Used Press Punch for sale (28,507)

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Dedjxdxbxjpfx Afzoku Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Pressing force: 320 kN (≈ 32 tons) Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used) Dodpfx Aodzqddjfzeku

Condition: used, Year of construction: 2001, Combined punching machine with shear and automatic loading/unloading system – FINN-POWER SG + TRS6FB _____ Dedpfjw Iflmsx Afzeku Brand: FINN-POWER Model: SG + TRS6FB Year of manufacture: 2001 Machine weight: 22,000 kg Punching force: 300 kN Shearing force: 250 kN Max. working pressure: 300 bar Description: CNC combination punching machine + corner shear, complete with: • automatic loading system with sheet metal storage • CNC rotary turret • integrated corner shear • conveyor belts for unloading • soundproof cabin and safety guards • dedicated Finn-Power CNC The machine is currently installed and can be inspected by appointment. Condition: • Immediately available 📍 Location: Italy _____

Condition: good (used), Pressure: 25 t Dksdpfsfim Dwjx Afzsu cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Table surface usable: WxD: 440 x 360 mm

Condition: used, Year of construction: 1996, Manzoni Presse Type: 4MR 15000 Press force: 1,500 t Strokes: 10-60 1/min Stroke: 160 mm Ram adjustment: 160 mm Dodpfx Afexfcanezsku Installation height: 900 mm Table surface: 2,400 x 2,200 mm Ram surface: 2,250 x 2,200 mm

Condition: used, Year of construction: 1985, pressure 25 t Dkjdpfx Aevu E I Dofzsu no. of strokes 1500 Hub/min total power requirement 20 kW

Condition: new, neu 090142 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm Dedpfx Afewirmbozsku 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm Dedpfx Aev Tp D Hofzeku - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,000 h, machine/vehicle number: GRM80E, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: Otto Bihler, controller model: Otto Bihler, punching force: 30 t, stroke rate (min.): 99 1/min, stroke rate (max.): 120 1/min, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, overall weight: 1,500 kg, Equipment: centralized greasing system, emergency stop, We Sanjit Moulds Private Limited have a Bihler Machine GRM80E. Its a wonderful machine with Multiple Slides. We have maintained the machine properly. The price mentioned is CIF Hamburg. This machine is located in India in Nashik which is very 180 Kms from Mumbai. Dodpfxexc Txcs Afzsku

Condition: good (used), table size: 350x350mm Dodpfx Afofm A Amjzsku

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment Dkedpfexabu Tjx Afzju - die base - 1x freely movable foot switch - operating instructions (PDF)

Condition: used, Year of construction: 1980, pressure 25 t Dkedpfxsvu E Iqo Afzju no. of strokes 1500 Hub/min total power requirement 20 kW

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes Djdpsw E Emaofx Afzsku If you have further questions, we will be happy to answer them.

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Dkodpfxjw A Srwe Afzeu Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Condition: used, Year of construction: 2002, Manufacturer: Schuler Gräbener Press force: 400 t Stroke rate: 20-100 1/min Stroke adjustment: 66-203 mm Shut height: 700 mm Dkedpfx Ajxcgwxsfzeu Slide adjustment: 150 mm Table area: 3,200 x 1,200 mm Slide area: 3,200 x 1,200 mm Coil line: Manufacturer: Schuler Automation Coil width: 100 - 1000 mm Coil thickness: 0.7 - 5.0 mm Decoiler load capacity: 8,000 kg

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Dkedpfx Afsd D Ryfozsu with various punching tools

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area Dkodpfx Afjxabrfszju - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Dkedpfx Ajw U T Uvofzeu

Condition: excellent (used), Year of construction: 1990, Machine sold with accessories, table for large punches, and set of punches. Specifications: Punching force: 50 T Sheet length: mm Sheet width: mm Maximum thickness (standard steel): 20 mm Sheet length with repositioning: 60 mm Sheet width with repositioning: 4 mm Maximum punching diameter: 40 mm Stroke rate (strokes/min): 37 Maximum sheet weight: kg Number of tools: ----- Dimensions (L x W x H): 1500.0 × 1250.0 × 1900.0 mm Weight: 2000 kg Dkodpsw Nh Rhsfx Afzsu

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Dedpfx Asd Swtajfzjku Good condition

Condition: used, Year of construction: 2001, MANUFACTURER: SANGIACOMO PRESS FORCE: 250 t YEAR OF MANUFACTURE: 2001 STROKE ADJUSTMENT: 21-230 mm RAM ADJUSTMENT: 120 mm Dsdpfx Afexcgqrezjku STROKES PER MINUTE: 75 TABLE SIZE: 2,300 x 1,090 mm INSTALLATION HEIGHT: 550 mm If interested, we can also offer the machine mechanically and/or electrically overhauled.

Condition: used, Year of construction: 2007, pressure 80.0 t punching cross-cut in cmm Ø 25 in 23 mm stroke 10 - 100 mm Dodpfoxaa Rmox Afzoku column arm 510 mm work height max. 1050 mm no. of strokes 28 Hub/min punch diameter max. Ø 160 in 4.0 mm oil volume 103 l total power requirement 5.6 kW weight of the machine ca. 2300 kg. range L-W-H 1620 x 865 x 1980 mm good / well-maintained condition (!!) Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - large support table with movable stops - stepless stroke adjustment .. 10-100 mm - freely movable foot switch including protective cover - Crane hanging eye for easy transport - side storage areas - various punching tools (stamps + matrices) - Machine light - Collection container for punched material - Hydraulic unit, integrated - EMERGENCY STOP button, front - Three-phase motor, 400 volts, 50 Hz - User manual (PDF)

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min Dkedpew U U S Nefx Afzeu oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm Dodpfexaaipex Afzoku total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Year of construction: 1999, sheet width 500 mm plate length 1000 mm plate thickness max. 6,0 mm pressure 28,0 t throat 500 mm height of stroke 0 - 40 mm working area X = 1200 mm working area Y = 570 mm no. of strokes max. 180 Hub/min punch diameter max. 105 mm work height max. 900 mm oil volume 50 l total power requirement 4,0 kW weight of the machine ca. 2500 kg range L-W-H 2400 x 1580 x 1540 mm New price including accessories approx. 30.000 euros Special price on request - in checked condition - machine video - ?v=VU9BWm7SC2g The hydraulic punching machine ECCO LINE is specially designed for processing Sheet metal and profile parts have been optimized. She stands out for her Flexibility and manufacturing precision. The machines in the ECCO series LINE are equipped with 28 t punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 seconds (manually) How it works: After installing the tool, the stops are in X and Y positioned accordingly and the material pushed to the stops. Through Pressing the foot pedal will then punch the hole Features of the machine: • Maintenance-free hydraulic drive • Infinitely variable stroke adjustment • Compact unit • Constant punching force Furnishing: - robust electro-hydraulic hole punch - TRUMPF tool system with many application tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * scanning head integrated in the stops Dkodpfx Afjxaafkezju * Energy chains for supply cable to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Staking device for zeroing the axes * Reading accuracy +/- 0.1 mm - Control panel: setup, single and continuous stroke - stepless lifting height adjustment - 1x pallet/box with application tools - freely movable foot switch * Machine link: ?machineno=1008-9412165