Used Preservation Facility for sale (3,249)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor Hjdpfjytpbiox Aitsnu • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: ready for operation (used), functionality: fully functional, Sérifroid SG900 Twin Tunnel Freezer The Sérifroid SG900 Twin tunnel freezer enables continuous freezing with high consistency while preserving product quality. It is designed for production facilities seeking a stable throughput and precise temperature control. Thanks to its dual-tunnel architecture, air circulates uniformly around the products, ensuring controlled temperature reduction from the beginning to the end of the cycle. This control improves the final texture, minimizes water loss, and ensures a consistent appearance for every batch. Hodpfx Aexr Al Deitsnu The stainless steel conveyor belt ensures smooth product flow. Additionally, the 80 mm polyurethane foam insulation minimizes heat loss, improving energy efficiency. The system operates with CO₂ (R744), a refrigerant that delivers high thermal performance while meeting environmental standards. The SG900 Twin also features automated regulation to maintain freezing parameters without constant monitoring. The operator only needs to intervene to adjust recipes or throughput, streamlining day-to-day operation. Defrosting is quick and pre-programmed; a 20-minute cycle every 8 hours is sufficient to keep the tunnel operating at peak efficiency. This reduces downtime and supports continuous operation. Furthermore, the freezer integrates easily into existing processing lines—whether in bakeries, charcuterie, or ready meal production. Process consistency boosts overall yield while ensuring final product quality. The SG900 Twin is thus an excellent investment for facilities aiming to increase capacity and achieve stable, repeatable freezing results every day. Technical specifications: - Freezing capacity: 250 kg/h - Tunnel length: 2 × 9.6 m (19.2 m) - Usable width: 2.6 m - Insulation: 80 mm polyurethane - Refrigerant: CO₂ (R744) - Cooling capacity: 35 kW - Evaporation temperature: –40°C - Defrost: electric, ≤20 min / 8h

Condition: ready for operation (used), functionality: fully functional, The Multivac R230 thermoforming machine is a packaging system designed to meet industrial requirements for thermoformed packaging, making it particularly suitable for the food and professional sectors. It is capable of producing precise packaging using either semi-rigid or rigid bottom films and flexible top films, ensuring excellent sealing and optimized material usage. Moreover, the machine is equipped with advanced features such as gas flushing or vacuum, which improve the preservation of sensitive products. As a result, it is commonly used for packing meat, cheese, prepared meals, or products that require modified atmosphere packaging. The Multivac R230 is engineered to integrate into production lines, typically with an overall length between 5,800 and 7,800 mm, a width around 1,000–1,100 mm, and a height of approximately 2,050–2,150 mm, depending on the discharge configuration and associated accessories. Despite its industrial size, the machine maintains a compact footprint suitable for existing facilities. Its ability to handle various film formats and molds makes this thermoforming machine versatile for different tray or container sizes. Drive power varies depending on the version and options; several listings indicate installed power ranges from around 8 kW to 14 kW, with a 400 V three-phase power supply (3+N, 50 Hz), ensuring energy efficiency for high-throughput operations. Therefore, the Multivac R230 remains a preferred choice for operators seeking a reliable machine capable of continuous cycles without loss of consistency or precision. Its robust stainless-steel construction and compatibility with labeling or printing systems further support integration into modern packaging lines. Technical specifications: Dimensions (L x W x H) in mm: (612 , 130 , 213 mm) Packing formats: multiple, depending on tooling Hnedpex Itagofx Aitou Functions: thermoforming, vacuum, gas flushing, sealing Machine length: approx. 6 to 8 m depending on configuration Electrical supply: 400 V – three-phase – 50 Hz Installed power: approx. 5 kW Construction: industrial stainless steel

Condition: ready for operation (used), functionality: fully functional, The Lutetia T1 tumbler offers a reliable and high-performance solution for processing facilities seeking a precise machine for mixing and marinating controlled batch sizes. With a capacity of up to 400 kg of meat and brine, it supports consistent production volumes while ensuring excellent uniformity. Its vacuum operation promotes rapid and even ingredient penetration, so recipes benefit from enhanced consistency and product quality remains stable from batch to batch. This leads to improved process control right from the initial operations. Furthermore, the slow and continuous drum rotation minimizes mechanical stress on the product. The consistent motion helps preserve fiber integrity and reduces the risk of product damage, resulting in a uniform and visually appealing texture. The drum's internal design ensures smooth movement of the batch, making each mixing cycle repeatable and safeguarding daily output. This design is particularly suitable for processes where dosing precision and product integrity are critical. The stainless steel construction ensures outstanding durability and optimal hygiene. In addition, the machine is designed for easy cleaning and maintenance. Its compact dimensions allow straightforward integration into workshops with limited space, fitting seamlessly into existing production lines without major modifications. With a usable volume of 950 litres, robust build, and proven design, the Lutetia T1 tumbler is a relevant choice for processors seeking reliability, consistent production, and optimized processing times. Technical specifications: Meat + brine capacity: 400 kg Usable volume: 950 L Operating type: Rotating drum under vacuum Discharge: Frontal opening Hodpsx Ifylofx Aitenu Overall length: 2150 mm Overall width: 1230 mm Drum diameter: 972 mm Unladen weight: 800 kg

