Used Powder Coating System for sale (41,651)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price Gjdpfx Aoz Rnu Tjkyjkc • Cena: 369 000 EUR excl tax

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-Recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robustly built and, thanks to the generous manual coating opening, is ideally suited for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) Gjdpfx Aoz N Aivskyskc • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For enamel powder: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is drawn downwards The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be directly reprocessed and reused in the cycle (enormous material savings!) • Cleaning unit: Unit mounted on top, including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire suppression system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important collection & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500 net (plus VAT). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Powder coating booth with multi-cyclone and afterfilter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with afterfilter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideally suited for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data: • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and afterfilter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth base with inlet, manual coating opening, and gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / Afterfilter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power afterfilter:   15 kW with 12 filter plates (air volume flow: 8000 m³/h)   22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pickup & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). “Everything from one source: We would be happy to offer you a suitable bank financing option for your project.” More items - new and used - can be found in our shop! Gsdpfsz Nyqwjx Akyokc International shipping costs on request!

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Gksdpfx Aezqur Hskyec Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: new, Year of construction: 2027, MANUAL POWDER COATING PLANTS AND SYSTEMS Our design department will give you the best customized powder coating line solution which meets your product capacity demands. Made in Türkiye CE Mark Gksdpfx Akjvv Nuqjyec We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Year of construction: 2026, functionality: fully functional, working height: 2,200 mm, BUMEX Sp. z o.o. offers a professional industrial washing system designed for the preparation of components prior to the powder coating process. The equipment has been engineered for demanding industrial environments where washing efficiency, process stability, and long-term durability are essential. The washing system enables effective preparation of steel and aluminum components through a multi-stage cleaning, degreasing and rinsing process. Technical parameters Working chamber dimensions: 1500 × 3200 × 2200 mm Process technology: 3-stage washing process Process tanks The unit is equipped with three process tanks: tank for cleaning / degreasing chemicals tank for rinsing water tank for demineralized water (DEMI water) Tank capacity: 1500 – 2000 liters DEMI water generator The system is equipped with a demineralized water generator, ensuring high-quality final rinsing and optimal surface preparation before powder coating. Heating system The chemical tank is equipped with a heating system for the process liquid. Available heating options: oil heating gas heating electric heating Maximum operating temperature: up to 60°C Machine construction The machine is manufactured entirely from high-quality stainless steel AISI 1.4301, which provides: excellent chemical resistance long service life easy maintenance and cleaning The washer features: very robust industrial construction full thermal insulation of the entire machine to reduce energy losses spray system designed for minimal mixing of process liquids pre-filter for collecting contaminants high washing efficiency Control system The machine is equipped with a fully automatic control system, enabling precise control of: process temperature pump operation washing time sequence of process stages Why choose BUMEX? Our equipment stands out on the market due to: very high manufacturing quality robust industrial construction operational safety complete technical documentation possibility of adapting the equipment to the existing production facility All machines manufactured by BUMEX Sp. z o.o. are CE certified. Additional technological support Gjdpfshfv D Sox Akyekc BUMEX also provides: powder coating booths dust extraction and filtration systems industrial ventilation systems professional technological consulting Cooperation conditions company transport available (price determined individually) VAT invoices issued short production lead times possibility of manufacturing machines in custom configurations and dimensions

Year of construction: 2023, condition: new, functionality: fully functional, 2x ICM19 Standard system designed for operation at ambient temperatures of 5 °C - 30 °C GA-drawing according to NEA standard arrangement P&ID No. EX-Protection PSR 11 + ATEX protective systems Power Supply 380 V ± 5% - 50 Hz Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C. (altitude of installation side < 500m a.s.l.) Capacity Range 137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge Nominal Capacity Gkjdpfx Aow Snm Uskyoc 319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation) Details for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Gedpfjz Rn Dnox Akyjkc

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) Godoum Uflepfx Akyjkc - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today! Gksdpfoun Sd Uex Akyec

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. Gkjdezu Rpiopfx Akyoc pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Contents of the system: ►1 unit - Gas-heated large powder coating oven ►1 unit - Automatic powder coating booth ►1 unit - Electrically heated small powder coating oven ►2 units - Room-type monocyclone manual powder coating booth ►6 units - Automatic powder coating gun ►3 units - Manual powder coating gun Gkedpsiivq Uofx Akyec ►1 unit - Automatic powder recovery unit ►6 units - Monocyclone ►1 unit - Automatic control panel ►1 unit - Automatic rod movement system, speed-controlled ►2 units - Movable platform, speed-controlled ►8 units - Parking station ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Rods for hanging Our system is located at Anhaltstr. 30, 14943 Luckenwalde. You can schedule an appointment to view the machines. The system has been in operation for 10 years. Since we are the direct manufacturer of the system, we can make any desired modifications to the machines by mutual agreement. Does it not fit into your existing assembly area? Then we can make changes to the layout. Please check the PDF file of the system using the link below.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Gksdpfx Akjzlh Aueyec Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Gsdpfoy Al T Ijx Akyekc Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Gksdpfxsw Ek Ntj Akysc Price on request!

