Punching Press

GEKA PUMA 70/E-500

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm Fedpfx Aorz Tutefnspb - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm Fpodpetr U Hlefx Afneb → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Year of construction: 2007, condition: ready for operation (used), An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible. Fpjdpewhp N Dofx Afnjb

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Fpjdpfen Tnzfsx Afnob Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Year of construction: 1987, condition: excellent (used), machine/vehicle number: Abus 2to MM2, ABUS crane sky crane runway bridge crane indoor crane crane Payload / lifting load 2t - 2000KG, track about 2700mm External dimensions approx. 3100mm approx BJ 1987 with corridor control Overall height from top edge of crane to hook approx. 900mm Head carrier length without buffer approx. 2200mm Crane is dismantled, stored and immediately available. Very good condition Fpsdsifyhhepfx Afnjb There are also pillar slewing cranes and wall slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agency possible, please ask for postal code Collection preferred

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Fjdpfeu A Dgrjx Afnspb Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 44,509 h, laser hours: 28,133 h, laser power: 4,000 W, Standard Equipment Machine • Closed machine frame • Integrated cabinet • Torque drive in combination with linear direct drives • Closed beam guidance via laser light cable (LLK) • Cooling unit • Integrated switch cabinets with interior lighting • Automatic longitudinal pallet changer • 17" touch color screen • Longitudinal conveyor belt • Workspace lighting • Positioning laser diode • Spraying device • PierceLine • FocusLine • NitroLine • PlasmaLine • Microweld • Automatic nozzle cleaning TRUMPF Laser • Integrated solid-state laser TruDisk 4001 with 1 LLK output • Excitation via pump diodes • Laser power control Cutting head • Universal cutting unit • Cutting head strategy • Protective glass against lens contamination • Condition check of the protective glass • ControlLine: height control and sheet metal edge detection Control system • SINUMERIK 840D SL control • Simple workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • Programmable cutting gas pressure • Multi-sheet processing • FastLine • FlyLine • AdjustLine Fpjdpfx Afswrplyonjb Data transmission • USB interface • RJ-45 network connection • Wireless Operation Point (basis for Visual Online Support) Safety • CE marking • Light barriers • Multi-chamber extraction system • Compact dust removal system • Machine enclosure, certified viewing window, right door • Sliding roof Extended equipment • Nozzle changer • Wide transverse conveyor belt • Left sliding viewing door • Liftmaster • Loading station • Sheet separation of thin metal (s=0.8-2.0mm) • Construction steel rake (prong spacing 33.5mm) • Third position • Swivel range 180° The Liftmaster is included in the offer The machine can be inspected under production conditions Price ex works Supplier PeterHoppe GmbH 32832 Augustdorf

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm Fedpfewgkq Tox Afnepb 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is an AMADA AE-2510 NT turret punch press from 2017. The machine is in very good condition, fully functional, and has been in continuous production and regularly serviced. This is an advanced machine for precise sheet metal processing, ensuring high quality and work efficiency. Technical Data and Features: Model: AMADA AE-2510 NT Year of Manufacture: 2017 Control: Easy-to-use AMNC controller with integrated software. Drive: Energy-efficient servo-electric drive, lowering operational costs. Precision: High processing precision due to a variable drive. Tooling: Fast tool changes (approximately 1.5 seconds on average). 51 tool stations. 4 AMADEX stations for automatic tool rotation at any angle. Fjdpfxjwp Ul Ho Afnjpb The turret rotates the shortest path for minimal tool change times. Minimizes setup time. Capable of using special tools, such as slitting tools. Construction: Robust, closed frame to minimize deformation under heavy loads, ensuring high accuracy, reduced vibrations, and extended tool life. Noise and Vibration Level: Reduced due to new servo drives. Machine Condition: Used, in very good condition, fully functional. It has been in continuous production and regularly serviced. Location: Ożarów Mazowiecki, Poland Additional Information: The offer does not include disassembly, delivery, or tools.

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h weight max. 8 t weight of the machine ca. 13400 kg Fpsdpfx Aowx R T Ejfneb