Used Press Punch for sale (28,522)

Condition: good (used), Year of construction: 1978, functionality: fully functional, total height: 7,900 mm, total width: 5,750 mm, total length: 7,000 mm, pressing force: 2,000 t, table width: 1,650 mm, table length: 2,000 mm, overall weight: 144,500 kg, distance table to ram: 2,400 mm, Equipment: documentation/manual, 2000 tons Composite press hydraulic (isothermal) Located: Balti city (postal code: MD-3100), Republic of Moldova (European region) The press is connected and 100% complete. ----- Manufacturer: Dnepropress (Ukraine) Nominal force: 2000 tons Dsdpfow Hridjx Af Iscn Slide stroke: 1400 mm Shut height (distance between plates): 2400 mm Table size(width/length): 1650×2000 mm Overall machine dimensions: 7000×5750×7900 mm Main motor power: 62 kW Press weight: 145 tons YOM: 1986 The press is connected For molding thermoplastics, thermosetting materials, elastomers, rubber materials, and thin sheet metal. The press is equipped with a sliding table. - Molding of thermosetting materials in closed, open, and casting molds with complex cycles: heating and cooling, pressure build-up and release, dwell under load, and ejection of the finished product; - Isothermal forging of heated billets while maintaining a constant temperature of the die tooling and the billet; - Molding of powder materials, production of large-sized products from plastic masses and composites in closed heated molds; - Sheet stamping and sheet forming processes. The press has the following working and structural units and assemblies: - Working pair – ram and table, equipped with T-slots necessary for mounting additional attachments such as heating plates, which are included with this press. - Upper console (movable mechanism) with the main working cylinder mounted on it. The console moves along cylindrical guides. - Four return cylinders located on the table, ensuring smooth lifting of the ram and its return to the initial position. - Ejector mounted on the lower console (table). - Hydraulic tank and control valve mounted on the main cylinder, providing its lifting and lowering. - Spool valves and pressure regulators controlling the working cycle of the press. Installed on the hydraulic power unit with a high-pressure pump. - Limit switches ensuring the stability of the mechanical braking system of the ram. Installed on the frame. The D 2243 press is operated via a remote control panel. 27/08/2025

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr Dedpfx Afstndu Uj Iocn FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 223-380V Pr12LP Control unit GE VAT20 U20NOK7S Find more items in our shop! Dcjdpou Nyu Sjfx Af Ien

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Dedpfxjt A U Ire Af Iocn Hydraulic power supply: 380 V; 50 Hz

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Complete with control cabinet, fences and hydraulic unit, valves etc. Dodpfx Aew Adkfof Iscn Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery.

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke distance: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle: 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. Dcsdpfx Aov Hchljf Isn 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: repair required (used), Year of construction: 1990, functionality: not functional, power: 45 kW (61.18 HP), Briquetting machine, with some spareparts and 45kw motor. Dcedpfx Ajtur Ewsf Ion

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total width: 3,090 mm, total length: 2,000 mm, total height: 3,600 mm, overall weight: 3,800 kg, type of input current: three-phase, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 2,600 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Dcedpfjtx T Tyex Af Ien

Condition: new, Year of construction: 2025, functionality: fully functional, control type: pneumatic, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Dodpfx Aswqcbfef Iocn Powered by air- 6 bar Measurments: by client demands

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Dcodpfx Afofitbwo Isn Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, Fully functional, excellent working condition, well maintained. Prompt delivery. Dcjdpfxshg Abzo Af Isn Bucher Press HP 5000 TS is high mounted on surrounding platform with staircase. SIEMENS Computer-controlled control cabinet with Siemens PLC and touch screen. Stainless steel hooper screw. Filling quantity per pressing: Apples approx. 10,000 kg. Pears approx. 12,000 kg. Berries approx. 16,000 kg. Dimensions: Approx. 6.980 x 4.000 x 3.510 mm (LxWxH without base frame)

Condition: used, Metal strip unwinding - wrapping machine for the production of fencing strips. Specification: Model: Clark's press equipment Maximum sheet thickness: 0.5 mm Other: speed is not adjustable Made in: England Available in two units. Dcodpfx Aeqla Uusf Ion If you have any further questions, we will be happy to answer them.