Year of construction: 2019, condition: good (used), Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system from 2019. The automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line consists of, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust gas cleaning system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of construction main system: 2019 Previous operation: 3-shift operation (condition corresponds to age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of construction 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust gas cleaning system (VeniaKab / RNV) Condition notes: Control technology: According to the factory maintenance department, it is state-of-the-art. Electrical & mechanical: Mostly in a condition appropriate to its age or good condition. Cyber security data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. Gkjdpfx Akozka Sfeyjc "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Paint roller machine, roller coating machine, powder coating system -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg Gksdpegal Agsfx Akyec

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 250 kg, temperature: 220 °C, heating capacity: 60 kW (81.58 HP), workpiece length (max.): 4,000 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Professional powder coating system – Compact complete solution meeting industry standards High-performance and flexible: This complete system delivers excellent coating results for workpieces up to 4.0m in length. Equipped with high-quality Wagner or Gema technology, an indirectly heated gas/electric curing oven, and an integrated conveying system. Each component can be individually adapted to your production requirements and space constraints! For sale is a professional powder coating complete system from the trading agency Klaus Benecke, designed for high manufacturing quality and smooth material flow. The system combines a large-volume curing oven with energy-saving rock wool insulation and indirect gas heating for even heat distribution up to 220 °C. A mobile spray booth with a powerful filter extraction system and integrated Wagner/Gema application technology ensures precise coating. The manual rail system with transverse movement efficiently connects the workstations and is designed for high load capacities. A central control system with PT 100 sensors ensures precise temperature control of the entire system. Gkedjffwfxepfx Akyoc Quick overview (technical details): - Curing oven: 4,000 x 1,500 x 2,200 [mm], max. 220 °C, 150 mm rock wool insulation, indirect gas burner (Riello BS2, 60 kW). - Spray booth: Mobile (2,000 x 2,100 x 2,200 [mm], 6,000 m³/h fan (3.0 kW), 4 cartridge + absolute filters, 60 L powder container. - Coating system: Wagner/Gema manual system (Corona/Tribo, max. 450 g/min). - Conveying technology: Rail system with transverse movement, 72 m rail, 1 trolley, 6 traverses (load capacity: 250 kg/traverse, 750 kg/trolley). - Control system: Control cabinet for oven and booth with PT 100 sensors. Individual configuration: Do you have specific requirements regarding component sizes or throughput? We will plan and configure your powder coating system precisely according to your specifications. Contact us now to discuss your project details.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, power: 38 kW (51.67 HP), input voltage: 380 V, temperature: 250 °C, heating capacity: 36 kW (48.95 HP), inner dimension length: 2,400 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, volume flow: 3,500 m³/h, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Turnkey package for professional powder coating ✅ Brand-new, unused industrial products ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also enquire about current stock availability. 🔥 OFFER VALID UNTIL 06.06.2026 ONLY 🔥 Package list price ex works: €29,650.00 net Promotional discount: 20% = €5,930.00 ➖➖➖➖➖ ⭐ Powder Coating System – MINIPBMAT-3-L PROFESSIONAL COMPLETE PACKAGE FOR HIGHER COATING CAPACITY! With the MINIPBMAT-3-L, you receive a powerful complete system comprised of an electric powder oven, L-version powder booth, and multicolor powder coating gun set. The L-version offers increased working comfort and is especially beneficial for wider workpieces and regular coating operations. ☘️ More space ☘️ Powerful extraction ☘️ Professional results ✅ Complete package of 3 machines ✅ Powder oven + Powder booth + Powder gun ✅ Attractive promotional price only until 06.06.2026 Gksdpfx Akowc Ep Ajysc ✅ 3-filter booth with enhanced extraction ✅ Ideal for small, medium, and wider workpieces ✅ Everything from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-151824 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.03-L ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical highlights: ♨️ MATOVENB-151824 Electric Powder Oven ✔️ Electric heating output: 36 kW ✔️ Total power: approx. 