Used Pre-Coated for sale (14,141)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Lsdpfx Apezqapkomshk Corner milling unit Polishing unit Year of manufacture: 2013

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Lhjdpfx Apou Evi Romsk Max. machinable height: 120 mm Gluing System: EVA Hotmelt

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Gluing System: EVA Hotmelt Ledpfou Eviqjx Apmjhk

Condition: used, Year of construction: 2003, machine/vehicle number: MR2TTR23099, AVAILABLE from Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm Ledpfx Apezmh Erjmehk - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length: 1.640 mm - Machine width: 3.000 mm - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: excellent (used), Mobile pallet wrapping machine with film pre-stretching Inventory No. 3897 Manufacturer: Robopac Type: Robot Master PDS Year of manufacture: 2017 Technical data (approx.): * Wrapping height max. 2200 mm * Max. width unlimited * Min. width approx. 600 mm * Adjustable travel speed * Film width 500 mm Ljdpfx Aozp R Tdjpmehk * Core diameter max. 76 mm * Weight approx. 340 kg * In very good condition!

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) Lodpfenzhxqjx Apmehk 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: used, Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 X-ray fluorescence coating thickness measuring device Manufacturer: Helmut Fischer GmbH + Co. KG, Germany Type: XDL-XYZpT8 Model: FISCHERSCOPE X-RAY Machine type: X-ray fluorescence measuring device / coating thickness measuring device (XRF / RFA) For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG. The FISCHERSCOPE X-RAY is suitable for non-destructive coating thickness measurement and material analysis using X-ray fluorescence (XRF/RFA). The system is designed for measuring functional layers, corrosion protection layers, and various metallic coatings and is used in quality assurance, electroplating, surface technology, research, and laboratories. The device comes from a warehouse liquidation and is explicitly sold untested and without warranty. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence (XRF / RFA) Measuring chamber with C-slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM stroke: 0–80 mm Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Equipment: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Measuring chamber with protective cover Software Operating manual Power connection Serial interface (Sub-D) Other accessories as shown in the pictures Application areas: Coating thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Materials testing Laboratory Research and development Condition: Lsdezl Ulvspfx Apmohk Used. The device comes from a warehouse liquidation. Optical condition as shown in the pictures. The device has not been tested by us and is explicitly sold untested and without warranty. Scope of delivery: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Other accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine / combination spray cleaning system, type L101 HP Automatically operated hot water parts washing machine with basket drive via gearbox motor, stainless steel washing pump (manufacturer: Lowara), spray system with stainless steel nozzles Additionally, manual cleaning with high-pressure nozzle (60 bar) and foot switch, air blow-off gun, large viewing window with gauntlet gloves, LED interior lighting - Basket diameter: 910 mm - Usable height: 490 mm - Max. load weight: 200 kg Lhedpod R Ahlofx Apmek - Spray pressure (washing pump): 2.3 bar - Spray pressure (HD pump): adjustable up to max. 60 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 60°C) - Machine dimensions (L x W x H): 1,300 x 1,500 x 2,100 mm - Empty weight: approx. 200 kg ++Wash cycle timer freely adjustable (minutes and hours) ++Complete cleaning machine (internal components and external housing) made of ++stainless steel 1.4301 ++Water circulation and loading basket made of stainless steel 1.4301 ++Bath cover with fine filter (2,000 microns) ++Operating hour counter ++Steam extraction with condensate return ++Omron timer for time setting in seconds/minutes/hours OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Spray pressure 1 – 1,5 bar Ledpfxszpxwds Apmshk Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 4 is a final fine osmosis rinse direct from the osmosis plant. The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Lhjdpfxswmm U Uo Apmek

Condition: new, Year of construction: 2026, 750 mm RUBBER-COATED DRIVE PULLEY for SM75 belt sanders Ljdpfx Apezph Tzjmjhk Technical specifications PULLEY CONTACT AREA (W x S) 195 x 76 mm INNER BORE 22 mm

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Lhedpfxsmqty Ue Apmok Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Lhsdpfx Aemqty Rspmsk Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Lodpfx Ajmqtzcspmshk Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. - Powder coating booth with spray robot (6 spray guns) Lsdpfx Aozn Ixnspmehk - Donaldson Torit dust extraction system (11 kW) - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.

