Punching press

Sahinler HKM 85

Condition: new, cutting pressure: 85throat depth: 355stroke: 80length of knive: 482motor: 7,5heigth: 2040weight approx.: 2315 Kdsdpfxeh Hrx Eo Ahvsi

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Ksdpehzbipofx Ahvjdi Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Kedpfjga Tzxex Ahvodi Hydraulic bag cylinder Motor protection switch Automatic end stop

Condition: new, Year of construction: 2025, roller diameter: 140 mm, roller length: 1,570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for the movement of the rear roller - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical roller Kedogg Nv Ijpfx Ahvedi - Brake motor - Emergency stop - Documentation - 400V

Condition: new, SAHINLER HKM 65 hydraulic punch-cutter Exerted power : Ton 65. Engine power : Kw 5.5 Dimensions (mm) : mm 1.700 x 900 x 1.670 ( L x W x H ). Weight: 1.600 Kg: 1.600 Kg PUNCHING : Punching capacity : mm Ø 2 x Thickness 20 mm. Recess depth: mm 305. Punching stroke : mm 55. Working height : mm 1.030. SHEARING : Plates : mm 300 x 20. mm 375 x 15. Kodpfx Ahjggbuhsvedi Length of blades : mm 380. Round bars : mm Ø 45. Square bars : mm 45. 90° corner profiles : 120 x 120 x 12 mm. 45° corner profiles: mm 70 x 70 x 10 SKIRTING : Max thickness : mm 10. Width : mm 45. Depth : mm 90. Working height : mm 900.

Condition: used, Double Girder Overhead Crane 40T DEMAG Manufacturer DEMAG Type Double girder overhead crane Industrial Applications Kodpsxfh Ikefx Ahvsdi Heavy lifting in manufacturing, metallurgy, mechanical workshops, logistics warehouses, and port terminals. Main Technical Specifications - Lifting capacity: 40 tons - Span width: 28 meters - Structure: Double girder - Lifting system: DEMAG - Installation: Rail-mounted or on structural beams - Operation: Radio remote control or operator cabin - Use: Indoor or outdoor depending on industrial setup 🧩 Machine Usage The DEMAG 40T double girder overhead crane is designed for moving heavy loads across wide working areas. Its 28-meter span ensures full coverage of the operational zone, making it ideal for high-volume production and logistics applications. ⚙️ Features / Differentiators This model combines a 40-ton lifting capacity with a 28-meter span, offering high operational flexibility. The DEMAG lifting system ensures precise handling, maximum load stability, and proven durability for demanding industrial environments.

Condition: used, Year of construction: 1996, Max. punching force: 55 tons Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm 90° angle steel: 120x120x10 mm 45° angle steel: 70x70x7 mm Bar steel: 40 mm Square steel: 40 mm Strokes per minute with a 20 mm stroke: 37 /min Throat: 250 mm Machine weight: approx. 1,800 kg Kdsdpfxswgkq To Ahvsi

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.2129mm Width/depth (product): approx.1046mm Height (product): approx.1687mm Weight (net): approx.645kg Electrical data: Power drive motor: 3kW Supply voltage: 400V Mains frequency: 50Hz Hydraulic pump motor power: 1.4kW Motor power coolant pump: 100W Total connected load: 3.8kW Machine data: Saw blade speed(s): 20 - 80m/min Saw blade length: 3770mm Saw blade width: 34mm Saw blade thickness: 1.1mm Cutting angle: -45 - 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting ranges: Cutting range 0° round (solid material): 355mm Cutting range 0° square (solid material): 300mm Cutting range 0° rectangular upright (solid material): 300 x 490mm Cutting range -45° round (solid material): 290mm Cutting range -45° square (solid material): 250mm Cutting range -45° rectangular upright (solid material): 250 x 250mm Cutting range +45° round (solid material): 350mm Cutting range +45° square (solid material): 290mm Cutting range +45° rectangular upright (solid material): 290 x 340mm Cutting range +60° round (solid material): 230mm Cutting range +60° square (solid material): 180mm Cutting range +60° rectangular upright (solid material): 180 x 220mm Kodperah S Hjfx Ahvjdi

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm Kjdpfjfc T Tqjx Ahvodi -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm Kjdpfxjwigavs Ahvodi - 45° 320 mm 300 mm 300 x 300 mm - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades