Used Powder Applicator for sale (8,937)

Year of construction: 2022, condition: new, Model KPO-3 Booth Type Open Worksize dimensions 2800 width x 2200 height x 1000 depth Overall dimensions 2800 width x 2300 height x 1700 depth Weight 550kg Power supply Electric Nominal power 0,69kW x2 Hodebuyr Tjpfx Amyjr Voltage 380V Frequency 50-60Hz Filters Polyester Filters count 3 Filters hang type Bagnet type, easy on/off Filter area 22,5m2 Filter cleaning system Pneumatic - Jet Venturi Ventilator type Aluminium ray rotor 2pcs. Loudness 74dBa Air consumption 10,200m3/h Warranty 12 months

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Powder extraction hood The Interflow powder extraction hood protects the user from solid contaminants that may be released during various operations. Due to its robustness and reliability, the unit requires a minimum amount of maintenance. Furthermore, the unit has a sturdy appearance and optimal ease of operation. Specifically, for example, during weighing operations, you can continuously adjust the air velocity from the touchscreen control panel, ensuring that the airflow does not affect the weighing process. The operation of the powder extraction hood is based on the principle that air is extracted from the work area through a pre-filter installed in the back panel. This creates a horizontal airflow from the user towards the back panel. All airborne particles are carried along in the airflow and cannot therefore be released uncontrollably into the environment. The airflow is filtered through an easily replaceable pre-filter and an absolute filter and then returned to the surrounding area. Hsdpfx Aozhvyaemyor Specifications: Made of high-quality HPL material Smooth finish both inside and out Custom solutions possible Installation and validation on-site Complies with all laws and regulations Fail-safe design Hermetic sealing Dimensions: 1838 × 610 × 600 mm, ESD tested, filter tested

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, It is made of "304 Cr N􀇕" quality material. It can be produced from 50 kg to 5000 kg. Areas of Use: It is used in powder chemical, spice, Hodpfxozhryis Amyjr feed, pharmaceutical and cosmetic 􀇕industries.

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Hjdpfx Amszdyh Hoyjr Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Conveyor length: 3000 mm, conveyor diameter: 250 mm, on-site inspection is possible, not energized. Hjdpfxszhnu Nj Amyjr

Year of construction: 2024, condition: not inspected (used), machine/vehicle number: S-D12MM, 1. Drinking Straw Applicator, Manufacturer: unknown (China) Type: SXTG-1B, Serial No.: S-D12MM, Year of manufacture: 2024, Connection power: 3.5 kW, LED screen, accessories. Note: The system has been dismantled and could not be tested for functionality. Location: 48653 Coesfeld Hodpezg Uk Usfx Amysr Category: Technical equipment

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW Hsdpfezc Nmwjx Amyor - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: used, Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Speed: Mixer speed: 5,6 rpm Content: 75 liters Driving force: 0.25kW. - Mixer drive 0.25 kW Dimensions: Length 800mm x Width 700mm x Height 1200mm Empty weight: 100 kg Technical doc.: No Message: Mixing drive 0,25 kW, speed 5,6 rpm Hsdpeiv Ic Eofx Amyer Condition: Used Price: On demand

Condition: like new (used), functionality: fully functional, Combination in as-new condition (hose L=3m and applicator gun are new), the glue unit has hardly been used. This unit features a 5 kg tank and two hose connections. The unit is equipped with a gear pump, ensuring a consistent and even output (no dead stroke as with an air pump). Now offered at a special price for this combination. Hjdoxr Itaepfx Amyer

Condition: used, axle configuration: 3 axles, first registration: 09/1999, color: other, Year of construction: 1999, Empty weight: 5.040 kg Axle 1: left 8 mm right 8 mm Hedpfx Amjy S T Iloyjr Axle 2: left 8 mm right 8 mm Axle 3: left 10 mm right 10 mm

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: K974.016, Plasma spraying system - Comfort control panel - Gas regulation cabinet for plasma - Power source PPC 2002 NG Hsdpfoym Ay Esx Amyjr - JamBox - Powder feeder PF 2/2 - Plasma torch - Plasma hose and cable set for 9MB - Sigma 67-2K water recooler with 2 cooling circuits for separate use of a 9MB and TopGun torch - Control cabinet - TS modem adapter

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total length: 24,000 mm, total height: 4,200 mm, type of input current: AC, warranty duration: 12 months, workpiece weight (max.): 9,500 kg, power: 48 kW (65.26 HP), input voltage: 380 V, temperature: 20 °C, input frequency: 50 Hz, heating capacity: 6 kW (8.16 HP), inner dimension length: 24,000 mm, inner dimension width: 4,200 mm, workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, waste water connection: 100 mm, feed length Y-axis: 16,000 mm, energy consumption: 42 kWh, insulation material: Steinwolle, insulation thickness: 50 mm, nominal power: 48 kW (65.26 HP), output voltage: 380 V, sheet thickness steel (max.): 3 mm, type of output current: AC, tank capacity: 4,000 l, number of previous owners: 1, number of chambers: 4, Equipment: lighting, This is a pre-treatment system in which metal parts are automatically cleaned using a spray process. Hodpfx Aszd Sm Ijmyjr

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Hodpfox Ah A Ajx Amyer Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 Hsdpezdupljfx Amyer 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Hsdpfx Aey N Ubzsmyer Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: used, 230 mm glue applicator, roller refurbished Specifications: • Condition – fully functional, after a comprehensive inspection • Working width – 230 mm • New rubber coating • One fixed speed • Manual height adjustment • 0.37 kW motor (1370 rpm) • Maximum working height ~ 200 mm • Overall dimensions: 80 x 60 x 75 cm (L x W x H) Additional information: • Very good technical condition, after a comprehensive refurbishment • The photos show the actual condition of the item for sale • The device can be switched on and tested on-site • The price listed in the auction does not include VAT and transport costs Financing and transport: Hodezdgbbepfx Amyer • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,300 mm, input voltage: 380 V, overall weight: 360 kg, roller diameter: 185 mm, height adjustment type: mechanical, working height: 120 mm, Roller glue spreader FIN SC2R-1300 Working width: 1300 mm Working height: 120 mm Manual roller gap adjustment Roller diameter: 185 mm CE certificate Power: 0.37 kW Hjdpfxsx Af Nye Amyer Weight: 360 kg

Condition: used, Year of construction: 2011, AABO Powder coating line Hsdpfx Ajyrnh Ejmysr

Condition: new, Year of construction: 2025, Oven / Dryer Technical Data: Working dimensions: 1200 x 3000 x 1800 mm Power consumption: 33 kW Maximum operating temperature: 230°C Equipment included: Internal trolley External trolley Hot air circulation system (even temperature distribution throughout the oven) Safety locks for secure opening and closing Powder Coating Booth Working dimensions: 2800 x 2200 mm Fan power: 2.2 kW Fan capacity: 10,500 m³/h Very quiet operation Hedpeg Uw Dkjfx Amyer Automatic filter cleaning system CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. Hedpfx Asy Aagijmyer ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: good (used), Stainless steel powder mixer conical mixer mixer mixing machine Mixing capacity +/- 130 liters Motor power 3kW 73rpm (recently renewed) Hodswyfu Tepfx Amysr Fully mobile Manually operated butterfly valve (food grade) Cover with hatch protection See our other advertisements VMA Wekerom

Condition: excellent (used), Automatic labeler, label applicator Zebra 110PAX4 /ct1899 Hsdpfx Ajtrly Djmysr Manufacturer: Zebra Type: 110PAX4 The product comes with full documentation and software.

Condition: used, input voltage: 380 V, Conveyor belt, double belt, applicator 550x1660 Size: 550 x 1660mm Power: 0.75kW, 220/380V, 3.3/1m92A Speed: 12m/min Hjdpfx Amsudvtweysr Cardan drive.

Condition: used, functionality: fully functional, Metering and application system Hydrotop 1 E400R + Ecotac_C for single-component (1K) PUR edge gluing for package dovetail joint systems Glue application – dovetail joint Hedoul Shnopfx Amyor Adhesive application – dovetail joint in very good condition functionality tested

Condition: used, Year of construction: 2022, The MAG 1 Peroni Ruggero is a modern, semi-automatic machine designed for manufacturers of premium packaging, magnetic boxes, and exclusive cardboard packaging. The machine combines several operations in a single work cycle, significantly increasing production efficiency and ensuring the highest precision. The machine performs milling of slots in solid cardboard, automatically applies hot-melt adhesive, and inserts magnets or metal plates into the prepared locations. This ensures that the entire process is fast, repeatable, and requires minimal operator intervention. The material is fed manually, while all key production steps are carried out automatically. An advanced positioning system guarantees accurate placement of the components, which translates into high-quality finished products and aesthetically pleasing packaging. The MAG 1 allows the application of 1 to 6 magnets or metal plates on one side of the packaging in a single work cycle, providing high production flexibility and the ability to handle diverse projects. The machine has been used sparingly and is in very good technical and visual condition, ready for immediate use in a production facility. Hodpfx Aezbtpgsmyer Key benefits: - Milling, gluing, and magnet application in a single work cycle - Handles 1 to 6 magnets or metal plates simultaneously - High precision and repeatability of the process - Dedicated to the production of magnetic boxes and premium packaging - Automatic application of hot-melt adhesive - High efficiency with limited operator intervention - Very good technical and visual condition - Year of manufacture: 2022 Technical data: - Manufacturer: PERONI RUGGERO - Model: MAG 1 - Year of manufacture: 2022 - Serial number: 007 Supported materials: - Solid (gray) cardboard with a thickness of 1.5 to 4 mm - Magnets with a diameter of 9.5 to 15 mm - Magnet thickness: 1 mm, 1.5 mm or 2 mm - Range of processed element: - Minimum width: 180 mm - Maximum width: 1550 mm Performance: - Up to 14 cycles/min when applying 1 magnet - Up to 8 cycles/min when applying 2 magnets Technical parameters: - Power: 5 kW - Compressed air consumption: 150 NL/min at 6 bar - Machine dimensions: - Length: 2500 mm - Width: 2500 mm The MAG 1 is an ideal solution for manufacturers of premium packaging who want to automate the magnet application process, increase production efficiency, and achieve the highest quality of finished products.