Used Water Cleaner for sale (7,867)

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Djdpfjwz Scajx Albewb

Condition: like new (used), 2021, 264 operating hours, like new Dwodpfx Alsy Aguajbeb

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Dsdpfewy Ellex Albjwb

Condition: like new (used), functionality: fully functional, empty load weight: 900 kg, maximum load weight: 5,000 kg, overall weight: 6,000 kg, tire size: 300 x 80, tire condition: 100 %, Year of construction: 2025, Water tank trailer, 5000 liters - 25 km/h, equipment: for municipalities, construction sites, agriculture - wherever water is needed on site with mounted wide-distribution spreader and spray bar with nozzles Dedpfszy Dy Eox Albjwb drawbar height approx. 700 mm automatic support wheel with folding mechanism PTO pump for filling and emptying additional PTO pump for operating a high-pressure cleaner

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 210610, The PIONIER POWERvac 55 H is available for rent The POWERvac is an industrial vacuum cleaner suitable for all types of dust, shavings, oil, and water. This H-class version is designed for hazardous fine dusts regardless of MAK value, including carcinogenic and pathogenic dusts, with clean air recirculated back into the work area. Suction takes place in three stages: cyclone separation of liquids, coarse dust and shavings; fine dust separation via the PTFE-coated main/pocket filter; and a final safety filter stage for remaining fine dust. Dwjdpfx Aezy H R Telbeb The main filter uses pneumatic POWER shock cleaning during operation (no extra compressed air required), and the mechanical centrifugal separator is maintenance-free. - Motor power: 5.5 kW - Airflow: 520 m³/h - Main filter area: 22,600 cm² - Total max filter area (with safety filter): up to 47,600 cm² - Collection container capacity: 100 litres - Suitable for continuous operation

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,909 h, functionality: fully functional, machine/vehicle number: 08241380, fuel: diesel, DynaJet 500 High-Pressure Cleaner We are offering for sale a professional DynaJet 500 high-pressure washer with a diesel engine and water heating system. Technical Specifications: • Type: DynaJet 500 • Model: DY Boiler • Fuel: diesel • Power supply: 12 V • Maximum operating pressure: 500 bar • Maximum system pressure: 600 bar • Maximum flow rate: 28 l/min • Maximum temperature at high flow rate: 80 °C at 28 l/min • Maximum temperature at low flow rate: 150 °C at 8 l/min • Power: 115 kW • Year of manufacture: 2009 Machine application: This professional high-pressure cleaner is particularly suitable for: • cleaning industrial equipment and machinery, • removing dirt, grease, and deposits, • cleaning construction and agricultural equipment, • cleaning production and operational areas, • demanding industrial and maintenance cleaning. Machine condition: • The machine is complete, • functional and operational, • diesel system with heating, Dwsdpfx Aozuaftelbeb • high-pressure design up to 500 bar, • the machine is equipped with a chassis for easy handling, • sold as a fully functional unit. The machine is suitable for companies seeking high-performance professional equipment for high-pressure cleaning in industry, construction, agriculture, or service operations.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1.811-943.0, high-pressure hose length: 45 mm, pressure: 230 bar, fuel: diesel, power: 6.8 kW (9.25 HP), temperature: 95 °C, For sale is a well-maintained and fully functional Kärcher HD 1000 DE hot water high-pressure cleaner, manufactured in 2020, from our commercial cleaning business. The machine is in good used condition and is ready for immediate use. It has been thoroughly cleaned and serviced before sale. The engine oil and the oil of the high-pressure pump have been replaced, and the air filter has been cleaned. The high-pressure cleaner features a robust Yanmar diesel engine and a diesel-fired hot water generator. The high-pressure pump, engine, and hot water operation function perfectly. An operating hour meter is not installed on the machine, therefore, operating hours cannot be specified. Reason for sale: The machine is being sold solely because we have now installed an equivalent hot water high-pressure system permanently in one of our vehicles. Therefore, this mobile unit is no longer needed. Inspection and a detailed test run under operating conditions are possible and expressly encouraged after scheduling an appointment. Technical data Manufacturer: Kärcher Model: HD 1000 DE Article number: 1.811-943.0 Year of manufacture: 2020 Drive: Yanmar diesel engine Displacement: 435 cm³ Engine power: 6.8 kW at 3,600 rpm Working pressure: approx. 190 bar Max. pressure: 230 bar Flow rate: 15 l/min (900 l/h) Max. water temperature: 98 °C Burner output: 59 kW Weight: approx. 197 kg Operating hours: not readable / no operating hour meter available Extensive Kärcher accessories included Dwodpfxeztut Aj Albeb The machine is sold as a complete, ready-to-use package: * Kärcher EASY!Force Advanced high-pressure gun * High-pressure lance with pressure regulation * Kärcher EASY!Lock system * 30 m high-pressure hose * additional 15 m high-pressure hose * coupling to connect both hoses - allowing up to 45 m hose length * Rotating nozzle / rotor nozzle * Flat spray nozzle * Kärcher eco!Booster TR 50 * integrated hose reel Especially the combination of the 45 m high-pressure hose, EASY!Force Advanced, and the different nozzles makes the machine interesting for larger areas and professional applications. Maintenance performed before sale: * Engine oil replaced * High-pressure pump oil replaced * Air filter cleaned * Machine completely cleaned * High-pressure function tested * Hot water / burner function tested * Functional test performed The machine is in perfect technical condition and ready for immediate use. Suitable for, among other applications: Commercial cleaning, facade cleaning, industrial and hall cleaning, construction companies, agriculture, agricultural machinery cleaning, municipal services, and other professional high-pressure and hot water cleaning tasks. Location: 45966 Gladbeck, North Rhine-Westphalia Inspection and test run: Possible and expressly desired after prior appointment. Sale by a commercial enterprise. An invoice with VAT will be issued.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, temperature: 35 °C, operating pressure: 75 bar, energy consumption: 64 kWh, Industrial plant for the treatment and concentration of process water as well as for nutrient recovery. The plant combines a double-pass reverse osmosis (RO) system with a thermal evaporator unit and was originally developed for biogas production to recover ammonium-containing fertilizer from process water and digestate. The plant was never commissioned due to the operator's insolvency and is in a preserved condition. The system is suitable for operators from the industrial, environmental technology, or agricultural sectors who are looking for a rapidly available solution for water treatment, ZLD (Zero Liquid Discharge), or nutrient recovery. Technical data Djdpfeyr H Anox Albjwb System type: RO Double Pass + Evaporator Model: SIMPEC RO Double Pass 8000 44 8 Evaporator 57 000 Year of construction: 2020 Permeate output: Stage 1: 7.5 m³/h Stage 2: 6.7 m³/h Permeate quality:

Year of construction: 2023, condition: used, 2023 | Wheel Cleaner WEXC-13 | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41134 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Djdpfoznfdhjx Albowb 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled Djdei Hckrjpfx Albewb ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state. Dedpozmqv Hefx Albowb

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Djdpfxsxhfl Eo Albjwb Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3520191300779, operating pressure: 220 bar, input voltage: 400 V, overall weight: 85 kg, The Nilfisk MC 5M is equipped with a hose reel and a new rotary nozzle. The water pressure can be adjusted using an adjustment wheel on the high-pressure cleaner. It is extremely maneuverable, making it suitable for mobile use in everyday work. Dwjdsuwlxfopfx Albob Technical data: Pressure: 220 bar Cleaning performance: 6.2 Max. inlet temperature: 60 degrees Dimensions: 890x570x1020 (length x width x height) in mm Weight: 85

Condition: as good as new (ex-display), Year of construction: 2022, High-pressure cleaner PTC Easypower E, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, etc. - Operating pressure: 300-700 bar - Flow rate: 15-30 l/min - Motor: Electric 32A/63A, 3-phase 400V-50Hz 20-30 HP / 15-22.5 kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Dry weight: approx. 180/210 kg - High-pressure pump: Comet three-piston pump with ceramic pistons - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with industrial wheels Dwodefdz E Hspfx Albob - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels, 320 mm - Direct water intake via self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, 1200 mm stainless steel lance, and flat jet nozzle 15° The following models are available: Easy Power E 30/300 | 30 l/min, 300 bar | 18.5 kW Easy Power E 15/500 | 15 l/min, 500 bar | 15 kW Easy Power E 21/500 | 21 l/min, 500 bar | 22 kW Easy Power E 15/700 | 15 l/min, 700 bar | 22 kW

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed Dsdenab Rzspfx Albjwb - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Dwjdpfezz Achsx Albsb Maximum flow rate: 2.3 l/min at 4000 bar

