Used Drill Press for sale (16,243)

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Gedpfx Ajyrz S Rjdvebi The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Stago PB 2015 Paper Drill This is the latest drill from Stago, originally from the office of a large company. The machine is 100% functional. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock. Sturdy construction – weighs approximately 70 kg. 230V power supply Two drilling heads. Gbsdsyrz Swjpfx Advji Drill diameter: 2-10 mm. Stack height: 60 mm. The machine has an adjustable spacing between the heads. The drill has been serviced. Drills and tools are included.

Condition: good (used), Drill, drill press, pillar drill, pillar drill -Manufacturer: Cordia, column drilling machine type S 26 -Motor: 1000W -Speeds: 95 - 1450 rpm, 6 levels -Table size: 320 x 270 mm, travel 500 mm Gsdpfx Adjlx Nvnovobi -Spindle mount: MK3 -Spindle stroke: 100 mm -Projection: 280 mm -Columns Ø: 120 mm -Accessories: including lighting and additional. attached vice, see photos -Dimensions: 700/760/H1950 mm -Weight: 325 kg

Condition: refurbished (used), 3-spindle vertical drill press Gedpfeytr Hhjx Advobi

Condition: used, Used machine 350 W power 230 V, 1420 rpm Gsdpfx Adsxwz N Eovobi 5-stage speed adjustment 660/1020/1460/1980/2860 rpm Maximum drilling capacity in steel: 13 mm Availability: short-term Storage location: Röllbach

Condition: ready for operation (used), Year of construction: 1993, type of input current: three-phase, number of spindles: 4, 4-spindle paper drilling machine with available accessories Gsdpfx Adoynl Izovobi

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. The drill table is adjustable in all planes. Godpfx Adsynfvfevjbi This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 380V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Gbodpfsynfu Ujx Advji In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: not inspected (used), functionality: unexamined, drilling depth: 150 mm, total length: 900 mm, table width: 300 mm, table length: 410 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Max. drilling depth: 150 mm Table dimensions: 410 x 300 mm Gedsym Sb Eepfx Advsbi MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 600 x 1,900 mm Weight: 400 kg EQUIPMENT With two T-slots External reference: Training workshop Part 2 / S14

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Gbodpfx Aeym Nc Hsdvji Further information: The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (infinitely variable) Feed: infinitely variable approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column stroke (W): 410 mm Arm traverse: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (a valid VAT ID number is required). Gbsdpfx Aoyrdc Sedvoi Interim sale reserved. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the item description are reserved.

Condition: used, Number of drilling agregates 1 Stk. Automatic Fitting-press in nein ja/nein Gbedpfx Aowvptfedvoi Pot volume drill ja ja/nein Electric pneumatic cup hinge drilling machine or fitting drilling machine Schafberger+Sprödhuber type BS for drilling cup hinges or fittings with mechanical centering.

Condition: used, Number of drilling agregates 1 Stk. Automatic Fitting-press in nein ja/nein Pot volume drill ja ja/nein Portas BEV electric pneumatic hinge drilling machine for drilling hinges or fittings. Gbsdpfx Aovlw Uqodvoi Support table: approx. 300 x 37 cm Weight: 180 kg

Condition: used, 300 x 37 cm engine 1,6 kW weight 180 kg Gsdpfx Adjlfcntjvjbi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Paper drilling machine Citoborma 490 (with sliding table) Hang part no.: 713-0295/108 611 Nagel part no.: 1854060 05/2019 (see photo) Gedpfx Adeyifuuovebi

Condition: used, Year of construction: 2008, Nagel Digifold Creasing and folding in a single operation Feeding: Suction feeder draws paper from below Maximum paper size (mm) L x W: 700 x 358 Gedpfx Adsyhztkovjbi Minimum paper size (mm) L x W: 210 x 140 Maximum paper weight (gsm): 400 Minimum paper weight (gsm): 100 Max. number of creases per sheet: 9 Max. number of folds per sheet: 2 Max. number of program memory locations: 9 Min. distance between two creases (mm): 40 Min. distance between two folds (mm): 70 Min. distance from leading edge to first crease (mm): 50 Min. distance from leading edge to first fold (mm): 50 Min. distance from trailing edge to last crease (mm): 50 Min. distance from trailing edge to last fold (mm): 50 Min. fold length (mm): 70 Max. fold length (mm): up to 450 (automatic feeder), up to 1,800 (manual feed) Fine adjustment (mm increments): 0.1 Max. speed (A4 sheets/hour): 5,000+ Dimensions (mm): 1,980 x 655 x 1,265 (L x W x H) Weight (kg): 190 Power supply (V): 220

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 60 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop Godpfek Iuqysx Advobi * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: excellent (used), Paper drilling machine Nagel Citoborma 290 AB Gbsdoybbi Uopfx Advei Year of manufacture: 2015 Item no.: L1131 The machine comes from a government authority. Condition: like new. Very low usage.