38 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Circulation fan output: 3,000 m³/h ✔️ Suitable for professional production environments 🎨 MATBOOTH.FT.03-L Powder Booth ✔️ 3 polyester filters ✔️ Extraction capacity: 3,500 m³/h ✔️ 3 kW extraction fan ✔️ L-version with extended lower frame ✔️ Ideal for wider workpieces 🔫 STR-ELITE Multicolor Gun Set ✔️ Multicolor version ✔️ AOS Automatic Optimization System ✔️ 4-mode memory option ✔️ Powder coating output: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional extensions available 🎨 Options for Matech powder booths: ✅ Nano filter box – operation possible without fixed exhaust duct ✅ Base frame with sieve powder recovery system ♨️ Options for Matech powder ovens: ✅ PID control for precise temperature regulation ✅ Touchscreen panel and smartphone operation ✅ Ramp heating mode for controlled temperature profiles ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ✅ Removable shelf system or workpiece trolley ✅ Overhead rail system for the oven ✅ ATEX-compliant oven version on request ✅ Double-sided door option / Front and back doors ✅ Carriage / Trolley for rail system ✅ Support feet for rail system ✅ Special sizes available on request Rails and supports are not included in the price. ➖➖➖➖➖ 🚀 Secure your promotional package now! This offer is only valid until 06.06.2026. After this date, regular package pricing applies. ✳️ We offer various financing models. Please contact us for leasing, hire-purchase, or installment payment options. Enquire now – get your business ready for professional powder coating!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Gkjdpoyc S Htjfx Akyoc Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source Gkjdpfxsx H Tado Akyec - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: new, Year of construction: 2026, functionality: fully functional, power: 24 kW (32.63 HP), temperature: 250 °C, inner dimension length: 2,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 1,800 mm, volume flow: 3,000 m³/h, energy consumption: 28 kWh, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately based on delivery address. Please contact us for an individual transport quote. ✅ Complete package for professional powder coating ✅ Brand-new, unused industrial products ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after payment received 📦 Please inquire additionally about current stock availability. 🔥 PROMOTION VALID UNTIL 06/06/2026 ONLY 🔥 Package list price net: EUR 23,370.00 Special discount: 15% = EUR 3,505.50 ➖➖➖➖➖ ⭐ Mini Powder Coating System – MINIPBMAT-2-W FLEXIBLE TURNKEY SOLUTION FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-2-W, you receive a complete system consisting of an electric powder oven, a mobile powder booth, and a multi-color powder coating gun set. The W-cabinet is particularly suitable for flexible manual coating jobs and is ideal for use in workshops and production lines. ☘️ Mobile ☘️ Flexible ☘️ Ready to use ✅ Complete package with 3 machines ✅ Powder oven + powder booth + powder gun ✅ Attractive promotional price only until 06/06/2026 ✅ Ideal for small and medium-sized workpieces ✅ Flexible booth solution for workshop and production ✅ Everything from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-101620 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.02-W ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set Gkedswc Epvspfx Akysc ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-101620 Electric Powder Oven ✔️ Electric heating power: 24 kW ✔️ Total connected load: approx. 26 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Blower capacity: 3,000 m³/h ✔️ Timer function and automatic shut-down 🎨 MATBOOTH.FT.02-W Powder Booth ✔️ 2 polyester filters ✔️ Extraction volume: 2,800 m³/h ✔️ 2.2 kW extraction fan ✔️ 360° rotatable workpiece suspension ✔️ Flexible use for manual coating operations 🔫 STR-ELITE Multicolor Gun Set ✔️ Multicolor design ✔️ AOS Automatic Optimization System ✔️ 4-mode memory option ✔️ Powder coating output: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional extensions available 🎨 Options for Matech powder booths: ✅ Nano filter box – operation possible without fixed exhaust duct ✅ Undercabinet with sieve powder recovery system ♨️ Options for Matech powder ovens: ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp-heating mode for defined temperature curves ✅ Save process parameters ✅ Weekly & monthly reports at the touch of a button ✅ Insert shelf or workpiece trolley ✅ Upper rail system for the oven ✅ ATEX version of the oven on request ✅ Double-door / front and rear door versions ✅ Trolley for the rail system ✅ Support legs for the rail system ✅ Custom dimensions on request Rails and beams are not included in the price. ➖➖➖➖➖ 🚀 Secure the promotional package now! This offer is valid only until 06/06/2026. Afterwards, regular package prices will apply. ✳️ Various financing options are available. Feel free to contact us for leasing, hire purchase, or installment payment plans. Enquire now – make your business ready for professional powder coating!

