Used Pressure Vessel for sale (14,845)

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A Chsdpfxjtrdyrj Ab Tsf

Condition: used, tank capacity: 5,400 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; the half-pipe coil is not shown in the tank drawing Speed: 450 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX guidelines under local conditions must be checked) Total height: 3,700 mm Heating/Cooling: available Power: 3.6 kW Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Base shape: Ring Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,400 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,690 mm Previous application: Chemistry TANK Chodpfx Aboxqa Dnj Tof Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway/Dome: on top head (DN 500) Outlet: Flange DN100 Note: minor residues MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 volts Bottom bearing: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: eccentric in the top head Agitator documentation: Extensive agitator documentation available Top head wall thickness: 16 mm

Condition: used, tank capacity: 568 l, GENERAL Equipment: control cabinet (without guarantee) Design: upright External diameter: 900 mm Internal diameter: 810 mm Total height: 1,830 mm Heating/Cooling: available Max. permissible operating temperature: 134 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 2.0 bar Upper cover: removable/hinged upper cover Agitator: agitator flange Base design: mobile on castors Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 568 liters Double jacket volume: 108.0 liters Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 850 mm Last application: pharmaceutical VESSEL Max. permissible operating temperature: 134 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom tempering: double jacket EQUIPMENT Note: scratches inside Outlet: 23 mm MATERIAL SPECIFICATION External surface: polished Internal surface: ground Temper system material: V2A 1.4301 (AISI304) Chsdpoxqa Dhefx Ab Tof Foot material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in upper cover

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Dents in the insulation jacket possible; the manufacturing and documentation drawings are available from the manufacturer and can be purchased separately there Speed: 429 rpm Outer diameter: 1,890 mm Inner diameter: 1,680 mm Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 2.2 kW Max. permitted operating temperature: 140 °C Max. permitted operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Agitator: Propeller Csdsxqazaspfx Ab Tehf Base type: Height-adjustable feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,500 liters Double jacket volume: 154.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Last application: brine TANK Max. permitted operating temperature: 140 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permitted vacuum: 1.0 bar Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on top head (DN 400) Note: slight residues present, outlet nozzle cut off Outlet: 38 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 120 l, GENERAL Design: vertical Notes: Mobile frame made of V2A; lid clamping ring is missing Cjdpfx Asxqay Njb Tshf External diameter: 500 mm Internal diameter: 400 mm Total height: 1,200 mm Heating/cooling: available Max. permissible operating temperature: 15 °C Max. permissible operating overpressure: 1.0 bar Max. overpressure: 1.5 bar Top cover: Top removable / can be folded open Agitator: Magnetic stirrer Mounting style: mobile frame Location: Bremen Cylinder tempering: Double jacket Nameplate: Volume: 120 liters Double jacket volume: 16.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 750 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 130 °C EQUIPMENT Outlet: 35 mm MATERIAL PROPERTIES Outer surface: ground Inner surface: polished AGITATOR 1 Agitator configuration: Bottom-mounted Agitator equipment: Motor/gear unit for the magnetic stirrer is not included