Condition: used, functionality: fully functional, total length: 48,000 mm, total height: 6,464 mm, Year of construction: 2019, 2019 FONG KEE THREE-LAYER CO-EXTRUSION FLAT SHEET LINE Up to 2,100 mm net sheet width | 7,000 operating hours Direct owner sale | Can be seen running by appointment Company-owned Fong Kee sheet extrusion line, offered for sale directly by the owner. The line has been used in our own production and remains fully assembled at our facility in Torbalı, İzmir, Türkiye. Originally specified for flat sheet production for furniture applications, the line offers multiple material and layer options. A running demonstration can be arranged in advance for interested buyers. MACHINE OVERVIEW Manufacturer: FONG KEE INTERNATIONAL MACHINERY CO., LTD., Taiwan Model: TSE-90/150/150-2400 Year of manufacture: 2019 Operating hours: 7,000 h Type: Three-layer co-extrusion flat sheet line Layer configurations: A/B/A or A/B/C Processable materials: PET, PMMA, ABS, PS (HIPS / GPPS), PC and PP The material options and layer configurations listed above have been confirmed through our own production experience. PRODUCTION SPECIFICATIONS Net trimmed sheet width: 1,500–2,100 mm Die width: 2,300 mm Specified sheet thickness: PET: 0.3–0.8 mm PMMA/ABS: 0.6–0.8 mm Specified maximum output: Up to 1,000 kg/h, depending on resin and sheet thickness Specified operating speed: 3–10 m/min EXTRUSION AND MELT DELIVERY Three vented extruders: Extruder A: Ø90 mm, L/D 35:1 Extruder B: Ø150 mm, L/D 32:1 Extruder C: Ø150 mm, L/D 32:1 Three hydraulic screen changers Three MAAG melt gear pumps Dynisco melt-pressure instrumentation EDI Ultraflow I three-layer feedblock EDI Ultraflex HRC 100 Fastgap die, 2,300 mm CALENDER AND SURFACE FINISHES Horizontal three-roll mirror-polishing stack Roll diameters: 400 / 600 / 600 mm Roll face width: 2,400 mm Mirror-finished, hard-chrome-plated rolls Multi-zone roll temperature control Additional dedicated matte calender roll included In our own production, we have achieved both high-gloss / mirror optical-grade surfaces and anti-glare / matte finishes on this line. DOWNSTREAM EQUIPMENT Dual-sided protective masking film application unit Haul-off unit Automatic guillotine cutting unit Conveyor unit Hjdpjzzdnfjfx Aitjnu Automatic vacuum stacking unit Two-drum turret winder with automatic tension control ELECTRICAL AND AUTOMATION Siemens SIMATIC ET 200SP PLC Siemens 19-inch and 12-inch Comfort HMI touchscreens Siemens SINAMICS G120 drives Schneider Electric main electrical switchgear Air-conditioned electrical cabinets INSTALLATION AND CONDITION Location: Torbalı, İzmir, Türkiye Overall line length: Approximately 48 metres Condition: Excellent used condition, fully assembled and preserved indoors Current status: Currently idle; can be demonstrated running by prior arrangement Reason for sale: Production facility reconfiguration Please refer to the technical layout drawing for the detailed equipment arrangement, installation dimensions and utility information. INSPECTION AND COMMERCIAL TERMS The complete line is available for on-site inspection and can be seen running by prior arrangement. Delivery terms: EXW Torbalı, İzmir, Türkiye. Reasonable offers will be considered, taking into account the overall commercial terms of the transaction. Detailed technical specifications, the line layout drawing, photographs and an operating video are available for review.

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Hodpfx Aisxv Dz Istonu Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: new, Year of construction: 2012, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2266, table width: 200 mm, 4th and 5th Axis Rotary Table LCM ITALY BRC-200 (NEW / NEVER USED IN PRODUCTION) General Description: Due to changes in production requirements and reorganization of work processes, we are selling a 2-axis rotary and tilting table (4th and 5th axes) manufactured by LCM ITALY, model BRC-200. The table was purchased as an accessory for an ISPER HSP643 machining center and was only installed and tested during the machine acceptance phase. Immediately after functional verification, it was disassembled and stored in the warehouse. The equipment is completely new, has never been used in production, and is perfectly preserved. Technical Specifications and Condition Manufacturer: LCM ITALY Model: BRC-200 Type: Integrated 4th and 5th axis rotary table for CNC machining centers Original machine: ISPER HSP643 machining center Testing CNC: Heidenhain TNC 530 Condition: New / Unused (only acceptance testing) Documentation: Wiring diagrams and complete original technical documentation from the manufacturer are provided. Support and Interfacing Hjdpfx Aisz Hvg Ustjnu The manufacturer, LCM ITALY, is available to provide direct technical support for interfacing, configuration, and any installation/restoration of the table, even on a different CNC or machine. Sales Conditions Availability: Immediate Inspection: Can be viewed in person at our facility by appointment.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Hsdpfexl Dy Nex Aitonu Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We are offering a complete, integrated robotic CNC turning cell consisting of two DOOSAN vertical CNC turning centers and one KAWASAKI ZX-165U industrial robot. The machines and robot are exceptionally well preserved, regularly maintained and currently operating in our production facility in a two-shift environment. The robotic cell enables automated workpiece handling, loading and unloading between the CNC machines. This is an opportunity to acquire an existing production automation system rather than sourcing individual machines and commissioning a new integration. 1. Complete cell – Included equipment • 1 × DOOSAN VT450TM-2SP CNC turning center • 1 × DOOSAN VT750TM-2SP CNC turning center • 1 × KAWASAKI ZX-165U industrial robot and robot control cabinet • Installed robot gripper / workpiece handling equipment • Safety fencing and protective enclosure • Robot-to-machine communication interfaces • Associated electrical and pneumatic automation components • Workpiece handling / storage stations and chip conveyors 2. Condition, inspection and advantages Both CNC machines and the Kawasaki robot are fully operational, regularly maintained and currently used in our manufacturing facility in Slovenia. The complete cell can be inspected under power and demonstrated during production by prior appointment. Hnedjz Rqqqjpfx Aitou • Complete, existing robotic CNC turning solution • Two heavy-duty Doosan vertical turning centers with FANUC CNC controls • Driven tools and C-axis on both machines • Automated workpiece handling and reduced manual intervention • Excellent condition; regularly maintained • Live inspection and test run available 3. Typical applications Automated machining of flanges, bearing rings, gear components, housings, brake discs, large rotational components and other medium- to heavy-duty industrial workpieces, including steel and cast-iron parts. 4. Sales information The complete robotic cell is offered for sale as one integrated system. Additional photographs, video and technical information are available upon request. Inspection and test run by appointment

Condition: ready for operation (used), functionality: fully functional, The Lutetia T0 tumbler is specifically designed for processing facilities seeking a compact and reliable solution for vacuum mixing and marinating of small batches. Firstly, it offers the same technological principles as larger industrial models, while remaining perfectly suited for pilot runs, artisanal production, or recipe testing. This ensures homogeneous and controlled brine penetration, guaranteeing consistent quality from the very first cycles. In addition, vacuum operation helps to improve product integrity and deliver uniform results. Furthermore, the drum’s slow rotation ensures gentle handling of raw materials. This gradual movement minimizes mechanical stress on the product and preserves fiber structure, so appearance and texture remain consistent. The drum’s internal geometry promotes smooth circulation of the batch, improving repeatability of cycles and ensuring process reliability even across successive batches. In addition, the food-grade stainless steel construction meets the strict hygiene standards of the food industry. It offers excellent resistance to corrosion and wear, while facilitating cleaning and minimizing downtime between production runs. As a result, the tumbler is easy to operate and readily available for daily use. Its compact footprint also enables easy integration into workshops where space is limited. All in all, the Lutetia T0 is a smart choice for professionals aiming to optimize their vacuum marinating process without oversizing their production setup. It strikes an excellent balance between precision, reliability, and compactness, making it a strategic tool for industrial trials, small batch production, or development-phase operations. Technical specifications: Dimensions (L × W × H): 1,430 × 880 × 2,000 mm Meat + brine capacity: 150 kg Total drum volume: 350 L Drum diameter: 660 mm Operation: Vacuum Mixing type: Slow drum rotation Hnodpfxox Ngwne Aitou Construction: Food-grade stainless steel Empty weight: Approx. 200 kg

