, pressure regulator Dial-Air-Regulator Kjdpfovy Enuox Affsfa -Type: R21-C4-L00 B -Control range: 0-3 bar / 0-40 psi -Inlet pressure: max. 21 bar / 300 psi -Dimensions: 81/68/H103 mm -Weight: 0.9 kg

Condition: used, Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Fisher, LPG pressure regulator series 912 unused OVP Kfodpfx Afeubfxqefea -Type: 912H-108 FS912H-108 -Control range: 0.5-2.5 psi / 3.4-17.2 kPa -p max.: 250 psi / 17,2 bar -Number: 5x pressure regulators available -Price: per piece -Carton dimensions: 90/85/H75 mm -Weight: 0.5 kg/piece

Condition: used, Heating, gas and oil burners, gas burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator Kfodpfx Ajuxg Nzoffea -Manufacturer: Fisher, LPG pressure regulator series 912 -Type: 912H-108 -Control range: 0.5-2.7 psi -p max.: 250 psi / 17.2 bar -Dimensions total: 165/70/H85 mm -Weight: 0.5 kg

Condition: used, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator Kjdpfx Afsghtpbofjfa -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Kfjdpfx Ajtrdyrjffea Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible Kfodpfx Asfz Dvvsffoa The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Kjdpfx Afjfz Ax Sefefa • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Kfedpfsflpmqex Affja Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Ksdpofzrapsfx Affsfa • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Kfodpfxjfz A D Ns Affoa Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Pressure beam panel saw FIMAL CONCEPT 350 - used - Tiltable up to 46°, extendable angle stop up to 2,500 mm, digital display on the angle stop, mitre stop +/- 50°, automatic cutting length detection, stepless feed of the saw carriage, touchscreen, cutting line laser ----- Technical Data ----- Cutting length: 3,200 mm, Cutting width: 1,300 mm, Kfjdoxdl N Aspfx Affea Max. cutting height: 100 mm, Saw unit feed rate max.: 0 - 40 m/min., Main saw motor output: 5 kW, Main saw blade Ø: 350 mm, Dust extraction port (bottom) Ø: 120 mm, Dust extraction port (pressure beam) Ø: 100 mm, Compressed air connection: 7 bar Quality Info: - complete basic inspection - complete basic cleaning - electrics checked - immediately operational

Condition: used, tank capacity: 130 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 150 mm; immersion tubes inside the tanks; some minor dents Internal diameter: 508 mm Total height: 1,000 mm Max. overpressure: 3.00 bar Location: Bremen Technical documentation: Drawing Nameplate: Kfjdpfx Aexqc Nyoffea Vacuum: 1.00 bar Volume: 130 liters Cylinder wall thickness: 2.5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 488 mm Previous application: pharmaceutical industry VESSEL Max. permissible operating temperature: 200°C EQUIPMENT Manway / Dome: handhole Outlet: not available TECHNICAL DATA / DIMENSIONS Head wall thickness: 2.5 mm

Condition: used, tank capacity: 650 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: The tank was originally mobile on 4 plastic casters, which are no longer present; for stationary installation, the rollers either need to be replaced by the buyer or the feet must be adequately supported, as the lower base/outlet extends beyond the end of the feet External diameter: 1,120 mm Internal diameter: 1,000 mm Total height: 1,600 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 148 °C Max. permissible operating pressure: 10.0 bar Max. overpressure: 1.70 bar Location: Bremen Cylinder temperature control: Double jacket Nameplate: Volume: 650 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 700 mm Last application: Pharmaceutical TANK Max. permissible operating temperature: 148 °C HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: Hermetically welded Kedpfx Afsxqc Nmsfsfa Insulation jacket material: Stainless steel EQUIPMENT Manway/Dome: In top head, handhole Note: Pressure marks on the insulation jacket, scratches inside Outlet: 35 mm MATERIAL SPECIFICATION External surface: Ground Internal surface: Ground Foot material: Stainless steel

Condition: used, tank capacity: 750 l, GENERAL Design: vertical Remarks: Top head made from 1.4541 (V2A); metallic discolorations inside the vessel; manhole in the top head with 350 mm diameter External diameter: 900 mm Internal diameter: 790 mm Total height: 2,150 mm Kfjdpfxexqc I Ao Affea Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.50 bar Support type: height-adjustable legs Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 750 liters Double jacket volume: 80.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,230 mm Previous application: pharmaceutical industry VESSEL Max. permissible operating temperature: 135 °C Number of legs: 3 pieces INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head Outlet: DN50 DIN 11851 Note: slight adhesions, pressure marks on the insulation jacket MATERIAL PROPERTIES Material of legs: stainless steel

Condition: used, tank capacity: 1,235 l, GENERAL Design: Container Remarks: Pneumatic butterfly valve; welded piping inside the tank (see photos); cone height approx. 530 mm; minor differences in individual tank design possible Internal diameter: 1,200 mm Total height: 2,150 mm Kedpfx Afsxqc Iiofofa Max. overpressure: 0.5 bar Support type: Feet Location: Bremen Technical documentation: Drawing, various documents, operating manual Nameplate: Vacuum: 1.0 bar Volume: 1,235 liters Cylinder wall thickness: 4 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 660 mm Previous application: Pharmaceutical TANK Max. permissible operating temperature: 100 °C Lower head: Conical bottom Number of feet: 4 EQUIPMENT Manhole / Dome: in the top head (DN 400) Outlet: 250 mm MATERIAL SPECIFICATION Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 4 mm