Condition: used, tank capacity: 3,860 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Notes: Support ring, Fe; manhole cover incomplete (see photos) Rotation speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand/base type: Ring Location: Bremen Technical documentation: Drawing, various documents Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 litres Double jacket volume: 136.0 litres Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manway / Dome: in upper head (DN 600) Outlet: available Note: Dents in insulation jacket, manway cover plated Cjdpjxqaxlofx Ab Tehf MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centrally positioned in upper head Agitator equipment: Gearbox housing slightly damaged in one area (see photos) Upper head wall thickness: 8.14 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 support brackets made from V2A; manhole cover fastening bolts incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: beam agitator Agitator mounting: agitator flange Codpfxsxqaw Io Ab Tjhf Support type: brackets Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last previous use: chemicals VESSEL Max. permissible operating temperature: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) Discharge: flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator arrangement: lateral on cylinder AGITATOR 1 Agitator manufacturer: Ekato Baffle: TECHNICAL DATA / DIMENSIONS Base wall thickness: 4.6 mm Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Codpfx Aoxqawuob Tjhf Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: used, Year of construction: 2007, tank capacity: 1,700 l, GENERAL Equipment: Spray head Design: upright Year of construction: 2007 Outer diameter: 1,400 mm Inner diameter: 1,170 mm Total height: 3,250 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 4.0 bar Top head: removable / hinged top head Agitator: bucket agitator Agitator shaft: agitator flange Support design: height-adjustable feet Location: Bremen Technical documentation: drawing, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,700 liters Double jacket volume: 230.0 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,170 mm Last application: pharmaceutical VESSEL Max. permissible operating temperature: 100 °C Number of feet: 3 pcs Chodpfx Aboxqauao Tsf HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/Dome: on top head (DN 500) MATERIAL SPECIFICATION Exterior surface: high gloss Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 2 Agitator position: side-mounted on cylinder AGITATOR 1 Agitator position: off-center in top head Agitator equipment: motor/gearbox unit no longer present

Condition: used, tank capacity: 225 l, GENERAL INFORMATION Features: crane lugs Design: vertical Notes: 4-legged frame made of V2A; handhole diameter approx. 155 mm Speed: 156 - 838 rpm Outer diameter: 800 mm Inner diameter: 590 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,400 mm Heating/cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 95 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 1.0 bar Top cover: removable/hinged top cover Shaft seal: mechanical seal with thermosiphon vessel Agitator: propeller Base design: frame Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Chodpfx Absxqatvo Tef Volume: 225 liters Double jacket volume: 60.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: chemical industry VESSEL Max. permissible operating temperature: 95 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole: handhole Note: slight adhesions Outlet: 25 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 220/380 Volt Interference suppressor: Agitator arrangement: centrally in top cover Agitator features: speed adjustable via handwheel

Condition: used, tank capacity: 1,344 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: The container was modified at the end of 2012 (nozzle welding and shortening of the support legs; TÜV inspection certificate available; the drawing attached in the documentation is the original drawing; 1 dent in the insulation jacket) Speed: 440 / 940 RPM Outer diameter: 1,350 mm Inner diameter: 1,180 mm Total height: 2,400 mm Heating/Cooling: present Insulation: present Power: 0.33 / 1.85 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Mechanical seal: Mechanical seal with thermosyphon vessel Agitator: Propeller Support: Height-adjustable feet Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,344 liters Double jacket volume: 76.0 liters Cylinder wall thickness: 8 mm Product contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 750 mm Last application: Pharmaceutical TANK Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING / COOLING JACKET Bottom tempering: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel Chjdpfx Aboxqaqhj Tef EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: DN80 DIN 11851 MATERIAL PROPERTIES Material of tempering system: V2A 1.4301 (AISI304) Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.8 mm Agitator arrangement: Eccentric in the top head Top head wall thickness: 6 mm

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Spray head Design: vertical Remarks: Original drawing available; vessel was modified at the end of 1996 (test report available, no modification drawing); 1 welded bracket inside the vessel Speed: 705 rpm Outer diameter: 1,400 mm Inner diameter: 1,200 mm Total height: 2,450 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Chsdpoxqaqbefx Ab Tsf Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Top head: removable/hinged top Mechanical seal: mechanical seal with thermal siphon vessel Agitator: propeller Base type: feet Location: Bremen Technical documents: drawing, TÜV certificates Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 litres Double jacket volume: 192.0 litres Wall thickness cylinder: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 840 mm Last application: Pharmaceuticals VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom head temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Head wall thickness: 8 mm Agitator arrangement: eccentric in the top head

Condition: used, Year of construction: 2010, tank capacity: 1,410 l, GENERAL Equipment: spray head, crane lugs Design: suspended Year of manufacture: 2010 Notes: 4 stainless steel support feet; total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank; 1 external dirt protection collar over the feet (diameter approx. 1,740 mm) Csdpfxsxqap Dj Ab Tehf Speed: 960 rpm Outer diameter: 1,450 mm Inner diameter: 1,300 mm Total height: 2,250 mm Heating/Cooling: present Insulation: present Power: 3 kW Max. permissible operating temperature: 150 °C Max. permissible operating pressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Support type: feet Location: Bremen Technical documentation: drawing, TÜV papers, various documents, CE marking and declaration of conformity, operating manual Jacket temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last intended use: cosmetics VESSEL Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on the top cover (DN 500) Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.9 mm Agitator arrangement: bottom-mounted Top wall thickness: 6.1 mm

Condition: used, Year of construction: 2008, tank capacity: 2,900 l, GENERAL Equipment: Lifting lugs Construction type: Suspended Year of manufacture: 2008 Remarks: 4 support feet made of stainless steel; total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank Speed: 960 rpm Outer diameter: 1,800 mm Inner diameter: 1,650 mm Total height: 2,600 mm Heating/cooling: available Insulation: available Power: 4 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: Propeller Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates, various documents, CE marking and declaration of conformity Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,900 liters Double-jacket volume: 110.0 liters Cylinder wall thickness: 4.8 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 900 mm Last application: Cosmetics TANK Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: on the top head (DN 500) Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt Chedsxqapwepfx Ab Tef TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.5 mm Agitator arrangement: Bottom entry Agitator documentation: Technical documentation for the agitator available Top head wall thickness: 6.7 mm

Condition: used, Year of construction: 2008, tank capacity: 1,410 l, GENERAL Equipment: Spray head, crane lugs Chjdpfx Abjxqapqs Tof Design: suspended Year of manufacture: 2008 Remarks: 4 stainless steel support legs; overall height is estimated; slight metallic discolorations inside the tank Speed: 960 RPM Outer diameter: 1,450 mm Inner diameter: 1,300 mm Overall height: 2,400 mm Heating/Cooling: available Insulation: available Power: 3 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Base type: support legs Location: Bremen Technical documentation: drawing, TÜV certificates, various documents, CE marking and declaration of conformity, operating manual Shell tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last application: cosmetics TANK Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway/dome: on top (DN 500) Discharge: 65 mm AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.9 mm Agitator arrangement: bottom-mounted Agitator equipment: technical documentation for the agitator available Top wall thickness: 6.1 mm

Condition: used, Year of construction: 2018, tank capacity: 500 l, GENERAL Equipment: Spray head, crane lugs Design: Hanging Year of manufacture: 2018 Remarks: Comprehensive documentation according to pharmaceutical industry standards included in delivery; unit was built for a global pharmaceutical company but was never commissioned at that site; handhole with sight glass diameter: 285mm Speed: 408 RPM External diameter: 960 mm Internal diameter: 780 mm Heating/Cooling: available Insulation: available Power: 0.37 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Top head: bolted lid Agitator: Magnetic agitator Support type: Lug feet Location: Bremen Technical documentation: Drawing, TÜV certificates, acceptance certificate, CE marking and declaration of conformity, operating manual Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 500 liters Double jacket volume: 88.0 liters Cylinder wall thickness: 8.9 mm Product-contacting material: V4A 1.4539 (AISI316) Condition: unused Cylindrical height: 1,015 mm VESSEL Max. permissible operating temperature: 150 °C Specific gravity of medium: 1.2 (to/m³) Bottom head: torispherical bottom HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manhole / Dome: Handhole Outlet: available AGITATOR 1 Agitator manufacturer: Zeta GmbH Voltage: 230/400 volts Csdpfx Abjxqanmj Tjhf TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 6.1 mm Agitator positioning: bottom entry Agitator features: Magnetic agitator, presumably speed-controlled (external controller not included) in the range of 75 - 500 RPM Top head wall thickness: 4.3 mm