Condition: ready for operation (used), functionality: fully functional, The Lutetia T1 tumbler is designed for processing facilities seeking a reliable solution for vacuum mixing and marinating at intermediate volumes. Firstly, it enables homogeneous brine penetration thanks to vacuum operation, which enhances product integrity and consistency across recipes. As a result, each batch is tightly controlled, even during repeated production cycles. Additionally, this tumbler is perfectly suited to operations where final product quality is just as critical as consistent industrial output. Furthermore, the slow rotation mechanism ensures gentle handling of raw materials. The gradual movement minimizes mechanical stress and preserves the structure of the meat. Consequently, losses are reduced and the visual appearance remains uniform. In addition, the drum geometry promotes optimal product circulation, enhancing cycle repeatability and reducing batch-to-batch variation. This provides operators with greater peace of mind and accuracy. Moreover, its stainless steel construction meets the stringent requirements of the food industry. This guarantees outstanding resistance to wear and corrosion while simplifying cleaning operations, thereby reducing downtime. Simultaneously, accessible critical areas facilitate day-to-day maintenance, ensuring long-term machine availability. Hodpfx Aiex Nf D Hstenu The Lutetia T1 is a strategic choice for sites wishing to optimize their marinating process without oversizing the installation. It offers an ideal balance between footprint, effective capacity, and vacuum performance. For manufacturers seeking reliability, consistency, and product quality, this tumbler stands as a proven and long-lasting solution. Technical specifications: - Meat + brine capacity: 400 kg - Usable volume: 950 L - Operating principle: Rotating vacuum drum - Discharge: Frontal mouth - Overall length: 2,150 mm - Total width: 1,230 mm - Drum diameter: 972 mm - Unladen weight: 800 kg

Condition: used, This listing is for a Thermo Scientific TSX40086V Ultra Low Temp Freezer. The unit is in full working condition and is ready for immediate release. This unit is supplied with temperature sensors The Thermo Scientific TSX40086V is an ultra-low temperature freezer designed to provide reliable, sustainable, and energy-efficient storage for laboratory samples. With advanced technology and robust security features, it ensures the safety and preservation of valuable materials. Key Features: Capacity and Dimensions: Storage Capacity: Holds up to 400 2-inch boxes, offering ample storage for a variety of sample types. Compact Design: Exterior dimensions of 37.6 × 28.3 × 78 inches, making it suitable for diverse laboratory spaces. Temperature Range and Performance: Temperature Range: Maintains ultra-low temperatures from -50°C to -86°C, ensuring optimal sample preservation. Temperature Stability: Less than 5°C variation throughout the cabinet space for consistent storage conditions. Warm-Up Time: Long warm-up time from -50°C to -80°C (approximately 5.05 hours), ensuring extended protection during power interruptions. Energy Efficiency and Sustainability: Energy Star Certified: Reduces energy consumption without compromising performance, saving on operational costs. V-Drive Technology: Adjusts to user patterns to optimize energy use and reduce HVAC demands. Eco-Friendly Construction: Manufactured in a zero-waste facility with natural refrigerants and water-blown foam insulation. Compliant with U.S. EPA SNAP and EU F-Gas regulations. Connectivity and Monitoring: DeviceLink Technology: Enables real-time monitoring of system status and sample temperature via mobile and web applications for convenience and peace of mind. Safety and Security: Advanced Security Features: Includes alarm settings, padlock-compatible doors, and optional access card entry for enhanced protection. Benefits: Hjdsxxycmjpfx Aitjnu Sustainability: Manufactured with environmentally responsible practices and materials, making it a sustainable choice for labs aiming to reduce their carbon footprint. Energy Savings: V-Drive Technology and ENERGY STAR certification significantly reduce operational costs by optimizing energy consumption. Sample Protection: Long warm-up time and consistent temperature stability protect valuable samples even during power outages or fluctuations. Convenient Monitoring: Remote monitoring through Device Link ensures that system status and temperature can be checked anytime, anywhere. Flexible Storage: Accommodates a wide range of sample types with its large capacity and uniform temperature distribution. Applications: The Thermo Scientific TSX40086V is ideal for laboratories requiring dependable ultra-low temperature storage for critical materials, such as: Biomedical Research: Long-term storage of biological samples, DNA, RNA, and proteins. Clinical Laboratories: Preservation of vaccines, plasma, and other temperature-sensitive specimens. Pharmaceuticals: Storage of compounds, drugs, and reagents. Industrial Research: Safe storage of raw materials and chemicals.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: Multiple on request, Continuous Potato Peeling Line – Tong Engineering & Sormac Equipment This continuous potato peeling line combines reliable Tong Engineering handling equipment with efficient Sormac peelers to create a complete solution for high capacity potato processing. Designed for consistent product flow and dependable performance, the system is well suited to processors looking to streamline their peeling operation. The equipment moves potatoes smoothly from cleaning and peeling through inspection, treatment, and final product safety checks. With trusted machinery from Tong and Sormac, this line delivers both efficiency and durability in demanding production environments. Equipment Included Tong Engineering De-Stoner The process begins with a Tong de-stoner, which removes stones, soil, and heavy debris from incoming potatoes. This stage protects downstream equipment and ensures cleaner product enters the peeling process. Two Sormac Continuous Peelers The line includes two Sormac continuous peelers designed for high capacity peeling while minimising product loss. These machines efficiently remove potato skins while maintaining consistent throughput for industrial potato processing operations. Tong Engineering Surge Tank A Tong surge tank regulates product flow between processing stages. This buffer helps maintain a steady supply of potatoes through the system and prevents bottlenecks during production. Tong Roller Inspection Table The Tong roller inspection table allows operators to visually inspect peeled potatoes and remove defects. Rotating rollers spread the product evenly, improving visibility and making quality control easier. Tong Dip Tank with Dosing Unit A Tong dip tank with integrated dosing unit allows potatoes to be treated with anti-browning or preservation solutions. This step helps maintain product appearance and supports shelf life after peeling. Hodjytn H Djpfx Aitonu Loma IQ3S Metal Detector The final stage of the continuous potato peeling line is a Loma IQ3S metal detector, which checks the finished product for metal contamination and helps meet food safety standards. Key Benefits Complete continuous potato peeling line for commercial processing Combination of Tong Engineering handling equipment and Sormac peelers Designed for efficient stone removal, peeling, inspection, and treatment High throughput suitable for industrial potato processing Integrated metal detection for product safety Reliable equipment built for demanding production environments Suitable Applications This equipment is ideal for: Potato processing facilities Fresh produce packing operations Ready meal manufacturers Vegetable processing plants Enquiries If you are interested in this continuous potato peeling line, please get in touch for further information, pricing, and availability. The system offers a dependable solution for large-scale potato processing. Five individual lines available We hold a wide range of new and used food processing machinery in stock, some of which may not be showing on our website. If you have any additional requirements please get in touch