Condition: new, SERRMAC ETD 22 DRILL PRESS - PGM Turntable + Clamp Precise, quiet and reliable Direct drive via INVERTER without pulley change Precision spindle axis with hardened morse taper Power supply 380V 3 Ground column. Standard configurations : - Digital display with spindle speed indication - Tapping with working depth adjustment - 24 V LED lighting system - Electronic membrane control panel - Spindle rotation reverse button Drilling on steel mm: Ø 22 Tapping: M16 Cone attachment: CM2 Column diameter mm: 98 Spindle stroke mm: 120 Transmission: Direct with Inverter No. speed: Variable No. rpm: 265-4200 Godpfxjgyggzj Advjbi Motor : kW 1.8-2.5 / 380V 3-phase. Power supply V 380V 3 Weight Kg 240 Column

Condition: new, Precise, quiet and reliable drill press. Built to strict accident prevention standards. Precision spindle axis with tempered morse taper, base plate machined. Electronic speed variator included. Rotary table + vise mm 350 X 250. Drilling capacity on steel :R50 mm ø 22. Tapping capacity on steel :R50 mm M 14. Spindle taper :CM2 Spindle stroke :mm 90. Spindle sleeve diameter :mm 52. Gjdpfx Aoir Aihsdvsbi Column diameter :mm 98. Spindle center column distance :mm 201. Transmission PU Electronic variable speed drive (E). Spindle speed :Rpm 270 ÷ 4,200. Motor power :kW 0.75 / 220 V Single phase. Dimensions :( h x w x d ) mm 1950 x 600 x 680. Weight :Kg 220.

Condition: new, SERRMAC NEXT 25 PGM DRILL PRESS - DOUBLE SPEED THREE PHASE - NEW "CE" - ROTARY TABLE + VICE Drilling on steel: Ø 25 mm Tapping: M16 Column attachment: CM3 Column diameter: 98 mm Spindle stroke: 100 mm Transmission: pulleys (PU) No. of speeds: 12 No. of revolutions: 164 - 2460 rpm Motor power: 0.75 kW Power supply: 380 V - 3 phases Gbsdpfsuif Syex Advoi Weight: 185 kg

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: DC, spindle mount: MK 2, total width: 500 mm, total length: 300 mm, total height: 1,050 mm, table width: 290 mm, table length: 290 mm, overall weight: 47 kg, drilling capacity: 16 mm, column diameter: 72 mm, drill chuck size: 16 mm, spindle speed (max.): 2,840 rpm, spindle speed (min.): 220 rpm, stroke length: 85 mm, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Foot ----- 420 x 250 mm Column diameter ----- 72 mm Overall height ----- 980 mm Weight ----- 47 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor Gjdpjk Iuzijfx Advjbi * Drive key

Condition: new, Fervi T052/400VDA Milling drill. Ready for delivery except sold. With automatic descent, choice of direction of rotation and belt drive rack spindle 1 ÷ 13 b16 drilling spindle attachment cm 3 cutter attachment cm 3 ø 27 mm refrigeration system Drilling capacity with pre-hole Ø 32 mm Milling capacity with insert cutter Ø 76 mm Milling capacity Ø 20 mm Gedpfxjh Dbbgs Advsbi Head stroke 405 mm Morse taper CM 3 Column spindle distance 205 mm Max. distance between spindle and table 700 mm Spindle stroke 130 mm Manual vertical feed division 0,05 mm Sleeve Ø 75 mm

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, spindle mount: MK 2, total width: 450 mm, total length: 2,050 mm, total height: 700 mm, table width: 355 mm, table length: 405 mm, quill stroke: 120 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 90 rpm, Equipment: type plate available, 3 Phase 380V, 3 speed motor is running fine! Geared head, gears running in oil. Gsdpfx Adevnrvhevebi 9 Spindle speeds adjustable from 90 up to 1450 RPM. MT2 Spindle intake. Max. drilling depth: 120mm Max. drilling diameter: 23mm Table is height adjustable. Table size: 355x405mm Overall dimensions: 70x45x205cm Made in Germany. Include's accessories as shown on pictures in front of the machine. Contact us for shipping options! €1,950.00

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Gbedpjvac Hhofx Advoi Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column