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min Dwodpfx Aljxgua Ajbeb - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed Dwsdpfx Alenab Siobsb - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Dwjdpfx Aenab Rlslbeb We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, Year of construction: 2025, LG WATER SOLUTIONS LG SW 400 GR REVERSE OSMOSIS MEMBRANES – 36 UNITS Lot of 36 new and unused LG Water Solutions reverse osmosis membrane elements. All units remain sealed and originate from the surplus spare-parts stock of a PET manufacturing plant. TECHNICAL DATA Manufacturer: LG Water Solutions Model: LG SW 400 GR Equipment type: Reverse osmosis membrane elements Application: Seawater reverse osmosis (SWRO) Dimensions: 8 × 40 inches Certification: NSF certified Djdpfx Alezvlrzebewb Quantity available: 36 units Condition: New, unused and sealed Origin: Surplus spare-parts stock from a PET manufacturing plant

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Dwedpfswy Uu Asx Albob

Condition: used, Year of construction: 2012, operating hours: 1,861 h, functionality: fully functional, total length: 4,100 mm, total height: 1,950 mm, total width: 1,930 mm, pressure: 600 bar, empty load weight: 1,320 kg, fuel: diesel, overall weight: 1,800 kg, power: 36.5 kW (49.63 HP), temperature: 55 °C, SDAH industrial machine, high-pressure pump: + Woma + Ecotherm 600 + First registered: 21.11.2012 + 1,861 operating hours + 4-cylinder Kubota diesel engine, 2400ccm; 48 hp Djdozpycbspfx Albswb + WOMA high-pressure pump, 600 bar + 2 burners (1 burner disconnected) + 55°C heating temperature + Ball head coupling + Single-axle chassis + Tool box at the front + Storage compartment at the rear + 200l water tank + Foot switch + 2 x cable reel + connection cable + HD hose + Woma gun + 410cm x 193cm x 195cm (l x w x h) + Unladen weight: 1,320 kg; permissible GVW: 1,800 kg + High-pressure cleaner, from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l Dwsdpfx Aexgumcslbsb – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: good (used), Year of construction: 2013, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, wet-dry vacuum cleaners, liquid and chip vacuum cleaners, water vacuum cleaners, wet vacuum cleaners Dwjdpfx Ajiaqmfslbsb -Manufacturer: Numatic, industrial vacuum cleaner type WVD 900-2 -Connection: 230 volts -Power: 2400 W -Number: 1x industrial vacuum cleaners available -Dimensions: 740/485/H880 mm -Weight: 23 kg

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: B0.01177.0628, operating pressure: 570 bar, type of input current: three-phase, input voltage: 400 V, temperature: 70 °C, volume flow: 7.44 m³/h, water pressure: 570 bar, pump capacity: 124 l/min, rotational speed (max.): 1,500 rpm, Equipment: type plate available, For sale is a Hammelmann high-pressure pump unit on a base frame, with a 132 kW three-phase motor and a partially transparent protective housing. The exact model designation is not explicitly stated on the existing nameplates; the following data for the offered machine are decisive. Technical data according to the pump and motor nameplates: - Machine number: B0.01177.0628 - Order number: 09.11179.1046 - Year of manufacture: 2010 - Maximum operating pressure: 570 bar - Flow rate: 124 l/min - Piston diameter: 40 mm - Pump drive power: 131 kW - Speed: 1,500 rpm - Maximum fluid temperature: 70 °C - Pressure control valve: 0022 - Oil type: BM 320 - Oil quantity: 12.5 l - Oil pressure: 2.0 bar - Motor: AC Motoren GmbH/Küenle AH 315 MA-4 - Motor power at 50 Hz: 132 kW - Motor voltage at 50 Hz: 380–420 V Δ / 660–720 V Y Dwjdpfezzr Nqsx Albsb - Motor protection class: IP55 Visible scope of supply according to the images: - Hammelmann high-pressure pump - 132 kW three-phase motor - Coupling and drive - Pressure control and safety valves - Lubrication/oil unit - Connection lines and cables - Base frame and partially transparent protective housing Used condition with dirt and/or oil stains, paint chipping and surface rust, especially on the motor protection grille. The functional condition has not been re-checked after disassembly; therefore, it is sold as untested. No separate control cabinet, no lance, and no long high-pressure hose are included. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.