Condition: ready for operation (used), functionality: fully functional, The Lutetia T5 tumbler stands out as an industrial solution designed for high-volume production sites requiring precise control of mixing and vacuum marinating processes. Firstly, its vacuum operation optimizes brine absorption and improves the diffusion of ingredients deep into the product. As a result, sensory quality improves while recipe consistency remains stable over extended cycles. Additionally, this technology directly contributes to better product integrity after processing. Furthermore, the slow, controlled rotation of the drum ensures gentle handling of raw materials. The gradual movement minimizes mechanical stress and preserves meat structure, even with large batch loads. Consequently, yield loss is reduced and product appearance remains uniform. Moreover, the drum’s internal design promotes smooth circulation of the mass, enhancing process repeatability and securing productivity. The food-grade stainless steel construction ensures exceptional robustness and durability suited to intensive industrial environments. On the one hand, it offers excellent resistance to corrosion and wear. On the other, it simplifies cleaning and maintenance operations. This helps reduce downtime and maximizes machine availability. At the same time, its compact footprint allows for seamless integration into existing production lines. In summary, the Lutetia T5 meets the needs of processors seeking a reliable, high-performance tumbler specifically engineered for large volumes. It provides a strategic tool to optimize yields, secure consistent product quality, and maintain stable performance over the long term. Therefore, it represents a relevant investment for facilities aiming for continuous production with stringent quality control. Technical specifications: Dimensions (L × W × H): 3,500 × 2,050 × 2,450 mm Meat + brine capacity: 3,800 kg Total drum volume: 6,750 L Drum diameter: 1,950 mm Hsdpfx Aisyc Uqbjtsnu Operation: Vacuum Mixing type: Slow drum rotation Construction: Food-grade stainless steel Empty weight: approx. 3,000 kg

Condition: ready for operation (used), functionality: fully functional, The Lutetia T5 tumbler is designed for processing facilities seeking homogeneous and repeatable mixing on large volumes. It ensures even distribution of ingredients while preserving the product structure. As a result, quality remains consistent from batch to batch, securing the manufacturing process. Additionally, the tank design promotes controlled product flow to minimize poorly processed areas. This tumbler integrates easily into existing production environments, as its architecture is engineered for intensive use. Its robust construction ensures excellent stability during operation, even under heavy loads. Furthermore, the accessibility of key areas simplifies cleaning and maintenance operations, reducing downtime and improving daily machine availability. Hnedpfsydaftex Aitsu Refurbished by Europ'Equipement, the Lutetia T5 tumbler undergoes a rigorous check of all mechanical and functional elements. Users benefit from a reliable piece of equipment, ready for operation without major modifications. Refurbishment also allows for controlled investment while maintaining a high performance level. Consequently, this solution reflects a sustainable approach focused on reliability and long-term cost reduction. The Lutetia T5 is particularly suitable for applications involving meat processing and value-added products that require consistent and regular mixing. It also offers excellent operational flexibility to accommodate various recipes and production requirements. Therefore, this tumbler is an optimal choice for industrial users aiming to enhance their processes while ensuring quality, consistency, and safety. Technical specifications: Meat + brine capacity: 3,800 to 4,000 kg Drive: two motors Control: programmer with variable speed drive Dimensions (L × W × H): 3,500 × 2,050 × 2,450 mm Weight: 3,000 kg Tank volume: 6,750 L