Condition: used, Year of construction: 2007, tank capacity: 1,880 l, GENERAL Equipment: Spray head, crane lugs, control cabinet (no guarantee) Design: vertical Year of manufacture: 2007 Remarks: 1 pump (brand GRUNDFOS) is included in the scope of delivery; 1 control cabinet (previously operated with 3 of these tanks by the former owner) can be purchased at extra cost (see photos) Speed: 329 RPM External diameter: 1,520 mm Internal diameter: 1,250 mm Total height: 2,600 mm Heating/Cooling: present Insulation: present Power: 0.75 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Stand design: Height-adjustable feet Location: Bremen Technical documentation: Drawings, various documents, CE marking and declaration of conformity Cylinder heating/cooling: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,880 liters Jacket volume: 97.0 liters Cylinder wall thickness: 5 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,140 mm Previous application: Pharmaceutical VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: 48 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt Csdpfx Ajxqangob Tshf TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator arrangement: Bottom-mounted

Condition: used, Year of construction: 2007, tank capacity: 880 l, GENERAL INFORMATION Equipment: Spray head, crane lugs, control cabinet (no guarantee) Cedpfx Ajxqanaeb Tohf Design: vertical Year of manufacture: 2007 Speed: 329 rpm External diameter: 1,060 mm Internal diameter: 900 mm Overall height: 2,300 mm Heating/cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Top cover: removable / hinged Agitator: magnetic stirrer Base design: height-adjustable feet Location: Bremen Technical documentation: drawing, various documents, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 880 liters Double jacket volume: 41.0 liters Cylinder wall thickness: 10 mm Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,150 mm Previous application: pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel FEATURES Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: underfloor

Condition: used, Year of construction: 2007, tank capacity: 390 l, GENERAL Equipment: Spray head, crane lugs, control cabinet (no guarantee) Design: vertical Year of manufacture: 2007 Remarks: 1 pump included in the scope of delivery (no guarantee of functionality) External diameter: 810 mm Internal diameter: 650 mm Total height: 2,050 mm Heating/cooling: present Insulation: present Power: 0.37 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Top head: removable/top cover can be swung open Agitator: magnetic stirrer Mounting: height-adjustable feet Location: Bremen Technical documentation: drawings, various documents, CE marking and Declaration of Conformity Cylinder temperature control: double jacket Name plate: Vacuum: 1.0 bar Volume: 390 liters Double jacket volume: 26.0 liters Cylinder wall thickness: 8 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 990 mm Last application: pharmaceuticals Chodpfxoxqam Aj Ab Tjf VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs. HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm

Condition: used, tank capacity: 885 l, GENERAL Equipment: Crane lugs Design: suspended Comments: The containers were previously suspended by the previous operator in a ring with load cells, which was installed in the floor (one ring each is included in the scope of delivery; see photos); External diameter in ring approx. 1,540 mm; Insulation jacket made of material 1.0425 Speed: 416 RPM Internal diameter: 1,000 mm Heating/cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing, various documents Jacket temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 885 liters Double-jacket volume: 35.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Cedpjxqamvefx Ab Tshf Condition: used Cylindrical height: 864 mm Last application: Pharmaceuticals TANK Max. permissible operating temperature: 130 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation material: mineral wool EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: 55 mm MATERIAL SPECIFICATION Material of temperature control system: V2A 1.4541 (AISI304) AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.5 mm Agitator arrangement: bottom entry Agitator equipment: agitator data from one of the two tanks, the second tank does not have a motor nameplate (we assume the agitator data are identical); various technical documents relating to the magnetic agitators