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Height adjustment is missing, Dcsdpfxjv Umm Io Af Isn

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Djdpfxouzv Tzo Af Iecn Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: excellent (used), Year of construction: 2015, Machine type: Punching and shearing center * Model: S4Xe.40 * Year of manufacture: 2015 * Manufacturer: Salvagnini Machine type: Sheet metal bending machine * Model: P4L-3220 * Year of manufacture: 2019 * Manufacturer: Salvagnini Dcjdpfxov Tygxe Af Ion Machine type: Handling system * Type: SiX-ACN * Year of manufacture: 2015 * Manufacturer: Salvagnini * Technical specifications: Voltage: 400 V * Frequency: 50 Hz * Phases: 3 * Rated current: 36 A * Short-circuit current: 10 kA * Maximum motor current: 28.7 A * Protection class: IP54

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Dcjdpfsfcbb Hsx Af Ijn

Year of construction: 1987, condition: excellent (used), Complete with control cabinet, fences, hydraulic unit, valves, juice pump, level sensors, thermostat etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Dsdpsit Nglofx Af Iocn

Condition: ready for operation (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. Booklet Finisher A-FN13 Dcjdpfju Ra Smox Af Isn Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 4,419,328 pages Colour: Approx. 3,524,210 pages Black: Approx. 895,118 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 7 assi Y1-Y2-X-R-z1-Z2-X1, hydraulic crawling, Promecam Clamping, photocells DSP laser,with upper hydraulic locking, 2 electro-hydraulic sheet metal support system CNC Delem DA65 Djdpfolx Dqnex Af Iscn

Condition: ready for operation (used), Paneelpers met 2 verwarmde tafels Tafelafmetingen: 3200 x 1700 x 50 mm Tussen kolommen: 1700 mm Maximale afstand tussen tafels: 150 mm perssnelheid: 1,4 mm/sec retoursnelheid: 105 mm/sec sluitsnelheid: 105 mm/sec 6 zuigers - diameter van de zuiger: 200 mm - slag: 150 mm Gewicht: 19 ton Furnierpressen - Transportpers - Composietpers - Heizplattenpressen Djdpfxjwaitys Af Iocn

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 11522-20, total width: 2,250 mm, total length: 16,610 mm, total height: 3,039 mm, overall weight: 20,000 kg, temperature: 140 °C, pressure: 6 bar, working width: 1,330 mm, plate width: 1,400 mm, Technical Data: Size of platens 1500x3400mm Useful surface oft he tray 1330x3240mm Maximum size of boards 1250x3150 Specific pressure max 6bar Total press power max 3078kn Number of pistons 6 Diameter of pistons D 145/250mm Filling of hyfraulic oil approx. 200 Liter Max. Operating termperature 140o C Weight of press approx. 14 000kg Load on foundation approx. 32N/cm2 PNEUMATIC: Air consumption press With 4 bar forming pressure approx. 950 Nl/cycle Air consumption pin system maximum 1800 Nl/cycle Required air pressure max. 6 bar Quality of compressed air DIN ISO 8573-1 Klasse/grade Djdpfeuzgnpox Af Iecn Pressure dev point: 4 Maximum particle size: 3 Maximum oil content: 3 ELECTRICKS Connected load E1: 61KW Nominal current: 115 A Supply fuse: 125 A

Year of construction: 1991, condition: excellent (used), Punching machine Presta Eisele HPS 120 Dsdpfx Ael H Hyqjf Iecn

Year of construction: 2015, condition: new, Press the door lignum-EVERT JOHANSON TPBH 2300X1300 Press bonding framework of internal and external doors " Companies Lignum-Evert Johanson --- pneumatic-hydraulic press bonding size maximum dimensions: Length 2330 mm Width 1330 mm adjustable working pressure and the size of the door bonded hardware give one year warranty Dsdpfx Ascczuqof Iocn

Condition: used, Pujolas Ham Press Dodpfxewd Nufe Af Ijcn Model PF 4004

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, total height: 4,300 mm, ram adjustment: 100 mm, installation height: 500 mm, table height: 1,000 mm, total width: 2,200 mm, table length: 1,400 mm, pressing force: 200 t, control cabinet width: 2,000 mm, stroke distance: 160 mm, ram stroke: 160 mm, clearance between the columns: 1,450 mm, sheet width: 1,100 mm, distance between side stands: 400 mm, overall weight: 27,000 kg, height adjustment type: electric, space requirement height: 4,500 mm, space requirement length: 2,200 mm, space requirement width: 1,800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolyzers. hydrogen electrolyzers. The press is also suitable for (smooth) fineblanking, stroke rate 1 - 70 /min. Dedjt Nf Agjpfx Af Iscn Eccentric loads are also possible without any problems thanks to 4 connecting rod rams. It is also not possible for the press to jam. The press is completely overhauled and supplied with a new Siemens S7 control system.