Condition: ready for operation (used), functionality: fully functional, The Vemag HP10E piston filler meets the needs of processing facilities seeking a high-performance solution for dosing and portioning meat products. It ensures consistent and precise filling, maintaining constant product quality across production runs. As a result, weight deviations are minimized and overall process efficiency is improved. Additionally, the screw technology guarantees gentle handling of the product structure, preserving both appearance and texture. This filler can be easily integrated into an existing production line, as its architecture is compatible with various downstream equipment. The touchscreen interface simplifies adjustments and cycle control, enhancing operator responsiveness. Furthermore, the high throughput supports demanding production rates without sacrificing accuracy, directly contributing to optimization of factory performance. When Europ'Equipement offers a used Vemag HP10E filler, their team inspects all mechanical, electrical, and functional components, ensuring the machine is reliable and ready to operate. Refurbishment also helps control investment costs while maintaining performance levels that meet industrial standards, making this solution both sustainable and economically sound. The Vemag HP10E is suitable for applications involving further processed meats or products that require rapid and reproducible portioning. Its ergonomic design supports daily operation and minimizes operator strain. Overall, this filler represents a smart choice for processors aiming to secure their production process while increasing productivity. Technical Specifications: Hnedpfx Ajyghrmsiteu Year of manufacture: 2016 Operating mode: vacuum Installed power: 11 kW SCCR: 5 kA rms Filling capacity: up to 5,700 kg/h Portioning throughput: up to 820 portions/min Technology: screw conveyors for precise dosing Interface: 12″ touchscreen Equipment: adjustable feet 83+PNQB9

Condition: like new (used), Set of 3 Industrial Vacuum Cookers – Stainless Steel Set of 3 industrial vacuum cookers made of stainless steel, designed for cooking, heating, and processing food products under controlled vacuum conditions. The set consists of three process vessels installed on a common frame with an elevated work platform, providing a robust solution for industrial batch production. Vacuum processing allows for cooking and concentration operations at reduced pressure, enabling operation at temperatures lower than those used in conventional atmospheric processes, depending on the product and recipe. Hnjdpfxozwv Ipe Aitju MAIN FEATURES -Quantity: 3 vacuum cookers -Type: Industrial vacuum cooking/processing system -Application: Cooking, heating, and processing of food -Robust construction in stainless steel -3 independent process vessels -Configuration for batch production -Integrated piping and valve system -Vacuum processing -Bottom product discharge -Individual drive systems -Inspection/access hatches -Stainless steel work platform -Guardrails and access system -Designed for professional food processing environments -Integrable into complete production lines APPLICATION The system is designed to process food products in closed vessels under vacuum conditions. Working at reduced pressure allows the cooking and heat treatment conditions to be adapted to the characteristics of each product. The configuration of three vessels also provides high flexibility for managing different batches or production stages within the same facility. Depending on the product, it can be used for: Vacuum cooking Heating and heat treatment Concentration Mixing and homogenization Reduction of liquid products Sauce production Processing of fruits and vegetables Preparation of fillings and formulated products APPLICATIONS Especially suitable for food manufacturers, sauce and condiment producers, fruit and vegetable processors, prepared meal manufacturers, and industrial kitchens. Depending on its configuration, it can be used to produce sauces, jams, preserves, fruit preparations, vegetable products, fillings, concentrates, and prepared meals. The configuration of 3 industrial vacuum cookers offers a particularly interesting solution for facilities that require production flexibility and simultaneous processing of different batches. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, functionality: fully functional, FRIGOSCANDIA FF-2-RMA Linear IQF Freezing Tunnel FRIGOSCANDIA FF-2-RMA linear IQF freezing tunnel, designed for the rapid and continuous freezing of food products in industrial production lines. Manufactured by FRIGOSCANDIA, a leader in industrial freezing technology, this equipment uses a rapid freezing system with controlled cold air circulation, allowing for a rapid reduction in product temperature as it moves through the tunnel. IQF (Individual Quick Freezing) technology is especially suitable for products that require rapid freezing, promoting the preservation of their characteristics and, depending on the product and process, allowing the units to remain separate during freezing. MAIN FEATURES -Manufacturer: FRIGOSCANDIA -Model: FF-2-RMA -Type: Linear IQF freezing tunnel -Continuous rapid freezing system -IQF technology – Individual Quick Freezing -Forced cold air circulation -Continuous product transport -Industrial design for continuous operation -Insulated freezing chamber -Integrated control system -Robust construction for industrial use -Designed for high-production lines -Integrable into food processing facilities -Suitable for different food products depending on the configuration Hnsdpfx Aijwn Hd Sotsu FREEZING PROCESS The FRIGOSCANDIA FF-2-RMA is designed to freeze product continuously as it moves through the inside of the tunnel. The product enters the freezing zone and is subjected to intensive circulation of low-temperature air, achieving rapid heat transfer until the required freezing conditions are reached. The linear system facilitates its integration between the preparation stages and subsequent storage or packaging operations of the frozen product. It can be integrated with: Product feeding systems Conveyors and elevators Preparation and processing lines Scalding and cooling equipment Inspection systems Weighing and dosing equipment Packaging machines Complete frozen product lines APPLICATIONS Especially suitable for industries of frozen vegetables, fruits, fish and seafood, meat products, ready meals and other frozen foods that require a fast and continuous industrial process. The FRIGOSCANDIA FF-2-RMA is a particularly interesting solution for plants looking to incorporate or expand their industrial IQF freezing capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, Discover the LUTETIA T3 Churn, an essential piece of equipment to enhance your marinating processes and improve the quality of your meats. Its vacuum system accelerates flavor penetration while preserving the hydration of the ingredients. Furthermore, its stainless steel construction ensures optimal hygiene and quick maintenance. Furthermore, its custom-designed dimensions allow for seamless integration into different production facilities without the need for complex configurations. This gives you greater flexibility when you want to expand your product range. Then, the meat and brine capacity, estimated at 1,450 kg, is a real asset for processing large volumes without sacrificing mixing consistency. With this churn, you'll also reduce wasted time, as its user-friendly interface makes it easy to learn. Furthermore, its dynamic operation limits lump formation, enhancing the final presentation of your preparations. Finally, this robust machine can withstand high production rates and offers a long service life, even in an intensive environment. In addition, its airtight lid maintains a stable internal climate and prevents external contamination, a key factor in the food industry. Contact us now to discover how the LUTETIA T3 Churn can enhance your processing operations. You'll benefit from superior performance and precise recipe control, two essential elements for satisfying demanding customers. Hnsdpsv Uxatjfx Aitju Technical specifications: Dimensions: L 2782 mm × W 1450 mm × H 2020 mm Capacity (meat + brine): ~1450 kg Operation: Vacuum-sealed for rapid marinating Structure: Stainless steel for enhanced hygiene Weight: ~1500 kg (estimated) for greater stability t7jlRcke