Condition: used, tank capacity: 420 l, GENERAL Design: vertical Remarks: One of the pressure vessels is sold with 3 load cells; pneumatic bottom discharge valve mounted at the outlet; manway diameter approx. 300 mm Speed: 2820 rpm Internal diameter: 785 mm Overall width: 1,050 mm Overall length: 1,150 mm Heating/cooling: available Insulation: available Power: 0.55 kW Max. allowable operating temperature: 130 °C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: magnetic stirrer Support type: feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 420 litres Double jacket volume: 20.0 litres Double jacket material: V2A 1.4541 (AISI 304) Product-contacting material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 700 mm Last application: pharmaceutical industry VESSEL Max. allowable operating temperature: 130 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel Csdpfx Aexqakuob Tjhf EQUIPMENT Manway / access port: on top cover Outlet: clamp Outlet: 45 mm MATERIAL COMPOSITION Feet material: stainless steel AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Condition: used, Year of construction: 2001, tank capacity: 620 l, GENERAL Equipment: Control cabinet (no guarantee) Design: standing Year of manufacture: 2001 Remarks: Mobile frame made of stainless steel with 4 plastic casters Outer diameter: 1,010 mm Inner diameter: 800 mm Total height: 2,050 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 135°C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 4.0 bar Top cover: Removable/foldable top cover Agitator: Magnetic stirrer Type of stand: mobile frame Location: Bremen Cedpfxsx Dmd Ij Ab Tshf Technical documentation: Drawings, various documentation, CE marking and declaration of conformity, operating manual Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 620 liters Double jacket volume: 12.0 liters Cylinder wall thickness: 4 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Last application: Pharmaceutical VESSEL Max. permissible operating temperature: 135°C Specific weight of medium: 1.3 (t/m³) HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Discharge: 40 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4435 AGITATOR 1 Agitator manufacturer: HANAG Steriltechnik AG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Agitator mounting: bottom Agitator equipment: Drive controllable via control cabinet; various technical documents for the agitator available Top cover wall thickness: 6 mm

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Lugs made of steel; the insulation jacket has partially detached in the area of the lower base (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Insulation: available Power: 2 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 6.0 bar Max. excess pressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support design: Feet Location: Bremen Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 liters Double jacket volume: 166.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Pharmaceutical chemistry Chedpfx Absxqah He Tef VESSEL Max. permitted operating temperature: 200 °C Number of legs: 4 pieces HEATING/COOLING JACKET Bottom tempering: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: galvanized steel EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: 140 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator mounting: central in the top head Agitator equipment: Provisions for flow breakers inside the vessel (flat plates for flow breakers not present; see photos)

Condition: used, tank capacity: 6,875 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Half-pipe coil only in the lower area of the cylinder; Manhole diameter: 500mm; Speed: 950 rpm Internal diameter: 1,986 mm Total height: 2,710 mm Heating/cooling: available Power: 1.3 kW Max. permissible operating temperature: 200°C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Stand type: feet Location: Bremen Technical documentation: Drawings, various documents Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 6,875 liters Jacket volume: 120.0 liters Product contact material: V4A 1.4571 (AISI316) Chsdpjxqahtsfx Ab Tef Condition: used Cylindrical height: 1,670 mm VESSEL Max. permissible operating temperature: 200°C End caps: dished ends Number of feet: 3 pieces HEATING/COOLING JACKET Bottom tempering: half-pipe coil EQUIPMENT Manhole / dome: in-cylinder Outlet: flange DN80 AGITATOR 1 Voltage: 230/400 volts Agitator arrangement: side-mounted on the cylinder

Condition: used, tank capacity: 2,950 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 4 feet made of V2A; total height stated is estimated Speed: 1475 rpm Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 151 °C Max. permissible operating overpressure: 5.0 bar Max. overpressure: 2.5 bar Agitator: Dissolver Support type: feet Location: Bremen Technical documentation: drawing, TÜV papers Cylinder temperature control: double jacket Nameplate: Vacuum: 0.9 bar Volume: 2,950 litres Double jacket volume: 148.0 litres Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last application: pharmaceutical TANK Max. permissible operating temperature: 138 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulating jacket: hermetically welded Insulation material: mineral wool Insulating jacket material: stainless steel Insulation thickness: 70 mm EQUIPMENT Manhole / dome: in upper head (DN 500) Outlet: available MATERIAL SPECIFICATION Chsdpfoxqadzjx Ab Tsf Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator arrangement: offset in upper head Agitator equipment: additional 1 propeller on agitator shaft Top head wall thickness: 5.7 mm