Used Powder Applicator for sale (10,150)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Codpfx Aijx R N Ursieri Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing Crodpfoz Rnu Tjx Aiiei • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Year of construction: 2023, operating hours: 500 h, condition: like new (used), functionality: fully functional, We offer a complete industrial production line designed for the extraction, purification, concentration and spray drying of collagen derived from fish processing by-products. The production line is designed to process fish skin and fish bones into collagen powder using controlled enzymatic hydrolysis, mechanical separation, filtration, ion exchange purification, evaporation and spray drying. The system integrates multiple processing stages into one industrial production solution. Main Equipment Included 1. Collagen Extraction and Enzymatic Hydrolysis System 3 × stainless steel enzymatic reaction tanks, each with 3,000 L effective capacity SUS316L product-contact surfaces Heating jackets, insulation and agitators Enzyme preparation and acid dosing tanks Pumps, vibrating screen and intermediate storage tanks Temperature, level and pH monitoring Siemens PLC control system 2. Separation System Industrial decanter centrifuge, model LW350, capacity 2–3 t/h Disc separator, model BDY311, capacity 2–3 t/h Stainless steel receiving and storage tanks Transfer pumps and process control system 3. Purification and Decolorization System Anion and cation exchange columns Activated carbon filtration system Stainless steel plate filtration unit Regeneration tanks Heat exchanger and transfer pumps Automated process control 4. Concentration and Drying System Double-effect falling film evaporator Water evaporation capacity: 1,600 kg/h Concentrate holding tanks Industrial spray dryer Spray dryer water evaporation capacity: 150 kg/h Hot air generation and powder collection system 5. Cleaning and Water Treatment Automatic CIP cleaning system with 4 × 3,000 L tanks CIP circulation pumps Reverse osmosis (RO) water treatment system Water treatment capacity: 5,000 L/h Stainless steel process piping and associated equipment Technical Specifications Finished product: Fish collagen powder Nominal production capacity: Approx. 1,000 kg/day Raw material requirement: Approx. 5–6 tonnes/day Steam requirement: Approx. 2 tonnes/hour Electrical power requirement: Approx. 300 kW Compressed air requirement: Approx. 1 m³/hour Cooling system: Circulating cooling water Main process materials: Stainless steel SUS304 / SUS316L Automation: Siemens PLC and touchscreen control systems Production Process Raw material washing → Enzymatic hydrolysis → Filtration → Decanter separation → Disc separation → Ion exchange purification → Activated carbon filtration → Sterilization → Concentration → Spray drying → Powder collection and packaging. Applications The production line is intended for industrial processing of fish-derived raw materials into collagen powder. Potential applications include: Marine collagen production Codpfs Ahynvsx Aiijri Fish processing by-product valorization Collagen ingredient manufacturing Food ingredient production Nutraceutical raw material processing Final product specifications and suitability for particular applications depend on the selected process parameters, raw material quality and validation. Additional Information The system is designed as an integrated industrial processing line, including extraction, separation, purification, concentration, drying, cleaning and water treatment equipment. Detailed equipment specifications and technical documentation are available upon request.

Condition: new, Year of construction: 2024, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen Crsdpfeflpi Nox Aiioi 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. Cedpfxjq Nf Uws Aiieri When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Crjdpfjq Nf U Ejx Aiiji Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Credoq Ngafspfx Aiisi Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Crjdpfxezqur Hs Aiisi Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: new, Year of construction: 2026, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier Crodpfxovlwkxe Aiioi ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Condition: excellent (used), TETRA PAK APPLICATOR TCA45 CONVERTED TO HELICAP27 1000 PRISMA YOM 2006 FULL COMPLETE EXCELLENT CONDITION DISMANTLED AND PACKED INTO TETRA BOX Codpeuzv E Rofx Aiijri VIDEO IN RUNNING CONDITION UNDER REQUEST