Condition: used, tank capacity: 1,175 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Internal diameter: 1,000 mm Total height: 2,050 mm Heating/Cooling: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.50 bar Support type: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: Thermoplate Nameplate: Volume: 1,175 liters Double jacket volume: 7.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contacting material: V2A 1.4301 (AISI 304) Condition: factory new Cylindrical height: 1,250 mm VESSEL Max. permissible operating temperature: 50 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom heating/cooling: Thermoplate EQUIPMENT Manhole / Access hatch: on cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Surface outside: ground/polished Surface inside: ground/polished Kedpfxsxqcqdo Affsfa Feet material: stainless steel

Year of construction: 2015, condition: used, tank capacity: 1,195 l, GENERAL Equipment: Level indicator (not guaranteed), spray head, lifting lugs Design: vertical Year of manufacture: 2015 External diameter: 1,200 mm Internal diameter: 1,000 mm Overall height: 2,340 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.00 bar Mounting type: on feet Location: Bremen Technical documentation: Drawing, TÜV certificates, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Capacity: 1,195 litres Double jacket volume: 2.0 litres Double jacket material: V2A 1.4301 (AISI 304) Product contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 1,250 mm VESSEL Max. permissible operating temperature: 50 °C Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Kedoxqcp Topfx Affjfa Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 80 mm EQUIPMENT Manhole / Dome: in cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Internal surface: polished (high-gloss finish) Feet material: stainless steel

Condition: used, tank capacity: 13,700 l, GENERAL Features: Disc valve, spray head, crane lugs Design: vertical Remarks: Cone height approx. 1,300 mm Internal diameter: 2,600 mm Total height: 4,650 mm Heating/cooling: available Max. allowable operating temperature: 2 °C Max. allowable operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Support type: Height-adjustable feet Location: Bremen Technical documents: Drawing Cylinder tempering: Rectangular half-pipe coil Name plate: Volume: 13,700 liters Volume double jacket: 40.0 liters Wall thickness cylinder: 3 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,800 mm Previous application: Yeast tank in a brewery Kedoxqcptopfx Affsfa TANK Max. allowable operating temperature: 20 °C Bottom: Conical bottom Number of feet: 4 pcs EQUIPMENT Manhole / access hatch: on top (DN 400) Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Material tempering system: V2A 1.4301 (AISI304) Feet material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 15,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Bracing between the feet made of standard steel (see photos) Inner diameter: 2,200 mm Total height: 5,900 mm Kedpfsxqcpgex Affofa Heating/cooling: available Max. permissible operating temperature: 3 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 1.0 bar Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 15,000 liters Double jacket volume: 30.0 liters Cylinder wall thickness: 3.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,360 mm Last application: brewery TANK Max. permissible operating temperature: 25 °C Number of feet: 3 pcs EQUIPMENT Manhole/dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: slight residues MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.4 mm

Condition: used, tank capacity: 130 l, GENERAL Design: upright Remarks: Handhole diameter approx. 150 mm; dip tubes inside the tanks; partially smaller dents Internal diameter: 490 mm Total height: 980 mm Max. excess pressure: 1.50 bar Location: Bremen Nameplate: Volume: 130 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Last intended use: pharmaceutical VESSEL Max. permitted operating temperature: 200°C EQUIPMENT Ksdpfx Ajxqcfzeffsfa Manhole / dome: handhole Outlet: not available

Condition: used, tank capacity: 1,000 l, GENERAL Design: Container Notes: partially slight differences in execution; overall height 1800 - 1960 mm; some drawings available Internal diameter: 1,100 mm Overall width: 1,200 mm Overall length: 1,200 mm Insulation: available Max. overpressure: 2.00 bar Mounting type: Frame Location: Bremen Technical documentation: TÜV papers Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Last intended use: Transport container for glue INSULATION Insulation material: PU foam Cladding material: galvanized steel EQUIPMENT Manhole / dome: on top cover (DN 400) Kfodpfx Aexqcfhoffja Remark: minor adhesions, dents on insulation jacket, signs of use Outlet: 76 mm MATERIAL SPECIFICATION Leg material: galvanized steel

Condition: used, tank capacity: 2,700 l, GENERAL Kfedpoxqcdqsfx Affoa Equipment: Spray head, crane eyes Design: vertical Remarks: Technical drawing includes structural modifications Outer diameter: 1,600 mm Inner diameter: 1,500 mm Overall width: 1,700 mm Overall height: 2,900 mm Overall length: 2,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 0.5 bar Max. overpressure: 0.99 bar Base type: mobile frame Location: Bremen Technical documents: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 0.50 bar Volume: 2,700 litres Double jacket volume: 90.0 litres Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,000 mm Last application: Transport container for viscous gels TANK Max. permissible operating temperature: 50 °C INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manhole / dome: in top head (DN 400) Outlet: 95 mm MATERIAL SPECIFICATION External surface: marbled