Condition: new, Year of construction: 2004, PVC-coated wire for making fence_ green coated wire with diam. 2,3 mm - 2,8 mm - 3,8 mm grey coated wire with diam. 2,5 mm - 2,8 mm - 4,2 mm Lhjdpfx Aex Ruhkjpmok

Condition: used, functionality: fully functional, Ferwood Code: RU0011405 - Condition: Used - Functionality: Fully functional - Compatible Machine: HOMAG KAL-KFL-KAR EDGEBANDING MACHINE - BIESSE STREAM - SCM STEFANI - HOLZHER - KDT - IMA - If interested we offer an overhaul service, contact us. Ljdpfxev I Ah Uj Apmohk

Condition: used, functionality: unexamined, Ferwood Code: RU0011324 - Manufacturer Code: MC12-1X1CEX1 - Condition: Used - Functionality: Not tested - Compatible machine: - Weight: 230 kg - Dimensions: 120x80x130 cm - If interested, we offer overhaul service, please contact us. Lhsdpfxsyrp Igo Apmok

Condition: used, functionality: unexamined, Ferwood Code: RU0005902 - Manufacturer Code: MC12-1X1CFX1 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 155 kg - Dimensions: 120x80x120 cm - If interested, we offer overhaul service. Please contact us. Lhedpfsyrp Dhsx Apmok

Condition: used, Year of construction: 1982, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card boardUV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Lodeh Ayfpepfx Apmshk Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Lodpfsh Axquex Apmjhk Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Complete primary and secondary crushing plant, consisting of the following components: Primary crusher: LOKOMO K-140 single-toggle jaw crusher 1,400 x 1,200 mm, feed hopper, vibrating feeder and discharge chute. Secondary crusher: LOKOMO G4214 cone crusher, cone diameter: 1,350 mm, feed and discharge box, electrical and hydraulic installation. Screening plant: LOKOMO B 256T, screen area: 4,000 x 1,300 mm, with steel structure. Secondary crusher: LOKOMO S21-14 cone crusher, cone diameter: 2,100 mm, hydraulic installation; optionally with steel structure. Conveyor belts: LOKOMO 800mm x 10m, 1200mm x 6m, 1000mm x 31m, and 1400mm x 32m. Lhjdewcyh Hepfx Apmek

Year of construction: 2006, condition: excellent (used), Description to follow! Lhjdpfx Apexy S Ecomjk

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, working width: 250 mm, Coating machine / brush applicator Manufacturer: Ceetec Type: A 250 Automatic coating machine with brush application Workpiece dimensions: Width max. 250 mm Height max. approx. 100 mm Length from approx. 800 mm The coating machine is suitable for applying paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical data: - electronic diaphragm pump (no compressed air required) - spray nozzles for all-round application of wood preservatives - 12 rotating applicator brushes on 8 axes (standard nylon bristles) for 4-sided application of coating materials Workpiece feed adjustable via feed roller, approx. 16-45 m/min. Capacity approx. 960 – 2500 meters/hour Ledoyuaptepfx Apmshk Power connection 3 × 380 V EU Machine weight approx. 350 kg The machine has been cleaned and technically inspected. Hose connections, diaphragm, and brush set have been renewed. Ready for immediate use!

Condition: like new (used), Manufacturer: Kleemann Type: VU1S 1240ST Size: 1.200 x 4.000mm Mach. No.: 38016201 Year of Manufacture: 1998 Deck: 1 (Ca. 80mm Deck opening) Included: – Electrical Motor – Springs Ljdpfx Apjg Sty Eemshk Vibrating screen can be sandblasted and painted.