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Crodpfxjyc S Hte Aiioi Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: new, warranty duration: 12 months, POWDER COATING BOOTH WITH 1 OR 2 FILTERS | PROMOTIONAL OFFER VALID UNTIL 31.12.2026 Directly from the manufacturer | Royal Gold Industries Kft. Are you looking for a reliable powder coating booth for your business? We offer two models at attractive promotional prices directly from the manufacturer. Take advantage of our end-of-year promotion until December 31, 2026! ⚙️ Variant 1: Powder coating booth with 1 filter Promotional price: €4,999.00 net Technical specifications: - 1 filter - 1 fan - Conventional control system - Manual pneumatic filter cleaning - 1 × LED light ⚙️ Variant 2: Powder coating booth with 2 filters Promotional price: €5,999.00 net Technical specifications: - 2 filters - 2 fans Crjdpfx As Agnw Eeiioi - Conventional control system - Manual pneumatic filter cleaning - 1 × LED light Delivery and payment terms - Delivery time: approx. 3–4 weeks - Payment: 50% deposit, remaining amount before delivery - Warranty: 12 months ✅ Your advantages - Directly from the manufacturer, without intermediaries - Attractive manufacturer prices - Two models to choose from - Personal consultation - Delivery to Germany and other European countries upon request Offer valid only until 31.12.2026! Secure your powder coating booth at the promotional price now. Whether a compact model with one filter or a larger model with two filters, we will be happy to advise you on the selection. Inquire now via classified ads! All prices are net, plus statutory sales tax where applicable. Dimensions and other technical details available upon request.

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Crjdpfx Ajxy Tmuoiisi

Condition: excellent (used), Year of construction: 2010, KOMORI LITHRONE S-529 M C 66 million Year: 2010 Max. sheet size: 530 x 750 mm Max. print area: 520 x 736 mm Min. sheet size: 200 x 360 mm Substrate thickness range: 0.04 – 0.8 mm Max. production speed: 16,000 sheets/h *PQC-S remote control system (Quality Control System) for printing ▪️Remote ink control ▪️Remote dampening control ▪️Remote register control *KHS-AI® computer-controlled machine management system ▪️Intelligent inking system ▪️Machine self-diagnostic function ▪️Advanced CIP4-based information flow management ▪️Module for connection to a scanning unit * Touchscreen monitoring * High-Speed-Start system * Densitometric scanning unit * Automatic blanket cylinder washing * Automatic inking unit washing (dual nozzles for solvents and water) * Automatic impression cylinder washing * Remote substrate thickness adjustment from the control console * Remote substrate format adjustment from the control console Cods Ah Sbxepfx Aiiori * Semi-APC (Semi-Automatic Plate Change) system * Stream feeder with an 800 mm pile height * Feeder head equipped with lifting suckers (2x) and forwarding suckers (2x) * Deionizing air blast at the feeder head * Side air blasts * Pile support table for manual pile preparation * Table • Stream feeder with additional suction tapes * Electronic feed control * Electronic front-lay (register mark) control * Skew control via front-lay bar * Optoelectronic sheet-flow monitoring from the feed pile * Ultrasonic double-sheet detection (ULTRASONIC) * High-precision impression cylinders * Reduced number of transfer cylinders * Solid-construction transfer cylinders * Accessible plate cylinder * Accessible blanket cylinder * Chrome-plated impression cylinder * Cylinder designed for high-load/heavy-duty applications * Diamond-coated transfer grippers * Precision ink-feed adjustment (500-step ink-fountain key opening) * Inking unit featuring 19 rollers, including 4 oscillating/distributing rollers * Anti-ghosting roller (B and D positions) * Independent drive for the ink-fountain roller (ductor) * Adjustable ductor dwell time * Remote control of ink zones via the PQC-S console * Option to disengage the inking unit on the first or fifth printing unit KOMORIMATIC Dampening System * Dampening system suitable for both alcohol-based and alcohol-free printing * Oscillating roller for uniform dampening solution distribution, preventing ghosting and streaking * Rotational speed reduction • Continuous cleaning of the printing cylinder (or flat cylinder surface) based on the type of soiling * Integrated sensor * Pneumatic engagement and disengagement of rollers, controlled from the operator console * High-pile delivery (stack height: 900 mm) * Sheet decurler * Deionizing bar * Automatic lubrication for delivery chains * GRAFIX powder spray system o Automatic adjustment for printing speed o Automatic format compensation * Engagement and disengagement of dampening rollers * Engagement and disengagement of inking rollers Coating unit with TRESU chambered doctor blade system o Suitable for water-based and UV coatings o Remote register adjustment: ▪️ Lateral ▪️ Circumferential ▪️ Diagonal (adjusted at the transfer cylinder) o Remote adjustment for substrate thickness o Extended delivery: 2,000 mm o Special gripper bars – shadow-free (prepared for the installation of UV dryers) o Designed for tool-free mounting of rubber or photopolymer plates * Chambered doctor blade system

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Cedezn H D Nopfx Aiisri Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Csdpfx Aisz I Iv Reieri Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 25-TAPE CORE WINDING MACHINE WITH MULTI-BLADE CUTTING SYSTEM Structural description: The 25-tape core winding machine for producing paper tubes consists of the following components: Unwinder – made of shaped tubes protected with anti-corrosion powder coating. The unwinder has the ability to move on adjustable swivel wheels controlled from the operator panel. Codpfx Ae Ah Ex Noiieri Cascade adhesive applicator with pneumatic brakes, scrapers, and adhesive heater, distinguished by the ability to adjust tape guiding, braking, and adhesive film thickness. Adhesive supply is controlled by a membrane pump, and the entire system is controlled by a computer managing the operation. Forming section – consists of a steel body protected with powder coating, inside which the control system is located, a swivel arm with drums driven by 3 roller gearboxes with a total power of 3 x 15 kW. The drive arm has a reading of the swivel angle and longitudinal position, as well as a pneumatic belt tensioning system. The body has a replaceable "cold" mandrel for forming the cores with a standardized socket, and a guide tube with a counter-knife. Multi-blade cutting system – the cutting system body is a separate part of the core winding machine. Linear guides for the movement of the cutting unit are mounted on the body. Inside the body, the following drives are mounted: - servo drive for driving the circular knives of the cutting system - servo drive with planetary gearbox for moving the cutting unit - servo drive for retracting the counter-knife - servo drive for lowering the knife bar with 5 cutting modules. Coil width from 50 to 120 mm Coil diameter Dz = Ø 76 mm, Dz. Max. 1500 mm Coil loading: Electric winch Min. max. internal diameter of cores 38 mm / 250 mm Cutting performance for cores: Ø 50 mm, L= 100 mm, thickness 8 mm 160 pcs./min. / 9,600 pcs./h, 67,200 pcs. / 7h Lease transfer.

Condition: used, Item: LC-01336-APV-PowderMixer APV Powder Mixer PM+2 – Stainless Steel Powder/Liquid Mixer Manufacturer: APV Type: PM+2 Machine type: Powder Mixer / Powder-Liquid Mixing System Material: Stainless steel Condition: Used Location: Denmark Description Crodpoz Epvmsfx Aiiji Used APV Powder Mixer, Type PM+2, for efficient incorporation and mixing of powders into liquid products. The powder is fed through the stainless-steel hopper and introduced into the circulating liquid, providing fast and efficient mixing and helping to obtain a homogeneous product. Suitable for use in the dairy, food and beverage industries for mixing powders and dry ingredients into liquids. Typical applications may include: Milk powder Sugar Stabilizers Food ingredients Other soluble powders and dry ingredients The unit is manufactured in stainless steel and designed for hygienic food-processing applications. The machine is available from our stock in Denmark. Condition Used equipment, sold AS IS. Delivery EXW Denmark Worldwide delivery can be arranged at the buyer's cost. Please contact us for price, additional pictures, dimensions, and available technical information.

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 300 kg, workpiece height (max.): 1,800 mm, workpiece length (max.): 7,200 mm, fuel: domestic gas L, Eisenmann Powder Coating System – Complete System for Sale A high-quality, industrial powder coating system from the renowned manufacturer Eisenmann is for sale. The system was installed in 1995 and has been continuously modernized and kept up-to-date technologically. It is currently in operation and can therefore be inspected under real operating conditions. The system is characterized by its high reliability, robust industrial design, and long-term operational safety. Thanks to ongoing modernizations, it offers an economical solution for companies looking to expand their coating capacity or replace an existing system. Technical Data • Manufacturer: Eisenmann • Year of Construction: 1995, but continuously modernized • Condition: In operation / ongoing production • Maximum workpiece dimensions: 600 × 1,800 × 7,200 mm (W × H × L) • Water dryer: max. 290 kW (natural gas), modulating, manufacturer Elko • Powder dryer: max. 460 kW (natural gas), modulating, manufacturer Elko • Heating boiler: max. 460 kW (natural gas), modulating, manufacturer Elko • Workpiece weight / carriage: 35 carriages with a workpiece weight of 300 kg • Coating technology: Automatic powder coating with Gema Magic-Cylinder system • Manual coating: Gema manual coating system for rework and special parts • Modernizations: Continuously updated to the latest technology Credpfx Aoz E R Aboiioi • Pretreatment: renewed in 2024/25 by Euroimpianti, a 5-chamber system independent of chemical suppliers was installed. The system is currently operated with Alufinish chemicals in a chrome-free process. The pretreatment has a fully automatic Medotec chemical dosing and monitoring system. The pressure pumps are also monitored to ensure that the pretreatment is 100% effective. The chamber width is designed for 700 mm. The cycle time is currently 5 minutes/chamber, but can be adjusted individually. System Equipment • Conveying technology with automatic workpiece transport • Pretreatment area • Drying and curing technology • Automatic powder coating • Powder recovery system • Gema Magic-Cylinder application technology • Gema manual coating system with corona and tribotechnology • Control and regulation technology • Wastewater treatment • Demineralized water treatment, 2-fold redundant Special Advantages • System is currently in productive use • Continuously maintained and modernized • Proven Eisenmann quality for continuous industrial operation • Suitable for large and long workpieces • High coating quality and process reliability • Immediate availability upon agreement • Large package of spare parts for pretreatment/pumps/application/conveying technology available The system is particularly suitable for companies in the fields of metal processing, steel construction, mechanical engineering, vehicle construction, and industrial contract coating. Since 2015, the system has consistently achieved GSB Master Seaproof certification. An inspection of the system is possible at any time by appointment. We will gladly provide further technical documents, layout drawings, photos, as well as information on throughput, oven dimensions, and conveying speed to interested buyers. Price: Negotiable Location: 7344 Stoob

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Codpswhbnlofx Aiisri

Condition: new, Year of construction: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion coating), intermediate drying, an electrostatic coating zone (booth/powder coating station), and a curing oven. The workpieces are transported through the system by a conveyor system. Our company, ROMER®, plans, manufactures, and assembles complete powder coating lines. Crjdpfjcv Nl Rsx Aiiei Our systems can be inspected and tested at our facility in Hürth near Cologne. Request a quote for a system tailored to your specific application.

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. Credpfewf Dpgjx Aiiei It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is reduced to particles in 6 rows of small chambers, particle by particle, while simultaneously the particles are propelled against the grinding surface. The combination of these two effects results in a very fine grain size, and it is possible to dry the material during the shredding process. Keywords: turbo mill, impact mill, eddy current mill. Depending on the material, the machine can reduce the particle size to between 1000 µm and 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The possible applications range from minerals, industrial products, powder coatings, chemicals, and dyes to food and feed products. The innovations of the machine are: • the plug-in connections of the wear tools (always in the same position with minimal tolerances) • rotation in both directions – this ensures that the tools wear evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Cedpfezl Shzsx Aiiori Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: rotor and stator made of hard metal, available in different degrees of hardness; ceramic is also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control cabinet is not included.

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage needs. The modular high racking is ideal for logistics operations, industrial applications, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet rack system offers an efficient storage solution for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 690 cm - Depth: approx. 110 cm - Length: approx. 3080 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm (PNB0472) - Beam color: yellow powder-coated - Uprights: approx. 690 x 110 cm, pre-assembled - Upright color: blue powder-coated - Levels: floor + 3 - Pallet spaces: 132 including ground level - Version: Used STOW SCOPE OF DELIVERY: - 012 x upright frames (approx. 690 x 110 cm), pre-assembled - 066 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 132 x safety pins Price: €3,552.00 net €4,226.88 gross You will receive an invoice showing VAT separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery in Germany via our partner shipping company – freight costs depend on postal code - Professional assembly and dismantling by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer – tailored to your specific requirements. Whether new installation, modification, or extension, we offer expert advice on your racking configuration. Cjdpfxj Ahpr Do Aiiori SHOWROOM: Visit our showroom! On-site, you can get a comprehensive overview of our pallet racking, shelving systems, and further storage solutions. Many systems are assembled and can be experienced directly. Our expert advisors are available for your questions and tailored consultation – we look forward to your visit! Haven’t found the right solution? Visit our website to get a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Cedpfx Aoun Sd Ueiisri Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!