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation Hedpfev Da Dljx Aitsnu - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: excellent (used), functionality: fully functional, The FDS 3000-1 Trio is an automatic fish skinning machine designed for the gentle skinning of soft, trimmed whitefish fillets and fish portions of uneven thickness. This brand’s machine has been used for years in fish processing plants around the world as a proven solution where high yield and minimal damage to the raw material are essential. Technical Specifications Manufacturer: TRIO Model: FDS 3000-1 Capacity: 40–120 fillets/min (depending on fillet size) Skinning depth: 0–10 mm Feeding method: manual Skinning method: freezing the fillet on a chilled drum; operates without stretching the skin or flesh Supported species: including hake, pollock, blue whiting, and whitefish of varying thicknesses How does the Trio FDS 3000-1 skinning machine work? The operating principle of the FDS 3000-1 is based on a unique method of “freezing” the fillet on a chilled drum. The fillet is manually fed onto the surface of the rotating drum, where—thanks to the low temperature, the force of gravity, and light pressure—it is stabilized in a flat position without compressing or excessively straining the tissue. Only in this position does the knife remove the skin, leaving as much valuable meat as possible. This method allows for shallow, controlled skinning—with a cutting depth ranging from 0 to 10 mm—which results in less discoloration, fewer skin residues on the fillet, and higher end-product yield compared to the brand’s traditional, older models. Key Advantages of the Trio FDS 3000-1 The FDS 3000-1 skinner is particularly effective when the raw material is delicate or has uneven thickness—the gentle skinning method on a cold drum reduces the risk of fillet damage and preserves its structure even when processing thawed, previously frozen products. The machine’s capacity, ranging from 40 to 120 fillets per minute depending on the size of the raw material, allows the operating speed to be adjusted to the characteristics of a specific production line. The machine’s design ensures stable, consistent skinning quality regardless of the fillet’s shape and thickness, which reduces the need for manual adjustments and speeds up subsequent processing stages. The simple, manual method of feeding fillets means that operating the machine does not require extensive staff training. Applications and supported fish species The Trio FDS 3000-1 is used for skinning soft white fish fillets and portions of uneven thickness, including previously frozen and thawed raw material. The machine is well-suited for processing species such as hake, pollock, blue whiting, and other white fish that require gentle handling during processing. Thanks to its flexibility in skinning depth, the FDS 3000-1 is suitable both for producing fillets intended for further processing (e.g., breading, freezing, smoking) and for production lines focused on maximizing the yield of high-value raw material. At BMG Trade, we specialize in the sale of machinery for the food industry, including professional fish-processing equipment such as Trio skinning machines. If you are looking for a Trio FDS 3000-1 skinning machine—whether new or a proven, used machine in good working condition—please contact us. We will help you select the right model for your product range and production scale, and we will also advise you on transportation, service, and commissioning the machine at your facility. Hedpfxezlhihe Aitenu Contact us to find out about current availability and pricing for the Trio FDS 3000-1.