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, STR-SMART Multicolor Powder Coating Gun Set | Touch Control | Wi-Fi | New ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized shipping quote. Gkodpfx Aotpxpfjkyoc ✅ Brand new, unused professional industrial product ✅ 2-year warranty ⏱️ Delivery time: approx. 15 days after receipt of payment Please additionally inquire about current stock availability. ➖➖➖➖➖ ⭐ STR-SMART Multicolor Powder Coating Gun Set ⚡️⚡️⚡️ATEX-certified.⚡️⚡️⚡️ SMART TECHNOLOGY – WITH PROTON SERVICE! The STR-SMART Multicolor Powder Coating Gun Set is a state-of-the-art solution for professional powder coating tasks, offering high efficiency, user-friendly operation, and flexible use with a variety of powder colors. With touch controls, Industry 4.0 features, Wi-Fi connectivity, and remote access, the unit offers optimal convenience in daily use. Up to 100 different operating parameters can be stored—ideal for recurring coating jobs and streamlined workflows. The lightweight, ergonomic gun ensures comfortable handling. With various nozzle types, the set can be adapted to diverse coating styles. ☘️ Powerful ☘️ Cost-Effective ☘️ Environmentally Friendly ✅ Multicolor capability for flexible color applications ✅ Touch operation, 7" TFT touchscreen ✅ 100 storable operating parameters ✅ Wi-Fi connectivity and remote access ✅ Digital operating manual in 4 languages ✅ Ergonomic, lightweight gun ✅ Nozzle types for different coating styles ✅ Professional solution for manual powder coating ➖➖➖➖➖ Technical Specifications: ✔️ SMART electro-pneumatic control panel ✔️ Input voltage: 110–240 V AC ✔️ Power consumption: 25 W ✔️ 7" TFT touchscreen ✔️ Corona system ✔️ Corona current limit: 0–120 μA ✔️ Air pressure: max. 6–8 bar ✔️ Air consumption: 116 l/min ✔️ Maximum powder coating output: 450 g/min ✔️ Powder feed rate: 0–27 kg/h ✔️ Gun weight: approx. 460 g ✔️ Powder coating hose: 6 m ✔️ Power cable length: 6 m ✔️ Electrical protection class: IP54 ✔️ European Standard: EN 50050:2 ➖➖➖➖➖ This set is ideally suited for companies seeking a modern, digital, and efficient solution for manual powder coating tasks. The storable parameters facilitate repeatable results, making it perfect for professional workshops and industrial applications. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models so you can plan your investment flexibly. Contact us for information on leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from superior service and quality! ✨ Our machines are built to order and supplied as new, unused units with a 2-year warranty. Special dimensions or customized versions are available on request. We are happy to help design the right solution for your workshop. Request your quote now—prepare your business for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Godpfsy N Ubzsx Akyjkc Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,258 mm, total height: 2,790 mm, total width: 2,370 mm, warranty duration: 24 months, input voltage: 380 V, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty ⏱️ Delivery time: approx. 4 weeks after payment receipt Please also inquire about current stock availability. ⭐ Matech Powder Coating Booth – MATBOOTH.FT.3-L MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT.3-L is a professional powder coating booth for manual powder coating of small to medium-sized workpieces. The L version features a longer base frame, providing more working comfort and advantages for wider workpieces. Thanks to the 3 polyester filters, the high suction power, and the automatic filter cleaning system, the booth enables clean, practical, and economical operation. ☘️ Efficient ☘️ Clean application ☘️ Professional results ✅ L version with longer base frame ✅ Advantageous for wider workpieces ✅ Compact solution for professional powder coating ✅ Powerful extraction system ✅ Automatic filter cleaning system ✅ Economical operation through powder recovery ✅ Individual customization possible through various optional features ➖➖➖➖➖ Technical specifications: ✔️ 3 polyester filters ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning time ✔️ Powder recovery container: 30 L ✔️ 1 x 3 kW extraction fan ✔️ Suction capacity: 3500 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust connection required – with the nano-filter box! ✨ With the optional nano-filter box, you can operate your powder coating booth without connecting it to an exhaust stack or a fixed exhaust duct. This makes the booth particularly versatile, even in workshops where there is no direct exhaust system. In addition, the booths can be individually adapted and modified to your working requirements with various options. ➖➖➖➖➖ Gkjdpfogf A Shjx Akyec ✳️ Maintain your liquidity! We offer you various financing models so that you can flexibly plan your investment. Please contact us for information on leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from our service and quality advantages! ✨ Proton Maschinenbau offers professional Matech surface technology for industrial applications. Our machines are manufactured to order and delivered as new, unused machines with a 2-year warranty. Special sizes or individual designs are available upon request. We will gladly plan a suitable solution for your workshop. Request a quote now – get your company ready for professional powder coating! ☀️ 2 YEARS WARRANTY ☀️