Condition: ready for operation (used), functionality: fully functional, Discover the LUTETIA T3 Churn, an essential piece of equipment to enhance your marinating processes and improve the quality of your meats. Its vacuum system accelerates flavor penetration while preserving the hydration of the ingredients. Furthermore, its stainless steel construction ensures optimal hygiene and quick maintenance. Furthermore, its custom-designed dimensions allow for seamless integration into different production facilities without the need for complex configurations. This gives you greater flexibility when you want to expand your product range. Then, the meat and brine capacity, estimated at 1,450 kg, is a real asset for processing large volumes without sacrificing mixing consistency. With this churn, you'll also reduce wasted time, as its user-friendly interface makes it easy to learn. Furthermore, its dynamic operation limits lump formation, enhancing the final presentation of your preparations. Finally, this robust machine can withstand high production rates and offers a long service life, even in an intensive environment. In addition, its airtight lid maintains a stable internal climate and prevents external contamination, a key factor in the food industry. Contact us now to discover how the LUTETIA T3 Churn can enhance your processing operations. You'll benefit from superior performance and precise recipe control, two essential elements for satisfying demanding customers. Technical specifications: Dimensions: L 2782 mm × W 1450 mm × H 2020 mm Capacity (meat + brine): ~1450 kg Operation: Vacuum-sealed for rapid marinating Structure: Stainless steel for enhanced hygiene Weight: ~1500 kg (estimated) for greater stability Hnodpfx Aiov Uxfvotsu Ub+82nQW

Year of construction: 2012, condition: used, Three-story, modular container system manufactured by PLATAL Mobilsysteme GmbH in 2012, previously used as a school building with classrooms, ancillary rooms, and sanitary facilities. Manufacturer: PLATAL Mobilsysteme GmbH Year of manufacture: 2012 Construction: Modular container system Previous use: School and sanitary facilities Overall dimensions (L × W × H): approx. 36,000 × 15,760 × 10,200 mm Floors: 3, identical in construction Total number of container modules: 72 units Container module type 1: 36 units, each 3,000 × 6,500 mm Container module type 2: 36 units, each 3,000 × 9,260 mm Module height: 3,400 mm Sanitary areas: 3, one per floor Hedpfx Aoz N Ex Tsitsnu Exterior staircases: 2 steel exterior staircases with grating steps and landings Equipment: Windows with exterior roller blinds, radiators, suspended grid ceilings, lighting, electrical installations, and sanitary areas Room layout: Classrooms, corridors, ancillary rooms, and sanitary areas

Condition: excellent (used), Isothermal Aseptic Tank BIO-INOX 18,000 L – Stainless Steel BIO-INOX 18,000-liter aseptic tank with a double bottom and thermal insulation, designed for the storage and intermediate preservation of liquid and semi-liquid food products under controlled hygienic conditions. Its large-capacity vertical configuration and stainless-steel construction allow it to be integrated into aseptic processing industrial facilities, acting as a storage tank or buffer between thermal treatment and filling stages. The isothermal design helps limit temperature variations of the product during its stay in the tank, while its aseptic configuration is designed for processes where it is necessary to preserve the hygienic conditions of the previously treated product. Hnodpjzxccvofx Aitou MAIN FEATURES -Manufacturer: BIO-INOX -Type: Isothermal aseptic tank -Capacity: 18,000 liters -Vertical configuration -Double bottom -Stainless steel construction -Isothermal / thermally insulated design -Prepared for aseptic storage -Large storage capacity -Sanitary product connections -Stainless steel support legs -Designed for continuous industrial processes -Suitable as a buffer tank / intermediate storage -Integrable into aseptic processing and filling lines -Hygienic construction for the food industry APPLICATION The 18,000 L BIO-INOX is designed to receive and temporarily store processed product, maintaining it under controlled conditions before its transfer to the next stage of production. It can be used as an aseptic buffer tank between a sterilizer and a filler, providing accumulation capacity and helping to partially decouple the different stages of a process line. It can be integrated with: Aseptic sterilizers UHT systems Heat exchangers Sanitary pumps Homogenizers CIP systems Aseptic piping and valve systems Aseptic fillers Complete processing lines APPLICATIONS Particularly suitable for juice and beverage industries, fruit, tomato, puree, pulp, concentrate, sauce, and other liquid or pumpable food product processors that require intermediate storage within an aseptic process. Its 18,000-liter capacity, stainless steel construction, and isothermal configuration provide a large-capacity solution for aseptic processing and storage industrial facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), functionality: fully functional, Year of construction: 2016, This is a professional, mobile cleaning device for injection molding machines and temperature control units. It can effectively flush out contaminated and scaled channels. Upon request, an operating manual for the system can be sent by email. Features of the system: Hodpez Szn Nofx Aitenu Two-container system made of stainless steel, 1 container for descaling and container 2 for neutralizing agent. Pulsating cleaning through air impulses. Process monitoring. Reduces cooling times in injection molding by up to 40%.